JEKCA 04S-M01

JEKCA Welsh Corgi 04S-M01 Building Blocks Instruction Manual

Model: 04S-M01 (ST19WC04-M01)

1. Introduction

This instruction manual provides detailed guidance for assembling your JEKCA Welsh Corgi 04S-M01 building block model. Please read all instructions carefully before beginning assembly to ensure a successful and enjoyable building experience. JEKCA models utilize a patented interlocking brick-through system designed for stability and durability.

Assembled JEKCA Welsh Corgi model with dimensions: 33.8cm length, 16.7cm height, 8.8cm width.

Image 1.1: Completed JEKCA Welsh Corgi model with approximate dimensions (Length: 33.8 cm, Height: 16.7 cm, Width: 8.8 cm).

2. Safety Information

  • Age Recommendation: This product contains small parts and is recommended for individuals 14 years of age or above.
  • Choking Hazard: Keep small parts away from young children and pets.
  • Handling: Handle the pin driver and pins with care to avoid injury.

3. Package Contents

Verify that all the following components are included in your package:

  • Building Bricks (over 940 pieces)
  • Instruction Manual (this document)
  • Pin Driver
  • Pins
  • Quick Guide (specific model assembly guide)
Close-up view of individual JEKCA building blocks.

Image 3.1: Example of JEKCA building blocks.

4. Assembly Instructions

The JEKCA building system uses a unique interlocking mechanism to create sturdy models without the need for glue. Follow these general steps, and refer to the included Quick Guide for model-specific instructions.

4.1 Understanding the Interlocking System

Each JEKCA brick is designed to interlock with others using small pins. These pins are inserted through the bricks and then rotated to secure them in place, creating a robust structure.

Diagram illustrating the JEKCA interlocking system: insert pin, then turn 90 degrees with a driver.

Image 4.1: Basic principle of the JEKCA interlocking system.

Illustration of JEKCA's patented interlocking brick-through technology using pins to secure blocks.

Image 4.2: Visual representation of the patented interlocking brick-through technology.

4.2 Step-by-Step Assembly

  1. Prepare Your Workspace: Ensure you have a clean, well-lit, and organized area to prevent loss of small parts.
  2. Sort Bricks: It is recommended to sort your bricks by color and type before starting.
  3. Follow the Quick Guide: Refer to the model-specific Quick Guide for the exact sequence of brick placement.
  4. Insert Pins: As indicated in the Quick Guide, place the bricks together and insert a pin through the designated holes.
  5. Secure with Pin Driver: Use the provided pin driver to turn the pin 90 degrees. This locks the bricks firmly in place. Ensure each pin is fully turned for maximum stability.
  6. Continue Building: Repeat the process, layer by layer, until your model is complete.
Three-step diagram showing JEKCA block assembly: 1. Align blocks, 2. Insert pins, 3. Turn pins 90 degrees with driver.

Image 4.3: Detailed three-step assembly process.

A JEKCA panda model under construction, illustrating the block-by-block assembly process.

Image 4.4: Example of a JEKCA model during assembly.

5. Care and Maintenance

  • Cleaning: To clean your assembled model, gently wipe it with a soft, dry cloth. For stubborn dust, a slightly damp cloth can be used, followed by immediate drying. Avoid harsh chemicals or abrasive cleaners.
  • Storage: Store the model in a stable location away from direct sunlight and extreme temperatures to prevent material degradation or discoloration.
  • Disassembly: If you need to disassemble the model, use the pin driver to rotate the pins back to their original position before separating the bricks.

6. Troubleshooting

  • Model is not sturdy: Ensure all pins are fully inserted and rotated 90 degrees using the pin driver. If a section feels loose, re-check the pins in that area.
  • Missing parts: If you find any missing bricks or pins, please contact JEKCA customer support with your purchase details.
  • Difficulty inserting pins: Ensure the bricks are correctly aligned. Do not force pins; if resistance is met, check for misalignment or obstructions.

7. Product Specifications

Feature Detail
Brand JEKCA
Model Name Welsh Corgi 04S-M01
Model Number ST19WC04-M01
Number of Pieces 940+
Material Plastic
Color Orange and White
Assembled Dimensions (L x W x H) 33.8 cm x 8.8 cm x 16.7 cm (approx. 13.3 x 3.5 x 6.6 inches)
Item Weight 0.91 Kilograms (approx. 2 lbs)
Recommended Age 14 years and above
Educational Objective Concentration, Construction Skills
Two completed JEKCA Welsh Corgi models, one orange and white, one black and white.

Image 7.1: Completed JEKCA Welsh Corgi models.

8. Warranty Information

For detailed warranty information regarding your JEKCA product, please refer to the manufacturer's official website or contact JEKCA customer support directly. Warranty terms and conditions may vary by region and product.

9. Customer Support

If you have any questions, require assistance with assembly, or need to report missing parts, please contact JEKCA customer support:

  • Online: Visit the official JEKCA website or their Amazon store page for contact options.
  • Amazon Store: JEKCA Amazon Store

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.