CasaCam GuardianCam Air VC800 Wireless Security Camera Instruction Manual

Introduction

This instruction manual provides essential information for the setup, operation, and maintenance of your CasaCam GuardianCam Air VC800 wireless security camera. This camera is designed as an add-on unit for existing CasaCam VS802 and VS1002 wireless security systems, offering 720p night vision, two-way audio, and weather-proof functionality. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.

Product Overview

The CasaCam GuardianCam Air VC800 is an AC-powered add-on camera designed to enhance your existing CasaCam wireless security system. It features advanced night vision, two-way audio, and is built to withstand various weather conditions.

Figure 1: CasaCam GuardianCam Air VC800 wireless security camera mounted on a brick wall.

Key components of the camera include:

• Antenna: For wireless signal transmission.
• Microphone: For two-way audio communication.
• Camera Lens: Captures 720p video.
• IR LED: Infrared LEDs for night vision.
• PIR Sensor: Passive Infrared sensor for motion detection.
• Speaker: For two-way audio output.

Figure 2: Labeled Components of the VC800 Camera, including antenna, microphone, camera lens, IR LED, PIR sensor, and speaker.

Compatibility

The CasaCam GuardianCam Air VC800 is designed as an add-on camera and is compatible with CasaCam VS802 and VS1002 wireless security systems. It is not compatible with VS2072, VS2104, and VS2004 systems.

Figure 3: CasaCam System Compatibility chart, indicating compatible and incompatible models.

Setup

Powering the Camera

The VC800 camera is AC powered and does not contain an internal battery. It requires a continuous power supply via the provided 16 ft power cable.

Figure 4: AC Power Connection diagram, illustrating how to connect the camera to power.

1. Connect the 16 ft power cable to the camera.
2. Plug the AC power adapter into a standard electrical outlet.
3. Ensure the antenna on the camera is securely tightened to ensure good contact for wireless signal.
4. Raise the two antennas on the top of the touchscreen monitor for optimal signal reception.

Pairing with Your System

Refer to your main CasaCam VS802 or VS1002 system manual for detailed instructions on how to pair an add-on camera. Typically, this involves accessing the system's camera setup menu and initiating a pairing process.

Operating Instructions

1. Touchscreen Responsiveness

If the touchscreen on your monitor is not responding well, ensure that any protective film from shipping has been removed. The film can reduce touch sensitivity. Using a stylus or the eraser end of a pencil can also improve interaction with the touchscreen.

2. Playing Back Recorded Video

To play back recorded video on the monitor, tap the SD card icon located in the upper left corner of the screen to access the recording file list. On your phone, open the MyCam View app and navigate to the event list to view recorded footage.

3. Motion-Triggered Recording

To check or adjust motion-triggered recording, observe the running man icon in the bottom left corner of the monitor. A red icon indicates that the motion trigger feature is active, while a blue icon means it is off. Tap this icon to toggle the feature on or off.

4. Remote Viewing from Phone App

For remote viewing via your phone app, the monitor needs to be connected to your router using an Ethernet cable. Once connected, a green icon will indicate that the system is ready for remote access. A yellow icon signifies no internet connection, and a red icon indicates no wire connection. If connection issues persist, try restarting both the monitor and your router, and ensure all cables are securely plugged in.

5. Resetting App Password

If you forget the password for your phone app, you can reset it to the default password (000000 - six zeros) through the monitor. Navigate to the monitor's menu, then General Settings, then Network Setup, and select Reset Password. Confirm the reset when prompted.

6. Adjusting Spotlight Brightness

The spotlight on the VS1002 camera can be dimmed if it is too bright. Access the Light Settings menu on your monitor to adjust the brightness levels (e.g., 25%, 50%, 75%, 100%).

7. Boosting Wireless Signal

To improve wireless signal strength, ensure the antenna on the camera is tightly secured. Also, raise the two antennas on the top of the touchscreen monitor. If the signal remains intermittent, consider purchasing a CasaCam antenna extension cable for the antenna to optimize placement and reception.

Helpful Video Guide

Watch this official video for a visual guide on common questions and operational tips for your CasaCam system, including touchscreen use, playback, motion detection, remote access, and password reset.

VS1002 vs. VS802 Camera Differences

While both the VS1002 (Spotlight Camera System) and VS802 (Night Vision Camera System) are compatible with the VC800 add-on camera and share the same monitor, there are key differences:

• VS1002 (Spotlight Camera): Features a traditional infrared camera combined with a bright security spotlight. Its housing is made of metal to effectively dissipate heat from the ultra-bright LED. It includes a separate motion sensor and a larger speaker, allowing for a longer motion detection range and louder two-way audio.
• VS802 (Night Vision Camera): Primarily an infrared camera for night vision. Its housing is made of plastic.

Both camera types are IP65 rated, making them suitable for outdoor use.

Figure 5: Visual Comparison of VS1002 Spotlight Camera and VS802 Night Vision Camera, highlighting their physical differences.

Troubleshooting

• Touchscreen Not Responding: Remove any protective film from the screen. Use a stylus or the eraser end of a pencil for better interaction.
• No Motion-Triggered Recording: Check the running man icon on the monitor. If it's blue, motion detection is off. Tap it to turn it red (on).
• No Playback File on App: Ensure the time zone and daylight saving time settings on your monitor are correct and match your phone's settings. Incorrect time settings can affect file indexing.
• Remote View Not Working / No Internet Connection: Verify the Ethernet cable is securely connected between the monitor and your router. If the internet icon is yellow, there's no internet connection; try restarting the monitor and router. If it's red, there's no wire connection; check cable plugs.
• Forgot App Password: You can reset the app password to the default "000000" (six zeros) via the monitor's menu: General Settings > Network Setup > Reset Password.
• Weak Wireless Signal: Tighten the camera's antenna and ensure the monitor's antennas are raised. For extended range, consider a CasaCam antenna extension cable.

Specifications

Maintenance

The CasaCam GuardianCam Air VC800 is designed to be weather-proof (IP65 rated) for both indoor and outdoor use. To ensure longevity and optimal performance:

• Cleaning: Periodically wipe the camera lens and housing with a soft, damp cloth to remove dust and debris. Avoid using harsh chemicals that could damage the finish or lens.
• Cable Inspection: Regularly check the power cable for any signs of wear or damage, especially if installed outdoors.
• Antenna Connection: Ensure the antenna remains tightly secured to maintain a strong wireless signal.

Warranty and Support

For warranty information, technical support, or service inquiries, please contact HomeTech LLC, the manufacturer of CasaCam products. Refer to the contact information provided with your original purchase documentation or visit the official CasaCam website for assistance.