1. Introduction
Thank you for choosing the Feandrea Dog Cage. This manual provides essential information for the safe assembly, operation, and maintenance of your new dog crate. Please read these instructions carefully before use and retain them for future reference.

Image: A man gently interacts with a large dog inside the Feandrea dog cage, demonstrating its spaciousness and visibility.

Image: A Golden Retriever comfortably seated inside the Feandrea foldable dog crate, highlighting its use as a safe haven.
2. Safety Instructions
To ensure the safety of your pet and household, please observe the following guidelines:
- Do not stand or sit on the crate. Do not place any objects on top of the cage.
- Children should not climb into the cage or play inside it.
- Always remove your pet's collar or leash before it enters the crate to prevent entanglement.
- Although made from robust metal wire, the crate can deform from repeated external forces like biting or pawing. Gradually accustom your dog to the crate so they feel secure and do not attempt to escape violently.
- During initial use, or if your dog is very active, do not keep them in the crate for extended periods. It is recommended to leave the door open for the first few days to help them adapt.
3. Package Contents
Please check the package to ensure all components are present and undamaged:
- 1 x Feandrea Dog Cage (Main Unit)
- 1 x Removable Plastic Tray
- 1 x Divider Panel
- 1 x Instruction Manual (this document)
4. Setup and Assembly
The Feandrea Dog Cage is designed for quick and tool-free assembly. Follow these steps:
- Unfold the Base: Lay the folded crate flat on the floor with the plastic tray removed.
- Raise the Sides: Lift the side panels upwards.
- Secure the Panels: Connect the side panels to the top panel using the integrated metal clamps/hooks. Ensure all connections are secure.
- Insert the Tray: Slide the removable plastic tray into the bottom of the assembled cage.
- Install Divider (Optional): If using, position the divider panel as needed and secure it to the crate wires.

Image: Visual guide showing the four simple steps to assemble the dog cage: 1. Folded panel with hooks, 2. Unfolding the base, 3. Raising and connecting sides, 4. Fully assembled cage.
5. Operating Instructions
5.1. Door Operation
The cage features two lockable doors for flexible placement and easy access. To open, slide the latch upwards and pull the door open. To close, push the door shut and slide the latch downwards until it clicks securely into place.
5.2. Using the Divider Panel
The adjustable and removable divider panel allows you to customize the living space for your pet. This is particularly useful for puppies, allowing you to increase their space as they grow. Simply position the divider at the desired location and secure it to the cage wires.

Image: The dog cage shown with an adjustable divider panel, illustrating how it can be used to accommodate a dog from puppyhood to adulthood.
5.3. Choosing the Right Size
Ensure the crate is appropriately sized for your dog to provide comfort and safety. Your dog should be able to stand up, turn around, and lie down comfortably inside. Refer to the sizing guide below:

Image: A visual guide displaying different crate sizes (L, XL, XXL) with corresponding dog weight ranges and dimensions. Includes instructions on how to measure your pet for a crate.
How to Measure Your Pet for a Crate:
- Length: While standing, measure from the tip of its nose to the base of its tail.
- Height: While sitting, measure from the head to the floor.
- Add 10 cm to both final measurements for extra wiggle room.
6. Maintenance and Cleaning
Regular cleaning will help maintain hygiene and extend the life of your dog cage.
- Plastic Tray: The removable plastic tray can be easily slid out for cleaning. Wash with mild soap and water, then rinse thoroughly and dry before returning it to the cage.
- Metal Wire: Wipe down the metal wire frame with a damp cloth and a mild, pet-safe disinfectant. Dry immediately to prevent rust.
- Floor Protectors: The cage is equipped with plastic floor protectors. Periodically check these for wear and ensure they are clean to protect your flooring.

Image: A close-up view of the plastic floor protectors attached to the bottom of the dog cage, designed to prevent scratches on flooring.
7. Troubleshooting
If you encounter any issues with your Feandrea Dog Cage, consider the following:
- Difficulty Assembling: Ensure all panels are correctly aligned and the metal clamps are fully engaged. Refer to the assembly steps in Section 4.
- Doors Not Latching Securely: Check for any obstructions in the latch mechanism. Ensure the door is fully closed before attempting to latch.
- Crate Instability: Verify that all connections are secure and the cage is placed on a flat, stable surface.
- Pet Resistance to Crate: Gradually introduce your pet to the crate. Use positive reinforcement, treats, and familiar bedding. Never use the crate as punishment.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Feandrea |
| Model Name | PPD48BK |
| Product Dimensions (L x W x H) | 122 x 74.5 x 80.5 cm |
| Material | Alloy Steel, Plastic |
| Colour | Black |
| Number of Doors | 2 |
| Gap Size | 2 cm |
| Special Features | Collapsible, Removable Divider, Stable, Floor Protectors |
| Product Weight | 17.3 kg |

Image: A technical diagram illustrating the precise external and internal dimensions of the Feandrea dog cage.
9. Warranty and Support
For warranty information or customer support, please refer to the retailer's return policy or contact Feandrea customer service through their official website or the platform where the product was purchased. Please have your model number (PPD48BK) and purchase details ready.
Visit the Feandrea Store for more information and products.