Introduction
Thank you for choosing Covalliero Tecair Front Leg Protectors. These protectors are designed to provide optimal protection and comfort for your horse's front legs during various equestrian activities. Please read this manual carefully before use to ensure proper application, maintenance, and longevity of your product.
Product Overview
Image: A pair of Covalliero Tecair Front Leg Protectors, one brown and one dark grey/black, showing their robust outer shell and adjustable strap closures. These protectors are designed for the horse's front legs.
Image: A single Covalliero Tecair Front Leg Protector, shown from a side angle, highlighting the durable outer shell and the two strong hook-and-loop straps for secure fastening.
Image: A single Covalliero Tecair Front Leg Protector, viewed from the inner side, showcasing the contoured fit and the ventilation holes along the lower edge, designed for breathability.
Image: Covalliero Tecair Front Leg Protectors correctly fitted on the front legs of a horse, demonstrating their ergonomic design and how they sit securely above the hoof, providing protection to the cannon bone and fetlock area.
Setup and Application
- Preparation: Ensure the horse's legs are clean and dry before applying the protectors. Remove any dirt or debris that could cause rubbing.
- Identify Left/Right: While these protectors are generally symmetrical, ensure the contoured shape aligns correctly with the horse's leg anatomy. The wider part typically faces the front of the leg.
- Positioning: Place the protector around the horse's front cannon bone, ensuring it covers the sensitive areas such as the tendons and fetlock joint. The hard shell should be positioned on the outside/front of the leg for impact protection.
- Fastening Straps: Secure the two hook-and-loop straps firmly but not too tightly. Start with the upper strap, then the lower. Ensure there is enough space to slide two fingers comfortably between the protector and the horse's leg. Over-tightening can restrict circulation, while being too loose can cause slipping or rubbing.
- Check Fit: After fastening, flex the horse's leg gently to ensure the protector moves with the leg without pinching or slipping. The protector should remain in place during movement.
Operating Instructions (Usage)
Covalliero Tecair Front Leg Protectors are designed for use during various equestrian activities, including:
- Training: Provides protection against knocks and scrapes during schooling, flatwork, and jumping exercises.
- Turnout: Offers protection in the paddock, especially for horses prone to self-inflicted injuries or those in group turnout.
- Trail Riding: Guards against obstacles and debris encountered on trails.
- Transportation: Can be used during transport to prevent injury from bumps or rubs.
Always ensure the protectors are clean and properly fitted before each use. Regularly check the straps for wear and tear.
Maintenance and Care
Proper maintenance will extend the life of your Covalliero Tecair Front Leg Protectors:
- Daily Cleaning: After each use, wipe down the outer shell with a damp cloth to remove dirt, mud, and sweat.
- Deep Cleaning: For thorough cleaning, the protectors can be rinsed under running water. Use a mild soap if necessary. Avoid harsh chemicals or abrasive cleaners.
- Drying: Allow the protectors to air dry completely in a well-ventilated area, away from direct sunlight or heat sources. Do not tumble dry.
- Storage: Store the protectors in a clean, dry place when not in use. Avoid folding or creasing the hard shell.
- Strap Inspection: Regularly inspect the hook-and-loop fasteners for dirt accumulation or wear. Clean them with a stiff brush if needed to maintain their grip.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Protectors slip down or rotate. | Straps are too loose; incorrect sizing; horse's leg is wet/slippery. | Tighten straps appropriately; ensure correct size for your horse; clean and dry legs before application. |
| Rubbing or chafing on horse's leg. | Protectors are too tight; dirt/debris trapped underneath; incorrect positioning. | Loosen straps slightly; clean protectors and horse's legs thoroughly; adjust positioning for optimal fit. |
| Hook-and-loop fasteners losing grip. | Dirt/hair accumulation; wear and tear. | Clean fasteners with a stiff brush; if severely worn, consider replacement. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 3211619 |
| Product Dimensions | Approximately 26 x 12 x 8 cm (10.2 x 4.7 x 3.1 inches) per protector |
| Weight | Approximately 410 g (0.9 lbs) per pair |
| Brand | Covalliero (Manufactured by Kerbl) |
| Material | Durable outer shell, soft inner lining, hook-and-loop fasteners |
| Color | Brown (as per product description) |
Warranty and Support
This product is manufactured by Kerbl. For specific warranty information, please refer to the terms and conditions provided by your retailer or contact Kerbl customer service directly. Keep your proof of purchase for any warranty claims.
For further assistance or inquiries, please visit the official Kerbl website or contact their customer support. www.kerbl.com
