Homelegance 6-Piece Dining Set Instruction Manual

Introduction

This instruction manual provides detailed guidance for the assembly, operation, maintenance, and care of your new Homelegance 6-Piece Dining Set. Please read all instructions carefully before beginning assembly and retain this manual for future reference. This set is designed to offer a stylish and comfortable dining experience for your home.

Package Contents

Verify that all components listed below are present before beginning assembly:

• Dining Table Top x 1
• Dining Table Legs x 4
• Chair Back with Leg x 4
• Chair Seat x 4
• Chair Front Leg x 8
• Bench Seat x 1
• Bench Legs x 4
• Hardware Set x 3 (for table, chairs, and bench)

Setup and Assembly

Assembly is required for this dining set. It is recommended that two adults perform the assembly, which typically takes approximately 45 minutes.

1. Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, clean surface to prevent scratches.
2. Assemble the Table: Attach the four table legs to the table top using the provided hardware. Ensure all bolts are securely tightened, but do not overtighten.
3. Assemble the Chairs: For each chair, attach the chair back with legs to the chair seat, then attach the two front legs. Secure all connections with the provided hardware.
4. Assemble the Bench: Attach the four bench legs to the bench seat using the provided hardware.
5. Final Tightening: Once all components are assembled, gently re-tighten all bolts to ensure stability. Avoid excessive force to prevent damage.

Homelegance 6-Piece Dining Set fully assembled, showcasing the table, four cross-back chairs, and bench in a gray finish.

Diagram showing the dimensions of the dining table: 60 inches wide, 36 inches deep, and 30.5 inches high.

Diagram showing the dimensions of a dining chair: 18 inches wide, 20.5 inches deep, and 39.5 inches high, with a seat height of 19.5 inches.

Operating Instructions

Your Homelegance dining set is designed for everyday use. The table comfortably seats 6 people, with each chair and the bench supporting up to 250 lbs.

• Seating Arrangement: The set includes a table, four chairs, and one bench. The bench can be positioned on either side of the table or against a wall to optimize space.
• Stability: Periodically check and re-tighten all bolts to maintain the stability of the table, chairs, and bench.

Maintenance and Care

Proper care will extend the life and appearance of your dining set:

• Cleaning: Wipe the table and chair surfaces with a dry cloth. For upholstered faux leather seats, wipe clean with a damp cloth and mild soap if necessary, then dry immediately.
• Protection: Use coasters and placemats to protect the tabletop from heat, moisture, and scratches.
• Avoid Harsh Chemicals: Do not use abrasive cleaners or strong chemical solutions, as these can damage the finish and upholstery.
• Safety: Keep the furniture away from naked flames or direct heat sources. Do not allow horseplay on or under the chairs or bench. Do not stand or jump on the table, chairs, or bench.

Troubleshooting

If you encounter any issues with your dining set, consider the following:

• Wobbly Furniture: Ensure all bolts are securely tightened. If wobbling persists, check that the furniture is on a level surface.
• Surface Damage: Minor scratches or marks on the wood finish may be addressed with furniture repair pens or polishes designed for wood.
• Upholstery Stains: For stubborn stains on faux leather, use a specialized faux leather cleaner, testing on an inconspicuous area first.

Specifications

Warranty and Support

This Homelegance dining set includes a 1-year warranty against manufacturer defects. For warranty claims or product support, please refer to the product description or contact the seller, Bison Commerce, directly.

Seller: Bison Commerce

Return Policy: 30-day easy returns