Kuzco Lighting Draven CH19732-WH LED Chandelier User Manual

1. Introduction

Thank you for choosing the Kuzco Lighting Draven CH19732-WH LED Chandelier. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.

The Draven chandelier features overlapping aluminum arms with a finely executed powder-coat white finish. It incorporates tapered round translucent diffusers and gold brushed accent rings, providing both up and down light. This fixture is designed for indoor use and is dimmable with a compatible ELV or TRIAC dimmer (not included).

Figure 1: Kuzco Lighting Draven CH19732-WH LED Chandelier. This image displays the chandelier's overall design, featuring its white finish, gold accents, and multiple LED light sources arranged in an overlapping arm structure.

2. Safety Information

• Always turn off the main power supply at the circuit breaker before installing, servicing, or cleaning the fixture.
• Consult a qualified electrician if you are unsure about the installation process.
• Ensure all electrical connections are made in accordance with local codes and ordinances, as well as the National Electric Code (NEC).
• Do not connect this fixture to an ungrounded electrical system.
• Handle the fixture with care to avoid damage to the LED components or glass diffusers.
• Do not attempt to modify the fixture in any way. Unauthorized modifications may void the warranty and create safety hazards.
• This product is designed for indoor use only. Do not expose to moisture or extreme temperatures.
• Please check your local laws and building codes before purchasing and installing this product.

3. Package Contents

Carefully unpack your fixture and check that all parts are included. Keep all packaging materials until you are satisfied with the installation.

• Draven LED Chandelier Fixture (1)
• Mounting Hardware Kit (includes canopy, mounting plate, screws, wire nuts) (1)
• Integrated LED Bulbs (pre-installed)
• Instruction Manual (this document)

4. Specifications

Note: Specifications are subject to change without notice.

5. Setup and Installation

Professional installation by a qualified electrician is highly recommended for this fixture. Ensure power is OFF at the circuit breaker before proceeding.

Figure 2: Dimensional Diagram of the Draven Chandelier. This diagram illustrates the key measurements of the chandelier, including its length (32-1/8"), width (14-1/2"), height (9"), canopy dimensions (11" x 5-7/8" x 1-5/8"), and maximum adjustable stem length (46"). It also points out the metal finish and gold brushed rings.

5.1 Pre-Installation

1. Turn off power at the main circuit breaker.
2. Carefully remove the new fixture from its packaging and inspect for any damage.
3. Review the dimensional diagram (Figure 2) to ensure the fixture size is appropriate for your installation location.
4. Gather necessary tools: screwdriver, wire strippers, electrical tape, ladder, safety glasses.

5.2 Mounting the Fixture

1. Attach the mounting plate to the junction box in the ceiling using the provided screws. Ensure it is securely fastened.
2. Determine the desired hanging height and adjust the stem length accordingly. The maximum stem length is 46 inches.
3. Connect the fixture's wires to the corresponding wires from the junction box:
   • Connect the black fixture wire to the black (Live) supply wire.
   • Connect the white fixture wire to the white (Neutral) supply wire.
   • Connect the green/bare copper fixture wire to the green/bare copper (Ground) supply wire.
   Secure connections with wire nuts and electrical tape.
4. Carefully tuck all wires into the junction box.
5. Attach the fixture canopy to the mounting plate, securing it with the provided screws or decorative nuts.
6. Ensure the fixture is stable and level.

5.3 Post-Installation

1. Restore power at the main circuit breaker.
2. Test the fixture to ensure it operates correctly.

6. Operating Instructions

• Turning On/Off: Operate the chandelier using a standard wall switch connected to the fixture's circuit.
• Dimming Function: This fixture is dimmable. To utilize the dimming feature, ensure you have a compatible ELV (Electronic Low Voltage) or TRIAC (Forward Phase) dimmer switch installed. Follow the dimmer manufacturer's instructions for proper operation.
• Remote Control: If a remote control was included with your specific model, refer to its separate instructions for pairing and operation.

7. Maintenance

• Cleaning: To clean the fixture, turn off the power and allow it to cool. Wipe with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or LED components.
• LED Care: The LED components in this fixture are integrated and designed for long life. They are not user-replaceable. If the LEDs fail, contact Kuzco Lighting customer support.
• Inspection: Periodically inspect the fixture for any signs of wear, loose connections, or damage. If any issues are found, turn off power and consult a qualified electrician.

8. Troubleshooting

If troubleshooting steps do not resolve the issue, contact customer support.

9. Warranty and Support

This Kuzco Lighting product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Kuzco Lighting website.

For technical assistance, replacement parts, or warranty claims, please contact Kuzco Lighting customer support:

• Website: www.kuzcolighting.com (Example link, verify actual website)
• Phone: Refer to the Kuzco Lighting website for contact numbers.
• Email: Refer to the Kuzco Lighting website for contact email.

Please have your model number (CH19732-WH) and proof of purchase ready when contacting support.