Introduction
Thank you for purchasing the Divoom Airbeat 30 Portable Bluetooth Speaker. This compact and powerful speaker features a sensational LED color effect ring, IP44 water resistance, and optional TWS stereo pairing. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure you get the best experience from your device.
Setup
1. Charging the Speaker
Before first use, fully charge your Divoom Airbeat 30 speaker. Connect the provided charging cable to the speaker's charging port and a compatible USB power source. The LED indicator will show charging status.
2. Power On/Off
To power on the speaker, press and hold the power button (usually marked with a power symbol) for a few seconds until you hear an audible prompt or see the LED lights activate. To power off, press and hold the power button again.
3. Bluetooth Pairing
- Ensure the speaker is powered on and in pairing mode. The LED indicator will typically flash to indicate it's ready to pair.
- On your mobile device (smartphone, tablet, etc.), enable Bluetooth.
- Search for available Bluetooth devices. You should see "Airbeat-30" in the list.
- Select "Airbeat-30" to connect. Once connected, the speaker will provide an audible confirmation, and the LED indicator will change to a solid light.
Image: Divoom Airbeat 30 speakers in various colors, illustrating the compact design and LED light feature.
4. TWS Pairing (True Wireless Stereo)
For an enhanced stereo sound experience, you can pair two Divoom Airbeat 30 speakers together.
- Ensure both Airbeat 30 speakers are powered on and not connected to any other Bluetooth device.
- On one of the speakers (this will be the primary speaker), press the TWS pairing button (refer to your speaker's button layout for the specific button, often indicated by a chain link or 'TWS' symbol).
- The primary speaker will search for the secondary speaker. Once connected, both speakers will provide an audible confirmation.
- Now, connect your mobile device to the primary speaker via Bluetooth as described in the "Bluetooth Pairing" section. Both speakers will play audio in stereo.
Operating Instructions
1. Music Playback
- Play/Pause: Press the Play/Pause button once to play or pause music.
- Next Track: Press and hold the Volume Up button or a dedicated 'Next' button.
- Previous Track: Press and hold the Volume Down button or a dedicated 'Previous' button.
- Volume Control: Press the Volume Up (+) or Volume Down (-) buttons to adjust the volume.
2. LED Aura Light Modes
The Divoom Airbeat 30 features an integrated LED Aura light ring with 16 million colors. The light rhythm can synchronize with your music.
- Change Light Mode: Press the dedicated LED light button (if available) or a multi-function button to cycle through different light modes.
- Turn Lights On/Off: Press and hold the LED light button to turn the lights on or off.
3. Hands-Free Calling
With its built-in microphone, the Airbeat 30 allows for hands-free calling when connected to your smartphone.
- Answer Call: Press the Play/Pause button once to answer an incoming call.
- End Call: Press the Play/Pause button once during a call to end it.
- Reject Call: Press and hold the Play/Pause button to reject an incoming call.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the speaker. Do not use abrasive cleaners or solvents.
- Water Resistance: The speaker has an IP44 rating, meaning it is resistant to splashing water from any direction. Do not submerge the speaker in water. Ensure the charging port cover is securely closed to maintain water resistance.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the speaker frequently. Charge it regularly, even if not in use for extended periods.
Troubleshooting
| Problem | Solution |
|---|---|
| Speaker does not power on. | Ensure the speaker is fully charged. Connect it to a power source and try again. |
| Cannot pair via Bluetooth. |
|
| No sound or low volume. |
|
| TWS pairing fails. |
|
Specifications
| Feature | Detail |
|---|---|
| Brand | Divoom |
| Model Number | AirBeat-30 |
| Connectivity Technology | Bluetooth |
| Bluetooth Version | V5.0 |
| Speaker Type | Portable Bluetooth Speaker |
| Special Features | Shockproof, Built-in Microphone, Portable Wireless, LED Aura Light Ring |
| Speaker Output Power | 4 Watts |
| Water Resistance Rating | IP44 |
| Battery Capacity | 1000 mAh |
| Playback Time | Up to 6 hours |
| Product Dimensions (L x W x H) | 6.86 x 6.86 x 7.87 cm |
| Item Weight | 2.11 kilograms (approx. 4.65 pounds) |
| Color | Red (specific model color) |
Warranty Information
Divoom products typically come with a limited manufacturer's warranty. Please refer to the warranty card included in your product packaging or visit the official Divoom website for detailed warranty terms and conditions. Keep your proof of purchase for warranty claims.
Customer Support
If you encounter any issues not covered in this manual or require further assistance, please contact Divoom customer support through their official website or the contact information provided in your product packaging. You may also find FAQs and additional resources online.
