Product Overview
The Vivitar PG-8000-MB Microdermabrasion/Facial Pore Cleanser is designed to assist in deep cleaning pores and improving skin texture. This device utilizes vacuum suction to help remove impurities from the skin's surface.
Key features include:
- Removes blackheads and whiteheads.
- Helps reduce the visibility of fine lines.
- Stimulates skin regeneration.
- Lightweight and portable design.
- Comes with 3 head attachments for various skin types and conditions.
Image 1: Vivitar PG-8000-MB Microdermabrasion/Facial Pore Cleanser in its packaging, highlighting its features and blue color.
Setup
- Unpack the Device: Carefully remove the Vivitar Pore Cleanser and all accessories from the packaging.
- Install Batteries: The device requires 2 AA batteries (included). Open the battery compartment, insert the batteries according to the polarity indicators, and close the compartment securely.
- Select Attachment: Choose the appropriate suction head attachment for your skin type and desired treatment area. The device typically includes various sizes and shapes for different purposes. Gently twist or click the chosen attachment onto the device head until it is secure.
- Prepare Skin: Ensure your skin is clean and dry before use. It is recommended to cleanse your face thoroughly to remove makeup and surface impurities.
Image 2: The Vivitar PG-8000-MB device shown with its various interchangeable suction head attachments.
Operating Instructions
Follow these steps for effective and safe use of your Vivitar Pore Cleanser:
- Power On: Press the power button to turn on the device.
- Test Suction: Before applying to your face, test the suction on your hand to familiarize yourself with the intensity.
- Apply to Skin: Gently move the device over your face, focusing on problem areas such as the nose, chin, and forehead. Ensure continuous movement; do not hold the device in one spot for more than 2-3 seconds to avoid bruising or skin irritation.
- Recommended Usage: Use the device on very lightly damp skin for optimal results and to minimize discomfort.
- Post-Treatment: After use, apply a soothing moisturizer to your skin.
- Power Off: Press the power button again to turn off the device.
Video 1: Official product video demonstrating the Vivitar Pore Cleanser in use, showing how it penetrates deep into the skin to remove blackheads, whiteheads, dirt, and oil, and helps reduce fine lines.
Maintenance
Regular cleaning and maintenance will ensure the longevity and effectiveness of your device.
- Clean Attachments: After each use, remove the suction head attachment and clean it thoroughly with warm, soapy water. Rinse well and allow it to air dry completely before reattaching or storing.
- Clean Device Body: Wipe the main body of the device with a soft, damp cloth. Do not submerge the device in water.
- Replace Filters: The device uses small foam filters to prevent debris from entering the motor. Check these filters regularly and replace them when they appear dirty or worn. (Note: Replacement filters may need to be purchased separately or obtained from the manufacturer).
- Storage: Store the device in a cool, dry place, away from direct sunlight and moisture.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Batteries are dead or incorrectly inserted. | Check battery polarity. Replace with new AA batteries. |
| Weak or no suction. |
|
|
| Skin redness or bruising after use. |
|
|
Specifications
- Model Number: PG-8000-MB
- Brand: Vivitar
- Power Source: 2 AA batteries (included)
- Product Dimensions: 4.8 x 2.7 x 9.1 inches
- Item Weight: 0.5 Pounds
- Color: Blue
- Manufacturer: Sakar International
- UPC: 681066965375
Warranty and Support
For warranty information or technical support, please contact Vivitar customer service. Refer to the product packaging or the official Vivitar website for the most current contact details.
Please retain your proof of purchase for any warranty claims.