RYOBI 40-Volt Cordless Jet Fan Leaf Blower RY40460 User Manual

Important Safety Instructions

Read and understand all instructions before using this product. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.

• Always wear eye protection with side shields marked to comply with ANSI Z87.1.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Keep children and bystanders away while operating a power tool.
• Use the right tool for your application. Do not force the tool.
• Disconnect the battery pack from the tool before making any adjustments, changing accessories, or storing the tool.
• Store idle tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.

Product Overview

The RYOBI 40-Volt Cordless Jet Fan Leaf Blower (Model RY40460) is designed for efficient clearing of leaves and debris from various surfaces. It features a powerful jet fan design and variable speed control for optimized performance.

Image: RYOBI 40-Volt Cordless Jet Fan Leaf Blower, showing the main unit with the battery attached.

Setup

1. Unpacking: Carefully remove all components from the packaging. Ensure all parts listed in the packing list are present.
2. Attaching the Blower Tube:
   • Align the blower tube with the blower housing.
   • Push the tube onto the housing until it clicks into place. Ensure it is securely fastened.
   

   Image: The RYOBI leaf blower with its tube securely attached to the main unit.
3. Installing the Battery Pack:
   • Ensure the battery pack is fully charged before first use. (Note: Battery and charger are not included with this bare tool model).
   • Slide the battery pack into the base of the blower handle until it latches securely.
   • To remove, press the release button on the battery pack and slide it out.

Operating Instructions

1. Starting the Blower:
   • Ensure the battery is fully inserted.
   • Press and hold the trigger switch to start the blower.
2. Variable Speed Control:
   • The blower features variable speed control. Adjust the trigger pressure to increase or decrease airflow.
   • For maximum power, engage the turbo button. This provides a burst of high-speed air for stubborn debris.

   Video: Demonstration of the RYOBI 40-Volt Leaf Blower in operation, showcasing its variable speed and turbo function.

3. Operating Tips:
   • Hold the blower firmly with one hand, directing the nozzle towards the debris.
   • Sweep from side to side, moving debris into piles.
   • Avoid blowing debris towards people or animals.
4. Stopping the Blower:
   • Release the trigger switch to turn off the blower.

Maintenance

Regular maintenance ensures optimal performance and extends the life of your leaf blower.

1. Cleaning:
   • After each use, disconnect the battery pack.
   • Wipe the exterior of the blower with a clean, damp cloth.
   • Remove any debris from the air intake vents and blower tube.
2. Storage:
   • Store the blower in a dry, well-ventilated area, away from direct sunlight and extreme temperatures.
   • Remove the battery pack before storing for extended periods.
3. Battery Care:
   • Always use the RYOBI 40-Volt Lithium-Ion battery and compatible charger.
   • Do not store battery packs in areas where temperatures may exceed 120°F (49°C).

Troubleshooting

Specifications

• Model: RY40460
• Brand: RYOBI
• Power Source: 40-Volt Lithium-Ion Battery (not included)
• Air Speed: Up to 110 MPH
• Air Volume: Up to 500 CFM
• Special Features: Variable Speed, Jet Fan Technology
• Noise Level: 71 Decibels

Warranty and Support

For warranty information or technical support, please refer to the official RYOBI website or contact their customer service. Keep your purchase receipt as proof of purchase for warranty claims.

Online Support: Visit www.ryobitools.com

Customer Service: Refer to your product packaging or the official website for current contact information.