Introduction
This instruction manual provides comprehensive information for the installation, operation, and maintenance of your Schellenberg RolloDrive 65 Standard Electric Belt Winder. This device is designed to automate the opening and closing of roller shutters, offering convenience and enhanced control for your home.
Product Overview
Image: The Schellenberg RolloDrive 65 Standard Electric Belt Winder, a white rectangular device with control buttons and a belt extending from the top. This image shows the main unit of the electric belt winder, ready for installation.
Safety Instructions
Please read these safety instructions carefully before installation and operation to ensure safe use and prevent damage to the device or property.
- Electrical Safety: Always disconnect the main power supply to the roller shutter system before performing any installation, maintenance, or repair work. Only qualified electricians should perform electrical connections.
- Installation: Ensure the device is securely mounted according to the installation guidelines. Improper installation can lead to malfunction or injury.
- Children and Pets: Keep children and pets away from the operating device and moving roller shutters. Do not allow them to play with the controls.
- Environment: Do not expose the device to extreme temperatures, direct moisture, or corrosive substances. Use only indoors in dry conditions.
- Obstacles: Ensure the path of the roller shutter is clear of any obstacles during operation to prevent damage to the shutter or the drive mechanism.
Package Contents
Before beginning installation, please verify that all the following components are present in your package:
- 1x Schellenberg RolloDrive 65 Standard Electric Belt Winder (Article No. 22765)
- 1x Sun Sensor (Article No. 02266)
- Mounting Screws and Fasteners
- Instruction Manual (this document)
Image: The retail packaging for the Schellenberg RolloDrive 65 Standard Electric Belt Winder, clearly displaying the product and its key specifications like "System Maxi" for 23mm belt width and maximum area/weight capacity. This image shows the main product box.
Image: The Schellenberg RolloDrive 65 Standard Electric Belt Winder shown alongside its separate sun sensor, both in their respective packaging. This image illustrates the complete product set, emphasizing the inclusion of the sun sensor for advanced functionality.
Setup and Installation
The Schellenberg RolloDrive 65 Standard is designed for easy flush-mounted installation, fitting into many common wall boxes. It is an ideal solution for replacing existing manual belt winders, especially for tenants.
Pre-installation Checklist:
- Ensure the power supply to the roller shutter system is completely disconnected at the main breaker.
- Verify that your roller shutter belt has a width of 23 mm (System MAXI).
- Confirm the existing wall box's hole spacing for mounting is either 165 mm or 185 mm.
- Gather necessary tools: screwdriver, wire stripper, voltage tester.
Installation Steps:
- Remove Old Winder: Carefully remove the existing manual belt winder from the wall box.
- Prepare Belt: Detach the roller shutter belt from the old winder and carefully feed it into the new RolloDrive 65. Ensure the belt is not twisted.
- Mount Device: Position the RolloDrive 65 into the wall box, aligning the mounting holes. Secure the device using the provided screws.
- Electrical Connection: Connect the power supply wires to the designated terminals on the RolloDrive 65. Follow the wiring diagram in the detailed manual. If you are unsure about electrical work, consult a qualified electrician.
- Sun Sensor Connection: If using, connect the sun sensor (02266) cable to the dedicated port on the RolloDrive 65. Position the sensor in an area that receives direct sunlight when the shutter is open.
- Restore Power: Once all connections are secure and the device is mounted, restore power at the main breaker.
- Initial Test: Perform an initial test by manually operating the roller shutter up and down to ensure proper function and belt winding.
Operating Instructions
The RolloDrive 65 Standard offers various operating modes, including manual control, time automation, and intelligent functions with the sun sensor.
Manual Operation:
- Press the UP button (usually indicated by an upward arrow or sun icon) to raise the roller shutter.
- Press the DOWN button (usually indicated by a downward arrow or moon icon) to lower the roller shutter.
- Press any button during movement to stop the roller shutter at its current position.
Time Automation:
The device features a programmable timer for automatic opening and closing at set times. Refer to the detailed programming instructions in the full user manual for setting specific daily or weekly schedules.
