Bush Furniture Somerset 72W 3 Position Sit to Stand L Shaped Desk User Manual

1. Product Overview

The Bush Furniture Somerset 72W 3 Position Sit to Stand L Shaped Desk is designed to enhance your workspace with ergonomic versatility. This desk features a mechanical Lift-n-Lock system, allowing you to easily transition between seated and standing positions. It includes integrated storage and wire management solutions for an organized environment.

Image 1.1: The Bush Furniture Somerset L Shaped Desk in Ash Gray, showcasing its overall design and the sit-to-stand return.

Image 1.2: The Somerset L Shaped Desk positioned in a modern office environment, demonstrating its functional and aesthetic integration.

Key Features:

• 42W Sit to Stand Return attaches to either side of the 72W Office Desk.
• Lift-n-Lock Desktop with 3 standing height positions: 35, 38, or 41 inches.
• Integrated wire management grommets.
• File drawer for legal and letter size documents.
• Box drawer for office supplies.

2. Safety Information

Please read all safety instructions carefully before assembly and use. Failure to follow these guidelines may result in injury or damage to the product.

• Weight Limit: Do not exceed the weight limit of 20 pounds on the Sit to Stand Return when it is in the elevated position. The overall maximum weight recommendation for the desk is 200 pounds.
• Stability: Ensure the desk is assembled correctly and placed on a level surface to prevent tipping.
• Assembly: Assembly requires two people. Follow all steps in the provided assembly guide.
• Moving the Desk: Always lift the desk when moving it. Do not drag, as this can damage the legs or frame.
• Children and Pets: Keep children and pets away from the desk during assembly and operation of the height adjustment mechanism.

3. Setup and Assembly

This product requires assembly. An estimated two people are recommended for assembly. Please refer to the separate, detailed assembly guide included in your product packaging for step-by-step instructions, diagrams, and a complete list of parts and hardware.

Recommended Tools for Assembly:

• Hammer
• Screwdriver

Important Assembly Notes:

• Unpack all components and verify against the parts list before beginning.
• Identify the desired side for the Sit to Stand Return (left or right) before starting assembly, as this affects certain steps.
• Do not overtighten screws.
• Ensure all cam locks are securely fastened.

4. Operating Instructions

4.1. Adjusting the Sit to Stand Return

The Sit to Stand Return features a mechanical Lift-n-Lock system that allows for easy height adjustment without the need for electricity.

Image 4.1: Diagram illustrating the three available locking height positions (37, 40, and 43 inches) for the Sit to Stand Return.

1. To Raise: Gently lift the desktop of the Sit to Stand Return. The internal mechanism will engage, allowing you to raise it to one of the three preset standing heights.
2. To Lock: Once at the desired height (35, 38, or 41 inches), ensure the desktop clicks securely into place. Do not force it.
3. To Lower: Lift the desktop slightly to disengage the lock, then gently guide it back down to the seated position. The counter-balanced design will assist in a smooth lowering motion.

Caution: Do not place more than 20 pounds on the Sit to Stand Return when it is in an elevated position.

Image 4.2: A detailed view of the mechanical Lift-n-Lock system, showing the components responsible for height adjustment.

4.2. Using the Drawers

The desk includes a file drawer and a box drawer for storage.

• File Drawer: The bottom drawer is designed to accommodate legal and letter-sized documents. It operates on full-extension ball bearing slides for smooth access.
• Box Drawer: The top drawer provides convenient storage for smaller office supplies and utensils.

Image 4.3: The file drawer shown open, revealing its capacity for organizing legal and letter-sized documents.

4.3. Wire Management

Wire management grommets are integrated into both the main desk surface and the Sit to Stand Return to help keep cables organized and out of sight.

5. Maintenance and Care

Proper care will ensure the longevity and appearance of your Bush Furniture Somerset desk.

• Cleaning: Wipe surfaces with a damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
• Spills: Clean up spills immediately to prevent staining or damage to the engineered wood.
• Hardware: Periodically check and tighten all hardware to ensure stability.
• Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading of the finish.

6. Troubleshooting

6.1. Sit to Stand Return Not Locking/Lowering Smoothly

• Check Weight: Ensure the weight on the elevated surface does not exceed 20 pounds. Excessive weight can hinder the mechanism.
• Obstructions: Verify there are no obstructions preventing the mechanism from moving freely.
• Mechanism Alignment: If the issue persists, gently lift and lower the desktop a few times to help realign the internal components.

6.2. Drawers Sticking or Not Closing Properly

• Overload: Ensure drawers are not overloaded, which can cause them to stick.
• Obstructions: Check for any items obstructing the drawer slides.
• Slide Alignment: Verify that the drawer slides are properly aligned and free of debris.

6.3. Desk Wobbles

• Level Surface: Ensure the desk is placed on a flat, level surface.
• Tighten Hardware: Re-check and tighten all assembly hardware.

7. Specifications

Image 7.1: Technical diagram displaying the overall dimensions of the L Shaped Desk in both inches and centimeters.

8. Warranty and Support

8.1. Manufacturer's Warranty

This Bush Furniture product is backed by a 6-Year Manufacturer's Warranty. This is a Full Warranty covering defects in materials and workmanship under normal use.

For specific details regarding warranty coverage, claims, or to register your product, please refer to the warranty documentation included with your purchase or visit the official Bush Furniture website.

8.2. Customer Support

If you have any questions, require assistance with assembly, or need to report missing or damaged parts, please contact Bush Furniture customer support. Contact information can typically be found in your assembly guide or on the Bush Furniture website.