1. Product Overview
The AOPUTTRIVER AP-007 is a compact, handheld digital anemometer designed for accurate measurement of wind speed and temperature. It features a clear LCD display with backlight, multiple measurement units, and a wind chill indicator. This device is suitable for various applications including drone flying, golf, shooting, HVAC installation, and general weather monitoring.
Figure 1: The AP-007 Handheld Anemometer displaying wind speed and temperature.
Key Features:
- Wind Speed Measurement: Range from 0.3 to 30 m/s with 0.1 m/s resolution.
- Temperature Measurement: Range from -10 to 45℃ (14 to 113℉).
- Wind Chill Function: Provides an indication of the perceived temperature.
- Multiple Units: Measures wind speed in m/s, km/h, ft/min, knots, and mph. Temperature in ℃/℉.
- Backlight Function: Enables use in low-light conditions.
- Auto Power Off: Automatically powers off after 5 minutes of inactivity to conserve battery.
- Tripod Mount: Integrated tripod hole for hands-free operation.
- Sensitive Vanes: Equipped with 8 sensitive vanes for accurate readings.
2. Product Components
The AP-007 Anemometer package includes the following items:
- 1 x AP-007 Anemometer
- 2 x 1.5V AAA Batteries
- 1 x Small Tripod
- 1 x Protective Case
- 1 x Lanyard
- 1 x Carry Case
- 1 x Instruction Manual
Figure 2: Included components in the AP-007 package.
3. Setup
3.1 Battery Installation
- Locate the battery compartment on the back of the anemometer.
- Open the battery cover.
- Insert two 1.5V AAA batteries, ensuring correct polarity (+/-).
- Close the battery cover securely.
3.2 Attaching the Lanyard
- Locate the lanyard attachment point at the bottom of the device.
- Thread the lanyard through the hole and secure it.
3.3 Tripod Mounting (Optional)
The AP-007 features a standard tripod mounting hole at its base for stable, hands-free measurements.
- Screw the anemometer onto the small tripod provided or any compatible tripod.
- Ensure the device is securely attached before use.
Figure 3: Tripod mounting point on the AP-007.
4. Operating Instructions
Figure 4: AP-007 Anemometer button layout and display indicators.
4.1 Power On/Off
- Press the Power (ⓘ) button to turn the device on.
- Press and hold the Power (ⓘ) button to turn the device off manually.
- The device will automatically power off after 5 minutes of inactivity.
4.2 Changing Wind Speed Units
- Press the UNIT button to cycle through the available wind speed units: m/s, km/h, ft/min, knots, and mph.
4.3 Changing Temperature Units
- Press the °F/°C button to switch between Celsius (℃) and Fahrenheit (℉).
4.4 Backlight Function
- Press the Backlight (☀) button to turn the LCD backlight on or off.
4.5 Max/Min/Average Measurement
- Press the MAX/MIN button to view the maximum or minimum wind speed recorded during the current measurement session.
- Press the AVG button to display the average wind speed.
4.6 Taking Measurements
- Hold the anemometer upright, ensuring the wind flow passes directly through the vanes for accurate readings.
- Avoid obstructing the airflow to the sensor.
- The current wind speed and temperature will be displayed on the LCD screen.
Video 1: Demonstration of the handheld anemometer in use for measuring wind speed, suitable for applications like drone flying and shooting.
5. Maintenance
5.1 Cleaning
- Wipe the device exterior with a soft, dry cloth.
- Gently clean the wind vanes to ensure they rotate freely and are free from dust or debris. Do not use harsh chemicals or abrasive materials.
Figure 5: The 8 sensitive wind vanes of the AP-007.
5.2 Battery Replacement
- Replace batteries when the low battery indicator appears on the display.
- Follow the battery installation steps in Section 3.1.
5.3 Storage
- Store the device in its protective case when not in use.
- Keep the anemometer in a cool, dry place, away from direct sunlight and extreme temperatures.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on | Low or dead batteries; Incorrect battery installation | Replace batteries; Ensure correct polarity |
| Inaccurate wind speed readings | Obstructed vanes; Device not positioned correctly; Damaged vanes | Clear obstructions; Ensure direct airflow; Inspect vanes for damage |
| Display is dim or not visible | Backlight off; Low battery | Press backlight button; Replace batteries |
| Device powers off unexpectedly | Auto power off activated; Low battery | This is normal behavior after 5 minutes of inactivity; Replace batteries |
7. Specifications
| Parameter | Value |
|---|---|
| Wind Speed Range | 0.3 - 30 m/s |
| Wind Speed Resolution | 0.1 m/s |
| Wind Speed Accuracy | ±5% of readings |
| Temperature Range | -10 - 45℃ (14 - 113℉) |
| Temperature Accuracy | ±2℃ (35.6℉) |
| Wind Speed Units | m/s, km/h, ft/min, knots, mph |
| Temperature Units | ℃, ℉ |
| Power Supply | 2 x 1.5V AAA Batteries |
| Dimensions (L x W x H) | Approx. 165mm x 85mm x 35mm (based on image PT02) |
| Weight | 200 Grams |
| Material | Plastic |
8. Warranty and Support
AOPUTTRIVER is committed to providing quality products and customer satisfaction. While specific warranty details are not provided, the manufacturer offers support for any issues encountered with the AP-007 Anemometer. If you experience any problems, please contact AOPUTTRIVER customer service for assistance. They aim to resolve issues within 24 hours.