NutriBullet Replacement Cups User Manual

1. Product Overview

This manual provides essential information for the proper use and maintenance of your NutriBullet 18oz replacement cups. These cups are designed to seamlessly integrate with specific NutriBullet blender models, offering a convenient and durable solution for your blending needs. Each cup features a comfort handle and a screw-off lip ring for enhanced usability.

Image 1.1: Two 18oz replacement cups with comfort handles and accompanying lip rings.

2. Package Contents

Upon opening your package, please verify that all components are present and in good condition. The standard package includes:

• Two (2) 18 Ounce Short Cups with Comfort Handles
• Two (2) Screw-off Comfort Lip Rings

Image 2.1: A single 18oz replacement cup with its integrated comfort handle.

Image 2.2: A close-up of the screw-off comfort lip ring.

3. Compatibility

These replacement cups are specifically designed for compatibility with certain NutriBullet blender models. Please ensure your blender model is listed below for proper fit and function.

Compatible Models:

• 600W Series: NB-101 600W, NB-101S 600W, NB-101B 600W MAX, NBR-1201 600W, NBR-0601 600W, NB-WL088-23, NB-WL007-02
• 900W Series: NB-201 900W, NB9-1301 900W, NB9-1301S 900W, NB9-1501 900W, NB-BX281B-23, NB9-0507, NB9-1301RG, NB9-0901, NB-BX177F-02
• 1000 Series Extractor Blender: Pro 1000, NB-202, N10-0807DG
• Prime Series: NB-202 1000W MAX, NB-BX537C-23, NB-BX354C-23
• Select Series: N9C-0901 950W MAX, NB-BX354C-23
• Max Series: NB-BX350-23, NB-204 1200W
• Pro Plus Series: N12-1001, NB BX586A 23
• Balance Bluetooth Smart Blender Extractor: N12S-0901, NB-BX519-23, NB-BX621-23, NB-205 1200W MAX

Incompatible Models:

These cups are NOT compatible with NutriBullet RX, NutriBullet Prime (specific models not listed above), or Original Magic Bullet blenders.

Image 3.1: Visual guide to compatible and incompatible NutriBullet blender models.

Image 3.2: Size comparison of 18oz, 24oz, and 32oz cups. This product includes 18oz cups.

4. Setup

The replacement cups are designed for straightforward setup. Follow these steps to prepare your cup for use:

1. Unpack: Carefully remove the cups and lip rings from their packaging.
2. Initial Cleaning: Before first use, wash the cups and lip rings with warm, soapy water. Rinse thoroughly and allow them to air dry completely.
3. Attach Lip Ring: If desired, screw the comfort lip ring onto the rim of the 18oz cup. Ensure it is securely fastened but do not overtighten.

Image 4.1: The 18oz cup ready for use, with the capacity clearly marked.

5. Operating Instructions

Using the replacement cups with your compatible NutriBullet blender is simple. Always refer to your blender's original instruction manual for specific blending guidelines and safety precautions.

1. Add Ingredients: Place your desired ingredients into the 18oz cup. Do not exceed the MAX fill line indicated on the cup.
2. Attach Blade: Securely twist your NutriBullet extractor blade (not included) onto the open end of the cup until it forms a tight seal.
3. Place on Base: Invert the cup and blade assembly and place it onto your compatible NutriBullet power base.
4. Blend: Press down and twist the cup to activate the blender, or follow your specific blender model's operating instructions. Blend until desired consistency is achieved.
5. Remove and Serve: Once blending is complete, lift the cup assembly from the power base. Carefully unscrew the blade assembly. You can then screw on the comfort lip ring for easy drinking, or pour the contents into another container.

Image 5.1: Example of cups filled with ingredients, ready for blending.

6. Cleaning & Maintenance

Proper cleaning and maintenance will extend the life of your replacement cups and ensure hygienic use.

• Dishwasher Safe: Both the 18oz cups and the comfort lip rings are dishwasher safe. Place them on the top rack for best results.
• Hand Washing: For hand washing, use warm water and mild dish soap. Use a brush if necessary to clean any residue. Rinse thoroughly.
• Drying: Allow all components to air dry completely before storing to prevent odor or bacterial growth.
• Material: The cups are made from BPA-free plastic, ensuring safety for food contact.

7. Troubleshooting

If you encounter any issues with your replacement cups, consider the following common solutions:

Issue: Cup leaks during blending.

• Solution 1: Ensure the extractor blade is twisted onto the cup securely and tightly. A loose blade can cause leaks.
• Solution 2: Check the rubber gasket on your extractor blade. If it is damaged, worn, or improperly seated, it can lead to leaks. Replace the blade if necessary.
• Solution 3: Do not overfill the cup beyond the MAX line. Overfilling can create excessive pressure and lead to leaks.

Issue: Cup does not fit on the blender base.

• Solution: Verify your NutriBullet blender model against the compatibility list in Section 3. These cups are not universal and will only fit the specified models.

8. Specifications

9. Warranty & Support

As a replacement part, these cups typically do not come with a separate manufacturer's warranty. Any warranty coverage would generally apply to the original NutriBullet blender unit itself.

For any questions regarding the compatibility, use, or care of these replacement cups, please contact the seller or the manufacturer of the replacement parts directly. If you have issues with your NutriBullet blender unit, please refer to your original NutriBullet blender manual or contact NutriBullet customer support.

Please note: We are not affiliated in any way with NutriBullet or Magic Bullet. This product is a compatible replacement part.