Introduction
The Hyperkin Cadet Premium Wireless BT Controller is designed to provide a modern, ergonomic gaming experience while retaining the classic feel of the original NES controller. This manual provides instructions for setting up, operating, and maintaining your controller, ensuring optimal performance across compatible platforms.
Image: Retail packaging for the Hyperkin Cadet Premium BT Controller, showing the controller and wireless adapter.
Product Features
- Premium Build Quality: Constructed for durability and a comfortable, ergonomic retro design.
- Multi-Platform Compatibility: Works with all NES models, PC, Mac, and Android devices via Bluetooth.
- Wireless Connectivity: Operates wirelessly up to 30 feet using the included Bluetooth adapter for NES or direct Bluetooth for other platforms.
- Rechargeable Battery: Features a built-in lithium-ion battery, providing approximately 6 hours of gameplay on a full charge. Recharges via Micro USB.
- Included Accessories: Comes with a Micro USB charging cable and a wireless adapter for NES consoles.
Image: Rear view of the Hyperkin Cadet Premium BT Controller, highlighting its ergonomic design and model number.
Package Contents
- Hyperkin Cadet Premium BT Controller
- Wireless Adapter (for NES)
- Micro USB Charging Cable
Setup
Initial Charging
- Connect the Micro USB charging cable to the controller's charging port.
- Connect the other end of the cable to a USB power source (e.g., computer USB port, USB wall adapter).
- The LED indicator on the controller will illuminate during charging and turn off when fully charged. A full charge takes approximately 2-3 hours.
Connecting to NES Console
- Ensure your NES console is powered off.
- Insert the included wireless adapter into a controller port on your NES console. Ensure it is firmly seated.
- Power on your NES console.
- Press and hold the small pairing button on the wireless adapter until its LED indicator begins to flash rapidly.
- On the Cadet controller, press and hold the Start button until the controller's LED indicator begins to flash rapidly.
- Once both LEDs are solid, the controller is paired and ready for use.
Image: The Hyperkin Cadet Premium BT Controller shown alongside its wireless adapter, ready for connection.
Connecting to PC, Mac, or Android
- Ensure Bluetooth is enabled on your PC, Mac, or Android device.
- On the Cadet controller, press and hold the Start button until the controller's LED indicator begins to flash rapidly. This puts the controller into pairing mode.
- On your device, search for new Bluetooth devices. The controller should appear as "Hyperkin Cadet" or similar.
- Select the controller to pair. The controller's LED will become solid once successfully paired.
Operating Instructions
Power On/Off
- To Power On: Press the Start button. The LED indicator will flash and then become solid if it connects to a previously paired device.
- To Power Off: Press and hold the Start button for 3 seconds. The LED indicator will turn off. The controller will also automatically power off after a period of inactivity to conserve battery.
Button Layout
The Cadet controller features the classic NES button layout:
- D-Pad: Directional control.
- Select Button: Typically used for game options or player selection.
- Start Button: Used to pause games or begin gameplay.
- B Button: Primary action button.
- A Button: Secondary action button.
Image: Side view of the Hyperkin Cadet Premium BT Controller, showing the Micro USB port and overall profile.
Charging the Controller
The controller is equipped with a rechargeable lithium-ion battery. When the battery is low, the LED indicator may flash slowly or turn off during use. Connect the controller to a USB power source using the provided Micro USB cable to recharge. A full charge provides approximately 6 hours of gameplay.
Maintenance
- Keep the controller and adapter clean by wiping with a soft, dry cloth.
- Avoid exposing the device to extreme temperatures, moisture, or direct sunlight.
- Do not attempt to disassemble the controller or adapter, as this will void the warranty and may cause damage.
- Store the controller in a safe place when not in use to prevent physical damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Controller does not power on. | Battery is depleted. | Charge the controller using the Micro USB cable. |
| Controller does not pair with NES. | Adapter not fully inserted or pairing mode not activated. | Ensure the wireless adapter is firmly seated in the NES controller port. Re-enter pairing mode for both the adapter and controller. Some original NES consoles may have worn ports requiring a very firm connection or an extension cable. |
| Controller does not pair with PC/Mac/Android. | Bluetooth not enabled or controller not in pairing mode. | Ensure Bluetooth is active on your device. Press and hold the Start button on the controller until its LED flashes rapidly to enter pairing mode. |
| Connection is unstable or disconnects frequently. | Out of range, interference, or low battery. | Move closer to the console/device (within 30 ft). Ensure no major obstructions. Recharge the controller. |
| Buttons are unresponsive. | Connection issue or controller malfunction. | Re-pair the controller. If the issue persists, contact Hyperkin support. |
Specifications
- Model Number: M07325
- Connectivity: Bluetooth (Wireless)
- Wireless Range: Up to 30 ft (9.1 meters)
- Battery: Built-in Lithium-Ion (included)
- Battery Life: Approximately 6 hours per charge
- Charging Port: Micro USB
- Compatibility: NES, PC, Mac, Android
- Item Weight: 7 ounces (approx. 198 grams)
- Package Dimensions: 7.01 x 4.96 x 2.28 inches (approx. 17.8 x 12.6 x 5.8 cm)
- Manufacturer: Hyperkin
Warranty and Support
For warranty information or technical support, please visit the official Hyperkin website or contact their customer service department. Keep your proof of purchase for any warranty claims.
Official Product Videos
No official product videos from the seller were available for embedding based on the provided data.
