User Manual: Small Trio Table Lamp with 5W LED, Grey Fabric Shade & Touch Dimmer Function

1. Introduction

Thank you for purchasing the Trio Table Lamp. This decorative lamp features a modern design with a matte nickel metal base and a grey fabric shade. It is equipped with a convenient 4-fold touch function, allowing for easy control of power and brightness levels. Designed for versatility, this lamp is an excellent addition to living rooms, bedrooms, or hallways, providing both ambient light and a stylish accent.

Figure 1: The Trio Table Lamp, showcasing its grey fabric shade and matte nickel base.

2. Safety Instructions

• Always disconnect the lamp from the power supply before cleaning or replacing the bulb.
• Do not expose the lamp to moisture or extreme temperatures. This lamp is designed for indoor use only.
• Ensure the power cord is not pinched or damaged. Do not place heavy objects on the cord.
• Use only bulbs with the specified fitting (E14) and wattage (max. 40W for dimmable lamps, 5W LED bulb included).
• Keep out of reach of children and pets.
• If the lamp or cord is damaged, do not attempt to repair it yourself. Contact qualified service personnel.

3. Package Contents

Please check the package for the following items:

• 1 x Trio Table Lamp (Matte Nickel Base with Grey Fabric Shade)
• 1 x Dimmable E14 LED Bulb (5W, 400 lumens, warm white)
• 1 x User Manual (this document)

4. Setup

1. Unpack the Lamp: Carefully remove all components from the packaging. Retain packaging for future transport or storage if needed.
2. Insert the Bulb: Screw the provided E14 LED bulb into the lamp's fitting. Ensure it is securely tightened but do not overtighten.
   

   Figure 2: Ensure the bulb is correctly inserted into the lamp fitting.
3. Position the Lamp: Place the lamp on a stable, flat surface. Ensure the power cord can reach a wall outlet without being stretched or obstructed.
   

   Figure 3: Proper placement of the lamp on a stable surface.

4. Connect to Power: Plug the lamp's power cord into a standard electrical outlet.

5. Operating Instructions

The Trio Table Lamp features a convenient 4-fold touch dimmer function integrated into its metal base.

1. Turning On/Off: Lightly touch any part of the metal base to turn the lamp on or off.
2. Adjusting Brightness: After turning the lamp on, continue to lightly touch the metal base to cycle through the three available brightness levels.
   • First touch: Low brightness
   • Second touch: Medium brightness
   • Third touch: High brightness
   • Fourth touch: Turns the lamp off

Figure 4: The touch function allows for easy control of light intensity.

6. Maintenance

• Cleaning the Base: To clean the matte nickel metal base, wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish.
• Cleaning the Shade: The grey fabric shade can be gently dusted with a soft brush or a lint roller. For minor spots, dab with a slightly damp cloth and allow to air dry completely.
• Bulb Replacement: Ensure the lamp is unplugged before replacing the bulb. Allow the old bulb to cool down before unscrewing it. Replace with an E14 LED bulb, maximum 40W if non-LED, or 5W LED for optimal performance and dimming compatibility.

7. Troubleshooting

8. Specifications

Figure 5: Dimensions of the Trio Table Lamp.

Figure 6: Technical diagram of the lamp, including cord length (L1500MM).

9. Warranty and Support

For warranty information or technical support, please refer to the retailer where you purchased the product or visit the official Trio Lighting website. Keep your proof of purchase for any warranty claims.

For further assistance, you may contact the manufacturer, Trio, directly.