Introduction
This manual provides instructions for the POWE-Tech AC/DC Adapter Charger (Model: fav-015), designed as a replacement power supply for the Rally 7471 Portable 8-in-1 Power Source Jump Starter and other compatible devices. This adapter ensures reliable power delivery with built-in safety features.
Image: POWE-Tech AC/DC Adapter Charger with various interchangeable tips.
Setup
- Identify Device Power Requirements: Before connecting, check the power requirements (voltage and amperage) of your device. This information is usually found on a label on the device itself or in its original manual. The POWE-Tech adapter provides 12V output.
- Select the Correct Tip: The adapter comes with multiple interchangeable tips to ensure compatibility with various devices. Select the tip that matches your device's power input port.
Image: Close-up view of the various interchangeable tips included with the adapter.
- Attach the Tip: Securely attach the selected tip to the adapter's output cable. Ensure it clicks into place or fits snugly to prevent loose connections.
- Connect to Device: Plug the attached tip into your device's power input port.
- Connect to Power Outlet: Plug the AC/DC adapter into a standard 100V-240V wall power outlet.
Operating Instructions
- Once connected, the adapter will begin supplying power to your device.
- For devices with rechargeable batteries, the intelligent switching circuit will detect a full battery and automatically switch to a safe mode to prevent overcharging.
- Monitor your device's charging indicator (if available) to confirm it is receiving power and charging correctly.
Maintenance
- Keep the adapter and its tips clean and free from dust and debris. Use a dry, soft cloth for cleaning.
- Store the adapter in a cool, dry place when not in use.
- Avoid bending or crimping the power cord excessively to prevent internal wire damage.
- Do not expose the adapter to moisture or extreme temperatures.
Troubleshooting
- Device not powering on/charging:
- Ensure the adapter is securely plugged into both the wall outlet and the device.
- Verify that the correct tip is used and is firmly attached to the adapter cable.
- Check the wall outlet by plugging in another device to confirm it is functional.
- Confirm the device's power requirements match the adapter's output (12V).
- Adapter feels hot:
- It is normal for adapters to feel warm during operation. However, if it becomes excessively hot to touch, disconnect it immediately.
- Ensure adequate ventilation around the adapter and avoid covering it.
- Verify that the device's power consumption does not exceed the adapter's wattage (60W) or amperage (0.25A).
- Intermittent connection:
- Check for any damage to the adapter cable or tips.
- Ensure the tip fits snugly into the device's port without wobbling.
Specifications
| Brand | POWE-Tech |
| Model Number | fav-015 |
| Input Voltage | 100V - 240V (Worldwide compatible) |
| Output Voltage | 12 Volts |
| Amperage | 0.25 Amps |
| Wattage | 60 Watts |
| Connector Type | Barrel connector with multiple interchangeable tips |
| Special Feature | Short Circuit Protection, Intelligent Switching Circuit |
| Compatible Devices | Rally 7471 Portable 8-in-1 Power Source Jump Starter Power Supply, and other devices requiring 12V DC power with compatible tips. |
| Item Weight | 5 ounces |
| Package Dimensions | 6.7 x 4.69 x 2.32 inches |
Warranty
Please refer to the retailer's return policy for information regarding product returns or exchanges. For specific warranty details, contact POWE-Tech customer service directly.
Support
For further assistance or inquiries, please visit the POWE-Tech official website or contact their customer support channels. Ensure you have your product model number (fav-015) available when seeking support.
Related Videos
No official seller videos are available for this product at this time.
