Optimus H-8214 Infrared Quartz Heater User Manual
Model: H-8214
Important Safety Instructions
Please read all instructions carefully before using this heater. Failure to follow these instructions may result in fire, electric shock, or injury.
- Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
- This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
- Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
- Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
- Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner.
- Do not use outdoors.
- To disconnect heater, turn controls to OFF, then remove plug from outlet.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- This heater has an overheat thermal cut-off protection feature. If the heater overheats, it will automatically shut off. To reset, unplug the heater from the electrical outlet, wait 10 minutes for the unit to cool, then plug it back in.
- The heater is equipped with a 3-prong grounded plug for your safety. Do not defeat the purpose of the grounding plug.
Product Overview
The Optimus H-8214 is an infrared quartz heater designed for efficient heating of small to medium rooms. It features a digital display, electronic thermostat, and remote control for convenient operation.
Image: Optimus H-8214 Infrared Quartz Heater with its remote control. The heater is black with a white control panel and a visible heating element.
Key Features:
- Heat Settings: 750W, 1500W, and ECO 500W modes.
- Heating Elements: Four infrared quartz tubes for heat exchange.
- Controls: Front panel push-button controls and a remote control.
- Thermostat: Digital electronic thermostat, switchable between Fahrenheit (59°F to 86°F) and Celsius.
- Timer: Programmable 1 to 12-hour timer control.
- Safety: Overheat thermal cut-off protection.
- Mobility: Large wheel base for easy movement.
- Air Filtration: Includes an air filter.
Setup
- Unpacking: Carefully remove the heater from its packaging. Retain packaging for future storage if needed.
- Placement: Place the heater on a firm, level surface. Ensure it is at least 3 feet (0.9 m) away from walls, furniture, and other combustible materials. Do not place it on soft surfaces like rugs or carpets that might block the air intake.
- Power Connection: Plug the heater's 3-prong grounded plug directly into a 120V AC, 60Hz wall outlet. Do not use extension cords or power strips.
- Remote Control Battery: The remote control requires 1 CR2 battery (included). Ensure it is correctly installed.
Operating Instructions
Control Panel and Remote Control
The heater can be operated using the push-button controls on the front panel or the included remote control. The functions are identical.
Image: Close-up of the heater's control panel, highlighting the digital temperature display and the °F/°C button for switching units.
Image: The remote control for the Optimus H-8214 heater, showing buttons for power, mode, temperature adjustment, and timer.
- Power On/Off: Press the POWER button (usually labeled 'Mode' or a power symbol) on the control panel or remote to turn the heater on or off. The digital display will illuminate.
- Adjusting Heat Settings (Mode):
Press the MODE button repeatedly to cycle through the heat settings:
- High (1500W): For maximum heat output.
- Low (750W): For moderate heat output.
- ECO (500W): Energy-saving mode, maintains a comfortable temperature with lower power consumption.
Image: Close-up of the control panel indicating the different heat settings: High, Low, and ECO.
- Setting the Thermostat:
Use the TEMPERATURE UP (▲) and TEMPERATURE DOWN (▼) buttons on the control panel or remote to set your desired temperature. The temperature range is 59°F to 86°F (15°C to 30°C). The heater will cycle on and off to maintain the set temperature. - Switching Temperature Units (°F/°C):
Press the °F/°C button on the control panel or remote to switch the display between Fahrenheit and Celsius. - Using the Timer:
Press the TIMER button. The display will show '00'. Use the UP (▲) and DOWN (▼) buttons to set the desired operating time from 1 to 12 hours. The heater will automatically turn off after the set time expires.
To cancel the timer, set it to '00' or turn the heater off.
Image: Close-up of the control panel showing the timer function, with examples of 1 hour and 12 hours displayed.
Maintenance
Regular maintenance ensures optimal performance and longevity of your heater.
- Cleaning the Air Filter:
The heater includes an air filter to prevent dust buildup.
- Unplug the heater and allow it to cool completely.
- Locate the air filter cover (usually on the back or side).
- Remove the filter and gently clean it with a vacuum cleaner or rinse it with warm water. Ensure the filter is completely dry before reinstalling.
- Reinsert the filter and close the cover.
- General Cleaning:
- Always unplug the heater before cleaning.
- Use a soft, damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents.
- Do not immerse the heater in water or allow water to drip into the interior.
- Storage:
When not in use, store the heater in a cool, dry place. It is recommended to store it in its original packaging to protect it from dust and damage.
Troubleshooting
If your heater is not operating correctly, please check the following before contacting support:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power to the unit. Overheat protection activated. Power button not pressed. | Ensure the heater is securely plugged into a working 3-prong outlet. Unplug, wait 10 minutes for cooling, then plug back in. Press the POWER button on the unit or remote. |
| Heater turns off unexpectedly. | Overheat protection activated. Timer function engaged. | Unplug, wait 10 minutes for cooling, then plug back in. Ensure air intakes/outlets are not blocked. Check if the timer is set. If so, reset or cancel the timer. |
| Heater is on but not producing heat. | Thermostat set too low. ECO mode engaged. | Increase the set temperature using the UP button. Switch to High or Low heat mode if more rapid heating is desired. |
| Remote control not working. | Battery depleted or incorrectly installed. Obstruction between remote and heater. | Replace the CR2 battery, ensuring correct polarity. Ensure a clear line of sight between the remote and the heater's sensor. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | H-8214 |
| Brand | Optimus |
| Type | Infrared Quartz Heater |
| Heat Settings | ECO (500W), Low (750W), High (1500W) |
| Thermostat Range | 59°F to 86°F (15°C to 30°C) |
| Timer Control | 1 - 12 Hours |
| Power Supply | 120V AC, 60Hz |
| Product Dimensions (D x W x H) | 17.5" x 13.4" x 16.7" |
| Item Weight | 16.3 pounds |
| Color | Black |
| Special Features | Digital Display, Electronic Thermostat, Overheat Protection, Programmable Thermostat, Remote Control, Air Filter, Large Wheel Base |
| Remote Battery | 1 CR2 battery (included) |
Warranty and Support
This Optimus H-8214 Infrared Quartz Heater comes with a 3-year manufacturer's warranty.
For technical support, warranty claims, or further inquiries, please visit the official Optimus website or contact their customer service department.
Official Product Information: Optimus Products
