1. Introduction
Welcome to the user manual for your Creative Pebble Plus 2.1 USB-Powered Desktop Speakers. This system is designed to provide enhanced audio for your computer PCs and laptops, featuring a powerful down-firing subwoofer and far-field drivers for immersive sound.
Please read this manual carefully before using your speaker system to ensure proper setup, operation, and maintenance.
Image: The Creative Pebble Plus 2.1 speaker system positioned on a desk alongside a laptop, demonstrating its compact and aesthetic integration into a desktop environment.
2. Package Contents
- Creative Pebble Plus Satellite Speakers (2 units)
- Creative Pebble Plus Subwoofer (1 unit)
- USB Power Cable (integrated)
- 3.5mm AUX-in Cable (integrated)
Image: The Creative Pebble Plus 2.1 speaker system, showcasing the two compact satellite speakers and the larger, cubic subwoofer, as they appear out of the box.
3. Key Features
The Creative Pebble Plus 2.1 system incorporates several design and technological features for an enhanced audio experience:
- Powerful Down-Firing Subwoofer: Features a newly designed standalone 4-inch down-firing ported subwoofer for remarkable power and depth in bass frequencies.
- 45° Elevated Drivers: The 2-inch mid-range drivers in the satellite speakers are specifically angled at 45° towards the listener, optimizing the soundstage for a direct and immersive audio experience.
- High Gain Mode: A selectable mode that increases the power output to 8W RMS, providing stronger bass and room-filling audio when used with a 5V 2A USB adapter.
- Easy Access Volume Controls: The volume knob is conveniently located on the front of one of the satellite speakers for quick adjustments.
- USB-Powered Convenience: The entire system is powered via a single USB connection, eliminating the need for a wall socket.
Image: A close-up view of the Creative Pebble Plus satellite speakers, highlighting their unique 45-degree elevated driver design, which directs sound upwards towards the listener.
4. Setup and Connections
Follow these steps to set up your Creative Pebble Plus 2.1 speaker system:
- Positioning the Speakers: Place the two satellite speakers on your desktop, ideally equidistant from your listening position. The 45° elevated drivers are designed to direct sound towards you.
- Positioning the Subwoofer: Place the subwoofer on the floor or desktop, ensuring the down-firing driver has clear space beneath it for optimal bass performance.
- Connect Satellite Speakers to Subwoofer: Connect the RCA cables from the satellite speakers to the corresponding RCA input ports on the back of the subwoofer.
- Connect to Audio Source: Plug the 3.5mm AUX-in cable from the speaker system into the headphone jack or audio output port of your computer, laptop, or other audio device.
- Power Connection: Plug the USB power cable into an available USB port on your computer or a 5V 2A USB power adapter (not included). The system is entirely USB-powered.
Image: A detailed diagram illustrating the connection points for the Creative Pebble Plus 2.1 system, including the USB power, 3.5mm audio input, and RCA connections to the subwoofer.
Image: Rear view of the Creative Pebble Plus subwoofer, showing its dimensions (202mm x 150mm x 195mm) and the input ports for the satellite speakers.
5. Operating Instructions
5.1 Powering On/Off and Volume Control
The system powers on automatically when connected to a powered USB port. The volume control knob is conveniently located on the front of the right satellite speaker. Rotate clockwise to increase volume and counter-clockwise to decrease volume.
5.2 High Gain Mode
For increased power output and stronger bass performance, activate the High Gain Mode. This mode boosts the total RMS power output to 8W. To enable High Gain Mode, locate the switch on the bottom of the right satellite speaker and slide it to the 'H' position.
Image: A close-up view of the High Gain Mode switch located on the underside of one of the satellite speakers, showing 'L' (Low Gain) and 'H' (High Gain) settings.
Note: High Gain Mode requires a 5V 2A USB adapter (not included) for optimal performance. Using a lower amperage USB port may result in reduced output.
6. Maintenance
To ensure the longevity and optimal performance of your Creative Pebble Plus 2.1 speaker system, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to wipe down the speakers and subwoofer. Avoid using abrasive cleaners, solvents, or sprays directly on the units.
- Placement: Keep the speakers away from direct sunlight, heat sources, and excessive moisture. Ensure adequate ventilation around the subwoofer.
- Cable Management: Avoid kinking or sharply bending the integrated cables.
- Storage: If storing the system for an extended period, disconnect all cables and store in a cool, dry place.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound |
|
|
| Distorted sound |
|
|
| Subwoofer not working |
|
|
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Creative |
| Speaker Maximum Output Power | 8 Watts (RMS) |
| Frequency Response | 20 KHz |
| Connectivity Technology | Wired (USB power, 3.5mm AUX-in, RCA for subwoofer) |
| Audio Output Mode | Stereo |
| Subwoofer Driver Size | 4 inches (down-firing) |
| Satellite Driver Size | 2 inches (mid-range, elevated at 45°) |
| Power Source | USB (5V 1A for standard, 5V 2A for High Gain Mode) |
| Subwoofer Dimensions (H x W x D) | 202mm x 150mm x 195mm (8 x 5.9 x 7.7 inches) |
9. Warranty and Support
For warranty information and technical support, please refer to the official Creative website or contact Creative customer service directly. Keep your proof of purchase for warranty claims.
Online Support: https://us.creative.com/support/
Product Registration: Registering your product may provide additional benefits and support. Visit the Creative website for details.
