COSTWAY 18 Inch Industrial Vintage Stackable Metal Dining Chair Set

Introduction

This manual provides essential information for the assembly, operation, and maintenance of your COSTWAY 18 Inch Industrial Vintage Stackable Metal Dining Chair Set. Please read these instructions carefully before use to ensure proper setup and longevity of your chairs.

Image: Four chairs from the COSTWAY 18 Inch Industrial Vintage Stackable Metal Dining Chair Set.

Safety Information

Adhere to the following safety guidelines to prevent injury and damage:

• Maximum weight capacity is 300 lbs per chair. Do not exceed this limit.
• Follow all assembly instructions precisely.
• Exercise caution when stacking and storing chairs to prevent tipping or falling.
• Ensure the detachable backrest is properly and securely assembled before use.
• Regularly check the non-slip rubber foot caps for proper function and wear to protect floors and maintain stability.

Parts List

Before assembly, verify that all components are present and undamaged:

• Metal Chair Frame (x4)
• Elm Wood Seat (x4)
• Detachable Backrest (x4)
• Hardware Pack (screws, washers, Allen wrench)
• Non-slip Rubber Foot Caps (pre-installed or included)

Setup and Assembly

The chairs require assembly. The process is straightforward with all necessary hardware included. Refer to the detailed user manual provided with your product for step-by-step instructions.

1. Unpack all components and lay them out on a clean, soft surface to prevent scratches.
2. Attach the elm wood seat to the metal chair frame using the provided screws. Ensure the seat is aligned correctly.
3. Secure the detachable backrest to the chair frame. Ensure all screws are tightened for stability.
4. Verify that the non-slip rubber foot caps are firmly in place on each leg.
5. Once assembled, gently test the chair for stability before full use.

Image: Key features of the chair, including the ergonomic backrest, wood seat, cross brace, and rubber feet.

Operating Instructions

These chairs are designed for seating in various indoor environments such as dining rooms, kitchens, cafes, bistros, and restaurants. The stackable design allows for efficient storage when not in use.

• To use: Place the chair on a flat, stable surface.
• To stack: Lift each chair and carefully place it on top of another, ensuring the legs interlock securely to prevent instability.

Image: Chairs demonstrating their stackable design for convenient storage.

Maintenance

To maintain the appearance and longevity of your chairs:

• Cleaning: The powder-coated surface and elm wood seat are waterproof and can be easily cleaned with a damp cloth. Avoid abrasive cleaners that may damage the finish.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Tighten if necessary.
• Storage: When not in use, especially for extended periods, store chairs in a dry, indoor environment. Utilize the stackable feature to save space.

Troubleshooting

If you encounter any issues with your chairs, consider the following:

• Wobbling: Check that all screws are securely tightened. Ensure the chair is on a flat, even surface. Adjust the non-slip foot caps if they are uneven.
• Difficulty Stacking: Ensure chairs are aligned correctly before stacking. Do not force them, as this may cause damage.
• Scratches on Floor: Verify that the non-slip rubber foot caps are intact and properly seated. Replace if worn or missing.

Specifications

Image: Detailed dimensions of the dining chair.

Warranty and Support

For warranty information or customer support, please refer to the documentation included with your purchase or contact COSTWAY customer service directly. Specific warranty terms may vary.