1. Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of the Airlive SK-104-ETSI-UK Smart Home Kit. This kit is designed to enhance home automation and security through Z-Wave Plus technology, offering remote access and control capabilities.
The Airlive SK-104-ETSI-UK Starter Kit includes essential components for establishing a smart home environment, focusing on ease of installation and reliable performance.
2. Kit Components
The Airlive SK-104-ETSI-UK Smart Home Kit includes the following primary components:
- Airlive SG-101 Smart Home Gateway: Functions as the central hub with Siren, Z-Wave, Wi-Fi Access Point, and LAN connectivity.
- Airlive SmartCube 300W Wi-Fi IP Camera: A 3-megapixel camera with two-way audio and IR night vision for security monitoring.
- Airlive SI-101 3-in-1 Sensor: Combines Door/Window, Illumination, and Temperature sensing capabilities using Z-Wave Plus.
- Airlive SP-101 Smart Plug: A Z-Wave Plus enabled smart plug that also functions as a signal extender.
- Airlive SI-102 Motion Sensor: A Z-Wave Plus motion sensor with cover for enhanced security.
Figure 2.1: Overview of the Airlive SK-104-ETSI-UK Smart Home Kit components. This image displays the main gateway, IP camera, door/window sensor, smart plug, and motion sensor, illustrating the complete package.
3. Setup and Installation
3.1. Initial Setup of the Smart Home Gateway (SG-101)
- Power On: Connect the SG-101 gateway to a power outlet using the provided power adapter.
- Network Connection: Connect the gateway to your home router via an Ethernet cable for initial setup, or configure Wi-Fi connectivity through the mobile application.
- Mobile Application: Download the "AirLive Smart Life" application from your device's app store (iOS/Android).
- Account Creation: Open the app and create a new user account or log in if you already have one.
- Add Gateway: Follow the in-app instructions to add your SG-101 gateway to your account. This typically involves scanning a QR code on the device or entering its serial number.
3.2. Pairing Z-Wave Devices
Once the gateway is set up, you can begin pairing the Z-Wave devices included in the kit:
- Enter Pairing Mode: In the AirLive Smart Life app, navigate to the Z-Wave device management section and select "Add Device" or "Inclusion Mode."
- Activate Device: For each Z-Wave device (SmartCube 300W, SI-101, SP-101, SI-102), follow its specific instructions to activate pairing mode. This usually involves pressing a button on the device.
- Confirmation: The app will confirm when the device has been successfully paired. Assign a name and location to each device for easy identification.
Note: Z-Wave Plus devices act as repeaters, extending the network range. Place the Smart Plug (SP-101) strategically to improve network coverage.
4. Operating Instructions
4.1. Using the AirLive Smart Life App
The AirLive Smart Life app is your primary interface for controlling and monitoring your smart home system.
- Dashboard: View the status of all connected devices at a glance.
- Device Control: Tap on individual devices to control them (e.g., turn smart plug on/off, view camera feed, check sensor readings).
- Scenes and Automations: Create custom scenes (e.g., "Good Morning" to turn on lights and open blinds) and automations (e.g., turn on camera when motion is detected).
- Notifications: Configure alerts for security events (e.g., door opened, motion detected).
- Remote Access: Control your home from anywhere with an internet connection.
4.2. Google Home Integration
The Airlive Smart Home system supports integration with Google Home for voice control.
- Link Accounts: In the Google Home app, navigate to "Set up device" > "Works with Google" and search for "AirLive Smart Life."
- Authorize: Log in with your AirLive Smart Life account credentials to link the services.
- Assign Devices: Assign your smart home devices to specific rooms in the Google Home app.
- Voice Commands: You can now use voice commands like "Hey Google, turn on the living room light" (if connected to a smart plug) or "Hey Google, show me the front door camera."
5. Maintenance and Care
- Cleaning: Use a soft, dry cloth to clean the exterior of all devices. Avoid abrasive cleaners or solvents.
- Firmware Updates: Regularly check the AirLive Smart Life app for firmware updates for your gateway and devices. Updates often include performance improvements and security enhancements.
- Battery Replacement: For battery-powered sensors (e.g., SI-101, SI-102), replace batteries promptly when the app indicates low battery levels. Refer to individual device manuals for battery types.
- Network Stability: Ensure your home Wi-Fi network is stable and strong to maintain reliable communication with the gateway and Wi-Fi camera.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not pairing. | Device too far from gateway; device not in pairing mode; interference. | Move device closer to gateway; ensure device is in pairing mode; check for other wireless interference. |
| Camera feed is blurry or dark. | Insufficient lighting; lens obstruction; network bandwidth issues. | Ensure adequate lighting; clean camera lens; check network speed and stability. |
| Smart Plug not responding. | No power; out of Z-Wave range; device malfunction. | Check power outlet; ensure it's within Z-Wave range of gateway or another repeater; try re-pairing. |
| App shows "Offline" for gateway. | Internet connection lost; gateway power off; network configuration issue. | Check internet connection; verify gateway is powered on; restart router and gateway. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | 2724720176903 |
| Brand | Airlive |
| Connectivity Technology | Wireless (Z-Wave Plus, Wi-Fi) |
| Product Dimensions | 16 x 16.8 x 16.6 cm (Kit packaging) |
| Weight | 1.27 kg (Kit packaging) |
| Recommended Use | Home Automation, Security, Night Vision |
| Indoor/Outdoor Use | Indoor (Camera can be used for outdoor monitoring if protected from elements) |
| Z-Wave Network | Source-routed mesh network architecture, long distance, higher coverage. |
| Repeater Functionality | Mains-powered Z-Wave Plus devices (e.g., Smart Plug) act as repeaters. |
| Google Home Support | Yes |
8. Warranty and Support
8.1. Warranty Information
The Airlive SK-104-ETSI-UK Smart Home Kit comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including warranty period and coverage details.
Extended warranty options may be available from authorized resellers. For example, 1-Year and 2-Year Extended Warranties by Salama Care are mentioned as available options.
8.2. Technical Support
For technical assistance, troubleshooting, or inquiries regarding your Airlive Smart Home Kit, please contact Airlive customer support through their official website or the contact information provided in your product documentation.
Ensure you have your product model number (2724720176903) and purchase details ready when contacting support.
