1. Introduction
This manual provides essential information for the safe and effective use of your Philips BRE225/05 Satinelle Essential Compact Epilator. Please read these instructions carefully before using the appliance and retain them for future reference.
The Philips Satinelle Essential Compact Epilator is designed for efficient hair removal from the legs, providing smooth skin for weeks. Its compact design and corded operation ensure consistent performance.
2. Important Safety Information
Warning: To reduce the risk of burns, electrocution, fire, or injury to persons:
- Ensure the appliance is dry before connecting it to power. This appliance is not water resistant.
- Do not use the appliance near water, such as in a bathtub, shower, or over a filled basin.
- Always unplug the appliance immediately after use and before cleaning.
- Keep the appliance away from heated surfaces.
- Do not use the appliance if it is damaged or if the cord is damaged. Contact Philips customer service for repair.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- For hygienic reasons, the appliance should only be used by one person.
3. Product Overview
Familiarize yourself with the components of your Philips Satinelle Essential Compact Epilator.
Figure 1: Close-up of the epilator head, showing the rotating tweezer discs designed to capture and remove hair from the root.
Figure 2: The power switch, located on the body of the epilator, allows selection between two speed settings (I and II) and the off position (O).
Figure 3: Side profile of the epilator, highlighting its ergonomic design for comfortable handling during use.
4. Setup
- Unpack: Carefully remove the epilator and all accessories from the packaging.
- Inspect: Check the appliance and the power cord for any visible damage. Do not use if damaged.
- Connect Power: Insert the small plug of the power cord into the socket on the epilator. Then, plug the adapter into a wall outlet. Ensure the voltage specified on the adapter matches your local mains voltage.
Figure 4: The Philips Satinelle Essential Compact Epilator with its power cord connected, ready for use.
5. Operating Instructions
5.1 Preparing Your Skin
- For best results, ensure your skin is clean and dry before epilating.
- Exfoliate your skin a day before epilating to prevent ingrown hairs.
- The ideal hair length for epilation is between 0.5 mm and 4 mm.
5.2 Using the Epilator
- Turn on the epilator by sliding the power switch to the desired speed setting:
- Speed I: For sensitive areas and finer hair.
- Speed II: For more effective epilation on larger areas and thicker hair.
- Hold the epilator at a 90-degree angle to your skin, ensuring the Philips logo faces the direction of movement.
- Stretch your skin taut with your free hand.
- Move the epilator slowly against the direction of hair growth. Apply light pressure.
- Avoid pressing too hard, as this can cause irritation or reduce efficiency.
- After epilation, you may apply a soothing lotion to your skin.
Figure 5: The epilator positioned for use, demonstrating its compact size and ease of handling.
6. Maintenance and Cleaning
Regular cleaning ensures optimal performance and hygiene of your epilator.
- Switch Off and Unplug: Always turn off the appliance and unplug it from the mains before cleaning.
- Remove Epilator Head: Gently press the release button (if present, or follow specific model instructions) and remove the epilator head from the body.
- Clean Epilator Head: Use the small cleaning brush (if included) to brush away any trapped hairs from the epilator discs.
- Washable Nozzle: The epilator head (nozzle) is washable. Rinse it under running tap water. Ensure it is completely dry before reattaching it to the epilator body. Do not immerse the main body of the epilator in water.
- Clean Body: Wipe the main body of the epilator with a damp cloth. Do not use abrasive cleaning agents or harsh chemicals.
- Storage: Store the epilator in a dry, safe place, away from direct sunlight and out of reach of children.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Epilator does not turn on. | Not properly plugged in, or power outlet issue. | Check if the power cord is securely plugged into both the epilator and the wall outlet. Test the outlet with another appliance. |
| Poor hair removal results. | Incorrect technique, hair too short/long, or epilator head is dirty. | Ensure you are holding the epilator at a 90-degree angle and moving it against hair growth. Check hair length (0.5mm-4mm is ideal). Clean the epilator head thoroughly. |
| Skin irritation after epilation. | Skin not prepared, pressing too hard, or sensitive skin. | Ensure skin is clean and dry. Apply light pressure. Use speed I for sensitive areas. Apply a soothing lotion post-epilation. |
8. Specifications
- Model: BRE225/05
- Brand: PHILIPS
- Power Source: Corded Electric
- Color: White/Purple
- Dimensions (LxWxH): 10 x 10 x 10 Centimeters
- Item Weight: 216 g (0.22 Kilograms)
- Water Resistance Level: Not Water Resistant
- Included Components: Epilator, Power Cord, Instruction of Use
- Manufacturer: Türk Philips Tic. A.Ş.
9. Warranty and Support
This Philips appliance comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including the warranty period.
For product support, frequently asked questions, or to locate an authorized service center, please visit the official Philips website or contact Philips customer service in your region. Keep your proof of purchase for warranty claims.
Online Support: www.philips.com/support