JAM Hang UP HX-P101 Shower Bluetooth Speaker User Manual

Introduction

Thank you for purchasing the JAM Hang UP HX-P101 Shower Bluetooth Speaker. This manual provides detailed instructions on how to set up, operate, and maintain your speaker to ensure optimal performance and longevity. Please read this manual thoroughly before using the product.

What's in the Box

Upon unboxing, please verify that all the following items are included:

• JAM Hang UP HX-P101 Speaker
• Integrated USB Charging Cable
• Quick Start Guide

Image: The box contents include the speaker, an integrated USB charging cable, and a quick start guide.

Setup and Charging

Initial Charging

Before first use, fully charge your JAM Hang UP speaker. The speaker features an integrated USB charging cable for convenience.

1. Locate the integrated USB charging cable on the speaker.
2. Plug the USB end into any standard USB power adapter (not included) or a computer's USB port.
3. The charging indicator light will illuminate. Allow approximately 2-3 hours for a full charge.
4. Once fully charged, the indicator light will change or turn off (refer to the Quick Start Guide for specific light behavior).

Image: Close-up of the JAM Hang UP speaker with its integrated USB cable plugged into a power source.

Powering On/Off

• To power on, press and hold the Power button until you hear an audible tone.
• To power off, press and hold the Power button again until you hear an audible tone.

Operating Instructions

Bluetooth Pairing

The JAM Hang UP speaker is designed for wireless audio streaming via Bluetooth.

1. Ensure the speaker is powered on and within 10 meters (30 feet) of your Bluetooth-enabled device.
2. The speaker will automatically enter pairing mode, indicated by a flashing LED light (refer to Quick Start Guide for specific light patterns).
3. On your device, enable Bluetooth and search for new devices.
4. Select "JAM Hang UP" from the list of available devices.
5. Once paired, the speaker will emit an audible confirmation, and the LED light will become solid.

The speaker has a Bluetooth range of up to 30 meters (100 feet), allowing flexibility in placement.

Image: The JAM Hang UP speaker is Bluetooth compatible, allowing connection up to 30 meters (100 feet) from your device.

Speakerphone Function

The JAM Hang UP speaker includes a built-in microphone for hands-free calling.

• When a call comes in, the music will pause, and the speaker will ring.
• Press the Play/Pause button (usually marked with a phone icon) to answer the call.
• Speak clearly towards the speaker.
• To end the call, press the Play/Pause button again. Music will resume automatically.
• To make a call, dial from your phone; the speaker will automatically function as a hands-free device.

Image: The speakerphone feature allows you to answer calls directly through the JAM Hang UP speaker without disconnecting your phone.

Aux-in Port

For devices without Bluetooth, use the Aux-in port.

• Connect a 3.5mm audio cable (not included) from your device's headphone jack to the Aux-in port on the speaker.
• The speaker will automatically switch to Aux-in mode.
• Control playback and volume directly from your connected device.

Using the Stick Pad

The innovative stick pad allows you to attach the speaker to various smooth, flat surfaces.

1. Ensure the surface is clean, dry, and smooth.
2. Press the stick pad firmly against the desired surface (e.g., shower wall, mirror, boat surface).
3. To remove, gently peel the speaker away from the surface.
4. If the stick pad loses adhesion, clean it with a damp cloth and let it air dry to restore stickiness.

Image: The sticky pad on the JAM Hang UP speaker allows it to adhere to flat, smooth surfaces like a shower wall or locker.

Battery and Playtime

The JAM Hang UP speaker provides up to 8 hours of playtime on a single charge, depending on volume levels and usage.

Image: The JAM Hang UP speaker offers up to 8 hours of continuous playtime.

Water and Dust Resistance (IP67 Rated)

The JAM Hang UP speaker is designed with an IP67 rating, making it dirt-proof and submersible in water up to one meter for 30 minutes. This makes it suitable for use in showers, by the pool, or in dusty environments.

• Ensure all port covers are securely closed before exposing the speaker to water or dust.
• Do not intentionally submerge the speaker for extended periods or beyond the specified depth.
• After exposure to water, wipe the speaker dry before charging.

Image: The JAM Hang UP speaker is IP67 rated, indicating it is water and dust proof.

Maintenance

• Cleaning: Use a soft, damp cloth to clean the speaker's exterior. Avoid harsh chemicals or abrasive cleaners.
• Stick Pad Care: If the stick pad loses its adhesion, gently wipe it with a damp cloth and allow it to air dry completely. Do not use soap or detergents.
• Storage: Store the speaker in a cool, dry place away from extreme temperatures and direct sunlight.

Troubleshooting

Specifications

Safety Information

• Do not attempt to disassemble or modify the speaker.
• Keep the speaker away from extreme heat sources, open flames, or direct sunlight for prolonged periods.
• Avoid dropping or subjecting the speaker to strong impacts.
• Do not use the speaker while charging in wet environments.
• Dispose of the speaker and its battery responsibly according to local regulations.

Warranty and Support

For warranty information and customer support, please refer to the Quick Start Guide included in your product packaging or visit the official Jam Audio website. Keep your proof of purchase for warranty claims.