Introduction
Thank you for purchasing the DEVAISE 3-Drawer Mobile Office Cabinet. This manual provides essential information for the safe and efficient use of your new office cabinet. Please read these instructions carefully before assembly and operation, and retain them for future reference.
Image: The DEVAISE 3-Drawer Mobile Office Cabinet, black, positioned next to a desk in an office environment.
Safety Information
- Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
- Assemble the cabinet on a soft, clean surface to prevent scratches.
- Do not overload the drawers or the top surface. Refer to the 'Specifications' section for maximum load capacities.
- Always lock the casters when the cabinet is in a stationary position to prevent accidental movement.
- When opening drawers, especially the bottom one, ensure the cabinet is stable. The anti-tip caster on the bottom drawer helps prevent tipping.
- Keep keys in a safe place away from children.
Package Contents
Please verify that all the following items are included in your package:
- DEVAISE 3-Drawer Mobile Office Cabinet (Main Unit)
- Keys (2 pieces)
- Pen Tray (1 piece)
- Dividers (2 pieces)
- Casters (4 standard, 1 anti-tip for bottom drawer)
Image: A visual representation of the included accessories: one pen tray, two drawer dividers, and two keys for the all-lock system.
Setup
The DEVAISE 3-Drawer Mobile Office Cabinet comes partially assembled. Only the casters require attachment.
- Carefully remove the cabinet from its packaging.
- Lay the cabinet on its side on a soft, protected surface to access the bottom.
- Insert the four standard casters into the designated holes at each corner of the cabinet base. Twist clockwise until securely fastened.
- Locate the fifth, smaller anti-tip caster. This caster is designed to be installed under the front center of the bottom drawer. Attach it securely. This caster provides stability when the bottom drawer is fully extended.
- Carefully lift the cabinet upright.
- Ensure all casters rotate smoothly and the cabinet is stable. Lock the casters if you intend for the cabinet to remain stationary.
Image: A detailed view of a caster wheel, highlighting its 360-degree rotation capability and the locking lever for stability.
Operating Instructions
Drawer Usage
The cabinet features three drawers designed for full extension, allowing easy access to contents even at the back.
- To open a drawer, pull the handle firmly. The smooth-gliding mechanism ensures effortless operation.
- To close, push the drawer until it clicks securely into place.
- The bottom drawer is equipped with an additional anti-tip caster for enhanced stability when fully open.
Image: The bottom drawer fully extended, demonstrating the ease of retrieving items from the back.
Drawer Organization
- The top drawer includes a removable pen tray, ideal for organizing small stationery items such as pens, clips, and sticky notes.
- The bottom drawer is designed to accommodate A4-sized files, both horizontally and vertically. Use the two provided dividers to categorize and separate your documents efficiently.
Image: The top drawer with a pen tray for small items, and the second drawer with adjustable dividers for organization.
Image: The bottom drawer showcasing its compatibility with A4 files, neatly arranged with the included dividers.
All-Lock System
For enhanced security, the cabinet features an all-lock system. Inserting and turning the key in the top drawer's lock simultaneously secures all three drawers.
- To lock all drawers: Ensure all drawers are fully closed. Insert the key into the lock on the top drawer and turn it clockwise until the lock engages. Remove the key.
- To unlock all drawers: Insert the key into the lock on the top drawer and turn it counter-clockwise until the lock disengages.
Image: The key in the top drawer's lock, illustrating the all-lock feature that secures all three drawers simultaneously for privacy and document protection.
Mobility and Caster Locks
The cabinet is equipped with smooth-rolling casters for easy relocation. Each standard caster includes a locking mechanism.
- To move the cabinet: Ensure all caster locks are disengaged.
- To secure the cabinet in place: Press down on the lever located on each caster to engage the lock. This prevents unintended movement.
Maintenance
- Cleaning: Wipe the cabinet surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, as they may damage the rust-proof coating. Dry thoroughly after cleaning.
- Drawer Slides: Periodically check the drawer slides for any debris. If drawers become stiff, a small amount of silicone lubricant can be applied to the slides.
- Casters: Keep casters free of hair and debris to ensure smooth movement.
- Locks: Do not force the key if it feels stuck. Ensure the key is fully inserted and aligned before turning.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Drawers do not slide smoothly. | Debris in slides; slides need lubrication; drawer overloaded. | Clean slides; apply silicone lubricant; reduce drawer load. |
| All-lock system not engaging/disengaging. | Drawers not fully closed; key not fully inserted or aligned; lock mechanism obstruction. | Ensure all drawers are completely closed; check key insertion and alignment; inspect lock for obstructions. |
| Cabinet moves unintentionally. | Caster locks disengaged. | Engage all caster locks by pressing down on the levers. |
| Bottom drawer feels unstable when open. | Anti-tip caster not installed or damaged; drawer overloaded. | Verify anti-tip caster is correctly installed and functional; reduce load in the bottom drawer. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | AHDG602BL |
| External Dimensions (W x D x H) | 390 mm x 480 mm x 600 mm |
| Main Unit Weight | 17.78 kg |
| Material | Alloy Steel (Steel with rust-proof coating) |
| Number of Drawers | 3 |
| Locking Mechanism | 3-Drawer All-Lock System |
| Mobility | Casters with locks (including anti-tip caster for bottom drawer) |
| Load Capacity - Top Plate | 50 kg |
| Load Capacity - Upper Drawer | 10 kg |
| Load Capacity - Middle Drawer | 10 kg |
| Load Capacity - Bottom Drawer | 20 kg |
| Assembly Required | Partial (Caster attachment only) |
Image: A detailed diagram illustrating the external dimensions (39x48x60cm) and individual load capacities for the top surface and each drawer.
Warranty and Support
This DEVAISE product comes with a 1 Year Warranty Against Manufacturer Defects. This warranty covers defects in materials and workmanship under normal use.
If you encounter any issues with your product or have questions not covered in this manual, please contact DEVAISE customer support through your retailer or the official DEVAISE website. Please have your model number (AHDG602BL) and proof of purchase ready when contacting support.
