1. Introduction
Thank you for choosing the Respekta CH 1259 IXCN Under-Cabinet Cooker Hood. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new appliance. Please read these instructions carefully before use and keep them for future reference.
This cooker hood is designed to effectively remove cooking fumes and odors from your kitchen, ensuring a fresh and clean environment. Its compact and slim design makes it ideal for under-cabinet installation, saving valuable kitchen space.
Image 1.1: Front view of the Respekta CH 1259 IXCN cooker hood.
2. Safety Information
General Safety:
- Ensure the appliance is installed by a qualified technician in accordance with local regulations.
- Always disconnect the power supply before cleaning or performing maintenance.
- Do not flambé under the cooker hood.
- Do not leave frying food unattended, as overheated oil can ignite.
- The air must not be discharged into a flue that is used for exhausting fumes from appliances burning gas or other fuels.
- Adequate ventilation must be provided when the range hood is used at the same time as appliances burning gas or other fuels.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
Electrical Safety:
- Check that the mains voltage corresponds to the voltage indicated on the rating plate inside the hood.
- The appliance must be properly earthed.
- Do not pull the power cord to disconnect the plug.
3. Product Components
The Respekta CH 1259 IXCN cooker hood includes the main unit and essential accessories for operation.
- Cooker Hood Unit (Stainless Steel)
- Metal Grease Filters (MIZ 1259 IXCN)
- LED Lighting
- Power Cable (135 cm)
- Raw Plug Connection for Exhaust Air (120 cm)
Image 3.1: Underside view showing the metal grease filters and LED lighting.
4. Setup and Installation
The Respekta CH 1259 IXCN cooker hood is designed for under-cabinet installation, offering a space-saving solution for your kitchen. Professional installation is recommended.
Installation Steps:
- Mounting: Securely mount the cooker hood under a kitchen cabinet. Ensure sufficient clearance above the cooking surface as per safety standards.
- Electrical Connection: Connect the 135 cm power cable to a suitable power outlet. Ensure the voltage matches the appliance requirements (220V, 50Hz).
- Ventilation System: For exhaust air operation, connect the 120 cm raw plug connection to your existing ventilation ducting. Ensure the ducting is clear and properly sealed.
- Recirculation Mode (Optional): If using recirculation mode, ensure activated carbon filters (not included, sold separately) are installed to filter odors before returning air to the kitchen.
Image 4.1: The cooker hood in an under-cabinet installation, showing the extended glass panel.
Image 4.2: Key features including energy efficiency, German development, and 60 cm width.
5. Operating Instructions
The cooker hood features user-friendly push-button controls for easy operation of its functions.
Control Panel:
- Power Button: Turns the hood on/off.
- Speed Selection Buttons: Choose from three power levels (Low, Medium, High) to adjust extraction intensity.
- Light Button: Activates or deactivates the LED lighting.
Image 5.1: Close-up of the push-button controls and LED light.
Image 5.2: Illustration of push-button controls and 1x2 Watt LED lighting for clear visibility of the cooking surface.
Power Levels:
- Low (Niedrig): Suitable for light odors and simmering.
- Medium (Mittel): Ideal for moderate cooking fumes.
- High (Hoch): For strong odors and heavy cooking.
Image 5.3: Explanation of the three power levels and their corresponding air flow rates.
Noise Level: The cooker hood operates with a noise level between 45-61 dB, ensuring a comfortable kitchen environment even at higher settings.
Image 5.4: Illustration highlighting the quiet operation of the cooker hood, with noise levels ranging from 45-61 dB.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your cooker hood.
Cleaning the Metal Grease Filters:
- The metal grease filters (MIZ 1259 IXCN) are washable and designed to collect cooking grease.
- Remove the filters by pulling the release tabs.
- Clean the filters regularly (approximately every 2-4 weeks, depending on usage) either by hand with hot soapy water or in a dishwasher.
- Ensure filters are completely dry before re-installing.
Image 6.1: Illustration of the metal grease filters (MIZ 1259 IXCN) and their dishwasher-safe feature.
Cleaning the Exterior:
- Clean the stainless steel exterior with a soft cloth and a non-abrasive cleaner specifically designed for stainless steel.
- Avoid using abrasive pads or harsh chemicals that could damage the surface.
Replacing LED Lights:
- Ensure the power supply is disconnected before attempting to replace the LED lights.
- Refer to a qualified technician for light replacement if you are unsure.
7. Troubleshooting
If you encounter any issues with your cooker hood, refer to the following troubleshooting guide before contacting customer service.
| Problem | Possible Cause | Solution |
|---|---|---|
| Hood does not operate | No power supply Power cable not connected | Check power connection and fuse Ensure power cable is securely plugged in |
| Low suction power | Grease filters are dirty Incorrect speed setting Obstruction in ducting | Clean or replace grease filters Select a higher speed setting Check ducting for blockages |
| Lights not working | Faulty LED light Loose connection | Contact a qualified technician for replacement Check light connections (with power off) |
| Excessive noise | Loose components Improper installation Dirty filters | Check for loose screws or parts Ensure hood is securely mounted Clean filters |
8. Specifications
Detailed technical specifications for the Respekta CH 1259 IXCN cooker hood:
| Feature | Specification |
|---|---|
| Model Number | CH1259IXCN |
| Brand | Respekta |
| Dimensions (D x W x H) | 50 cm x 59.8 cm x 14 cm |
| Weight | 5.2 kg |
| Material | Stainless Steel |
| Control Type | Push Button |
| Power Levels | 3 |
| Noise Level (Max) | 61 dB |
| Power Consumption | 72 Watts |
| Voltage | 220 Volts |
| Frequency | 50 Hz |
| Filter Type | Mesh (Metal Grease Filter MIZ 1259 IXCN) |
| Light Source | LED (1x2 Watt) |
| Ventilation Type | Ducted (Exhaust Air) / Recirculation (with optional carbon filter) |
| Installation Type | Under-cabinet |
9. Warranty and Support
Respekta stands for quality and reliability, with over 50 years of experience in manufacturing. Your product is backed by our commitment to quality and customer satisfaction.
Image 9.1: Respekta's commitment to quality and customer service.
For warranty claims, technical support, or spare parts, please contact Respekta customer service. Ensure you have your model number (CH1259IXCN) and purchase details available.
Contact Information:
- Please refer to the Respekta official website or your purchase documentation for the most up-to-date contact details for your region.
- Online Support: www.respekta.de (Example link, please verify)
Image 9.2: Respekta's quality control process, checking air performance, noise level, functionality, and motor.