Bush Business Furniture 96W x 42D Boat Shaped Conference Table with Metal Base and 8 High Back Office Chairs Instruction Manual

1. Product Overview

This manual provides detailed instructions for the Bush Business Furniture 96W x 42D Boat Shaped Conference Table and the accompanying set of 8 High Back Office Chairs. This furniture set is designed to facilitate collaboration and productivity in office environments.

Key Features:

• Conference Table: 96W x 42D Boat Shaped design with a metal base.
• Seating Capacity: Comfortably accommodates up to 8 users.
• Table Surface: 1-inch thick, thermally fused laminate surface, resistant to scratches and stains.
• Wire Management: Two built-in wire management grommets for electronic devices.
• Chairs: Set of 8 High Back Leather Executive Office Chairs with stylish Dark Gray bonded leather upholstery and chrome accents.
• Durability: Metal base provides strength and stability; durable edge banding protects against damage.

Image 1.1: The Bush Business Furniture conference table and chairs set in a Storm Gray finish, ready for use in an office setting.

2. Setup Instructions

Assembly of both the conference table and the set of 8 high back office chairs is required. It is recommended to have at least two people for assembly to ensure safety and ease of construction.

2.1. Before You Begin:

• Unpack: Carefully unpack all components and verify against the parts list provided in the separate assembly guide.
• Tools: Ensure you have the necessary tools as specified in the assembly guide (e.g., screwdriver, wrench).
• Space: Clear a spacious area for assembly to prevent damage to components or flooring.

2.2. Table Assembly (General Steps):

1. Attach the metal base components to the tabletop using the provided hardware.
2. Ensure all connections are secure and stable.
3. Place the table in its desired location.

2.3. Chair Assembly (General Steps):

1. Assemble the chair base and casters.
2. Attach the gas lift cylinder to the base.
3. Connect the seat and backrest components.
4. Secure armrests and any other adjustable features.

Note: Refer to the detailed assembly instructions included with your product packaging for specific step-by-step guidance and diagrams for both the table and chairs.

Image 2.1: Detail of the sturdy metal base providing stability to the conference table.

Image 2.2: Diagram showing the dimensions of the conference table and a high-back executive office chair.

3. Operating Instructions

3.1. Conference Table Usage:

• Wire Management Grommets: Utilize the two built-in grommets on the tabletop to route power cords and data cables for laptops, projectors, and other electronic devices, keeping the surface tidy and organized.
• Surface Protection: While the thermally fused laminate surface is scratch and stain-resistant, it is advisable to use coasters for beverages and placemats for hot items to prolong the table's appearance.

3.2. High Back Office Chair Usage:

The high back executive office chairs are designed for comfort and support during long meetings. They feature standard office chair adjustments.

• Height Adjustment: Use the lever located under the seat to adjust the chair height to ensure your feet are flat on the floor or a footrest, and your thighs are parallel to the floor.
• Tilt Mechanism: Most executive chairs include a tilt function. Use the corresponding lever or knob to adjust the recline tension or lock the chair in an upright position.
• Mobility: The chairs are equipped with casters for easy movement across various floor surfaces.

4. Maintenance

4.1. General Care:

• Cleaning: Wipe surfaces with a damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the laminate or faux leather.
• Spills: Clean spills immediately to prevent staining, especially on the faux leather chairs.
• Inspection: Periodically check all screws and fasteners on both the table and chairs to ensure they remain tight. Tighten as necessary.
• Chair Casters: Keep chair casters free of debris (hair, dust) to ensure smooth movement.

Image 4.1: Detail of the durable edge banding on the conference table, designed to protect against daily wear and tear.

5. Troubleshooting

This section addresses common issues you might encounter with your conference table and chairs.

5.1. Table Instability:

• Wobbling: Check all connections at the base and tabletop. Tighten any loose screws. Ensure the table is on a level surface.
• Uneven Floor: If the floor is uneven, adjust the leveling glides on the table base (if present) to stabilize the table.

5.2. Chair Issues:

• Difficulty Adjusting Height: Ensure the gas lift lever is fully engaged. If the chair still doesn't adjust, the gas lift cylinder may need replacement.
• Squeaking: Apply a small amount of silicone spray to moving parts, such as the tilt mechanism or caster stems.
• Casters Not Rolling Smoothly: Remove any hair or debris from the caster wheels. If severely damaged, casters can be replaced.

If you encounter issues not covered here or require further assistance, please contact customer support.

6. Specifications

Image 6.1: A detailed view of the Storm Gray laminate surface, showcasing its texture and finish.

7. Warranty Information

This Bush Business Furniture product is backed by a Limited Lifetime Warranty. This warranty covers defects in materials and workmanship under normal use and service.

For specific details regarding coverage, limitations, and how to file a warranty claim, please refer to the warranty documentation included with your purchase or visit the official Bush Business Furniture website.

8. Customer Support

Should you require assistance with assembly, parts replacement, or have any questions regarding your Bush Business Furniture conference table and chairs, please contact customer support.

• Online Support: Visit the Bush Business Furniture Store on Amazon for product information and resources.
• Contact Manufacturer: Refer to the contact information provided in your product packaging for direct manufacturer support.