- Setting Times: Use the programming buttons (often indicated by a clock icon) to enter the programming mode and set desired opening and closing times.
- Activating Timer: Ensure the timer function is activated after programming.
Sun and Twilight Function (with Sun Sensor):
With the included sun sensor, the RolloDrive 65 Standard can automatically react to changes in light levels, providing sun protection and privacy.
- Sun Function: When activated, the roller shutter will automatically lower when the sun sensor detects a set level of brightness, protecting your interior from excessive heat and glare.
- Twilight Function: The shutter can be programmed to close automatically at dusk, based on the light levels detected by the sensor.
- Sensitivity Adjustment: The sensitivity of the sun sensor can be adjusted to suit your preferences and local light conditions. Consult the detailed manual for adjustment procedures.
Automatic Obstacle Detection:
The RolloDrive 65 Standard is equipped with an automatic obstacle detection feature. If the roller shutter encounters an obstruction during its movement (either up or down), it will stop immediately to prevent damage to the shutter, the drive, or the obstacle itself.
Maintenance
The Schellenberg RolloDrive 65 Standard is designed for long-term, low-maintenance operation. Adhering to these simple guidelines will help ensure its longevity.
- Cleaning: Clean the surface of the device with a soft, slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage the plastic housing.
- Belt Inspection: Periodically inspect the roller shutter belt for any signs of wear, fraying, or damage. A worn belt can affect the performance of the winder. Replace the belt if necessary.
- No User Serviceable Parts: The RolloDrive 65 Standard contains no user-serviceable parts. Do not attempt to open the housing or perform any internal repairs. This will void the warranty and may lead to electrical hazards. For repairs, contact qualified service personnel.
- Environmental Conditions: Ensure the device remains in a dry environment and is not exposed to direct water spray or extreme humidity.
Troubleshooting
If you encounter issues with your RolloDrive 65 Standard, refer to the table below for common problems and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not respond to button presses. | No power supply or loose connection. | Check the power connection and ensure the circuit breaker is on. Verify wiring. |
| Roller shutter stops unexpectedly during movement. | Obstacle detected or end position not correctly set. | Remove any physical obstacles in the shutter's path. Re-program the end positions if necessary (refer to full manual). |
| Sun sensor function is not working. | Sensor not properly connected, or sun function not activated/programmed. | Ensure the sun sensor cable is securely plugged in. Activate the sun function in the device's settings. Check sensor placement for adequate light exposure. |
| Device is unusually loud during operation. | Normal operating noise, or friction from the belt/shutter. | Some motor noise is normal. Ensure the roller shutter belt runs freely and is not rubbing against anything. Lubricate roller shutter guides if needed. |
| Roller shutter does not fully open or close. | End positions need re-calibration. | Follow the instructions in the detailed manual to re-calibrate the upper and lower end positions of the roller shutter. |
If the problem persists after attempting these solutions, please contact Schellenberg customer support or a qualified technician.
Specifications
- Model: Schellenberg RolloDrive 65 Standard
- Article Number: 22765
- Max. Roller Shutter Area (Plastic): Up to 6.0 m²
- Max. Pulling Force: 45 kg
- Compatible Belt Width: 23 mm (System MAXI)
- Mounting Hole Spacing: 165 mm or 185 mm
- Material: High-quality Plastic
- Included Accessories: Sun Sensor 02266
- Power Supply: Standard household electrical connection (specific voltage/frequency as per local standards, refer to device label)
Warranty and Support
Schellenberg products are manufactured with stringent quality controls and are designed for reliability. Your RolloDrive 65 Standard comes with a manufacturer's warranty covering defects in materials and workmanship under normal use.
For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Schellenberg website. Keep your proof of purchase for any warranty claims.
Technical Support: If you require technical assistance, have questions about operation, or need to report a defect, please contact your authorized Schellenberg retailer or the Schellenberg customer service department directly.
Online Resources: For additional product information, FAQs, and support, please visit the Schellenberg Amazon Store or the official Schellenberg website.
