WONNIE 10-inch Dual Screen Car DVD Player Instruction Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your WONNIE 10-inch Dual Screen Car DVD Player. Please read this manual thoroughly before using the product to ensure proper function and longevity.

Image: The WONNIE 10-inch Dual Screen Car DVD Player, featuring two screens showing children enjoying content. A small snowman figure is attached to one screen.

Package Contents

Verify that all items listed below are included in your package:

• 1 x Main Car DVD Player
• 1 x Slave Car Monitor
• 1 x Remote Control
• 2 x Car Mounting Brackets
• 2 x Headrest Straps
• 1 x AC Adapter
• 1 x Car Charger
• 1 x AV Cable
• 1 x RCA Cable
• 1 x DC Cable
• 1 x User Manual

Key Features

• Dual 10.1-inch Display Screens: Allows simultaneous playback of the same movie on both the main DVD player and the slave monitor.
• Extensive Media Compatibility: Supports DVD, DVD-R/+R, DVD+RW/-RW, CD, CD-R/RW, VCD, SVCD (Blu-ray discs not supported). Also plays VOB, AVI, MPEG1, MPEG2, XVID, MP3, WMA, JPG, JPEG files from USB/SD/MMC (up to 32GB memory & 720*576 pixel).
• Long Battery Life: Main DVD player features a 5000mAh rechargeable lithium battery, providing up to 5 hours of standalone use or up to 3 hours when both screens are connected. Includes AC adapter and 12V car charger for extended use.
• Enhanced Audio: Each unit is equipped with dual stereo speakers for clear sound. Headphone jacks are available for private listening or external speaker connection.
• TV Sync Functionality: Connect the main DVD player to a home TV using the provided RCA cable to mirror content on a larger screen.
• Last Memory Function: Resumes playback from where it was last stopped.

Setup

Car Installation

The WONNIE Dual Screen Car DVD Player can be installed in your vehicle using either the mounting brackets or headrest straps provided.

Image: A visual guide demonstrating the six steps to install the DVD player onto a car headrest using mounting brackets.

1. Attach the mounting bracket to the headrest posts.
2. Secure the bracket by tightening the screws.
3. Slide the DVD player onto the secured mounting bracket.
4. Ensure the player is firmly seated and locked into place.
5. Open the DVD player lid to insert a disc.
6. Adjust the screen for optimal viewing.

Connecting Dual Screens

To play the same content on both the main DVD player and the slave monitor:

• Connect the main DVD player to the slave monitor using the provided DC Cable and AV Cable.
• Ensure both units are powered on.
• The slave monitor will automatically display the content playing on the main DVD player.

Image: A diagram illustrating the connection between the main DVD player and the slave monitor with DC and AV cables, enabling synchronized playback.

Operating Instructions

Powering On/Off

• Press the POWER button on the unit or remote control to turn the player on or off.
• Connect the AC adapter for home use or the car charger for in-vehicle use.

Disc Playback

• Open the disc compartment cover.
• Carefully place a compatible DVD or CD onto the spindle, label side up.
• Close the disc compartment cover. The player will automatically begin reading the disc.
• Use the remote control or unit buttons (PLAY/PAUSE, STOP, NEXT/PREV) to control playback.

USB/SD Media Playback

• Insert a USB drive or SD/MMC card (up to 32GB) into the corresponding slot on the main DVD player.
• The player will detect the media and display a menu to select file types (Video, Music, Photo).
• Navigate through files using the UP/DOWN/LEFT/RIGHT and OK buttons on the unit or remote.

Image: An illustration detailing the multiple disc and media formats supported by the player, including DVD, VOB, AVI, MPEG, MP3, WMA, JPG, and JPEG, with visual representations of USB and SD card inputs.

Connecting to an External TV

To view content on a larger screen:

• Connect the main DVD player to your TV using the provided RCA Cable (red, white, yellow connectors).
• Select the appropriate AV input on your TV.
• The content playing on the DVD player will now be displayed on your TV.

Image: A family watching a movie on a large television screen, which is connected to the WONNIE DVD player via an RCA cable, demonstrating the TV sync feature.

Battery Information

The main DVD player has a built-in 5000mAh rechargeable lithium battery. For optimal battery life:

• Fully charge the battery before first use.
• Use the provided AC adapter or car charger for charging.
• Avoid exposing the player to extreme temperatures.

Image: A visual representation of the player's 5000mAh battery, highlighting its capacity for up to 5 hours of use, alongside icons for built-in battery, car charger, and AC adapter.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the screens and exterior. Do not use liquid cleaners or abrasive materials.
• Disc Care: Handle discs by their edges. Store them in their cases to prevent scratches. Clean dirty discs with a soft, lint-free cloth wiping from the center outwards.
• Storage: When not in use for extended periods, store the player in a cool, dry place away from direct sunlight and extreme temperatures.
• Cables: Ensure all cables are connected securely and are not bent or pinched, which can cause damage.

Troubleshooting

Specifications

• Model Number: UYXJD0912
• Screen Size: 10 Inches
• Display Type: LCD
• Product Dimensions: 12.2 x 9.2 x 5.2 inches
• Item Weight: 4 pounds
• Battery: 1 Lithium Metal battery (included)
• Media Type Supported: CD, CD-R/+R, CD-RW/+RW, DVD, DVD-R/+R, DVD-RW/DVD+RW, SVCD, VCD
• Color: Black
• Manufacturer: WONNIE

Warranty and Support

WONNIE provides the following support for this product:

• Return & Refund Policy: Unconditional return and refund within 30 days of purchase.
• Replacement & Refund Policy: 365 days replacement and refund for any product issues.
• Technical Support: Lifetime technical support is available. For any problems, please contact WONNIE customer service for assistance. Replies are typically provided within 24/7.