1. Introduction
This manual provides essential information for the safe and efficient operation of your lightmaXX VEGA Mini PAR Quad 7x8W RGBW LED PAR Spot. Please read this manual thoroughly before installation and use, and retain it for future reference.
2. Safety Information
Always observe the following safety precautions to prevent electric shock, fire, or injury:
- Ensure the device is connected to a grounded power outlet.
- Do not expose the device to rain or moisture.
- Do not open the housing; there are no user-serviceable parts inside. Refer all servicing to qualified personnel.
- Avoid direct eye exposure to the light source.
- Ensure adequate ventilation around the unit.
- Mount the device securely using appropriate hardware.
3. Product Overview
The lightmaXX VEGA Mini PAR Quad is a compact LED PAR spot designed for stage lighting, decorative lighting, and various production environments. It features 7 powerful 8W QCL (Quadcolor) LEDs, offering a full RGBW color spectrum for homogeneous color mixing. Its compact size makes it suitable for small stages and versatile applications.
Figure 1: Front view of the lightmaXX VEGA Mini PAR Quad LED PAR spot, showing the seven LED lenses.
Figure 2: Side view of the LED PAR spot, illustrating the adjustable mounting bracket for flexible positioning.
Figure 3: Detailed view of the seven 8W Quadcolor LEDs, capable of producing a wide range of colors.
4. Setup
4.1 Unpacking
Carefully remove the device from its packaging. Inspect for any damage during transit. Retain the packaging for future transport or storage.
4.2 Mounting
The VEGA Mini PAR Quad is designed for versatile mounting, including ceiling mounting. Use the integrated mounting bracket to secure the fixture. Ensure all clamps and fasteners are tightened securely. Always use a safety cable when suspending the unit overhead.
4.3 Connections
The unit features standard DMX input and output connectors for control via a DMX controller, and a power input for AC mains power.
Figure 4: Rear panel with the digital display, control buttons, DMX In/Out, and power input.
Figure 5: Close-up of the digital display and navigation buttons for menu access and setting adjustments.
- Power Connection: Connect the power cable to a suitable AC mains power supply.
- DMX Connection (Optional): For DMX control, connect a DMX cable from your DMX controller's output to the DMX IN connector on the fixture. If linking multiple units, connect from the first unit's DMX OUT to the next unit's DMX IN.
5. Operating Instructions
5.1 Control Panel
The rear panel features a 4-digit LED display and four control buttons (Menu, Up, Down, Enter) for navigating settings and selecting operating modes.
5.2 Operating Modes
The VEGA Mini PAR Quad typically offers several operating modes:
- DMX Mode: Allows external control via a DMX controller. Set the DMX address using the control panel.
- Auto Mode: Runs built-in automated programs. Speed and other parameters may be adjustable.
- Sound Active Mode: Reacts to sound via an internal microphone, synchronizing light changes to music.
- Static Color Mode: Select a fixed color from the RGBW spectrum.
- Master/Slave Mode: Link multiple units where one acts as the master, controlling the others (slaves).
5.3 Color Mixing (RGBW)
The 7x8W QCL LEDs allow for smooth and vibrant RGBW color mixing. This enables the creation of a vast palette of colors, including pastels and pure white, by adjusting the intensity of red, green, blue, and white LEDs.
Figure 6: The LED PAR spot projecting a focused red light beam.
Figure 7: The LED PAR spot projecting a focused green light beam.
Figure 8: The LED PAR spot illuminated with a blue light, showcasing its color capabilities.
6. Maintenance
6.1 Cleaning
Regular cleaning helps maintain optimal performance and extends the lifespan of your fixture. Use a soft, lint-free cloth to wipe the exterior and lenses. For stubborn dirt, a mild glass cleaner can be applied to the cloth (not directly to the fixture). Ensure the unit is powered off and disconnected before cleaning.
6.2 Storage
When not in use, store the fixture in its original packaging or a suitable case in a dry, dust-free environment.
7. Troubleshooting
If you encounter issues with your VEGA Mini PAR Quad, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power / Unit does not turn on | No power supply; Faulty cable; Blown fuse | Check power connection; Test power cable; Replace fuse (if accessible and safe to do so). |
| No light output | Incorrect mode selected; DMX signal issue; Internal fault | Verify operating mode; Check DMX connections and address; Contact support if problem persists. |
| Incorrect colors / Flickering | DMX signal interference; Incorrect DMX channel values; Internal fault | Check DMX cable integrity; Verify DMX controller settings; Try standalone mode to isolate issue. |
If these steps do not resolve the issue, please contact lightmaXX customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Model | VEGA Mini PAR Quad 7x8W RGBW |
| Manufacturer | lightmaXX |
| Light Source | 7 x 8W Quadcolor LEDs (RGBW) |
| Beam Angle | 25° |
| Power Source | AC Mains Power (Note: Product specifications provided mention 'Battery', which is typically not applicable for this type of stage lighting fixture and may be a data entry error.) |
| Mounting Type | Ceiling mounting (via bracket) |
| Product Dimensions (L x W x H) | 31 x 16.5 x 16 cm |
| ASIN | B07NDRW92K |
| Part Number | LIG0015729-000 |
| Country of Origin | Germany |
9. Warranty & Support
For warranty information and technical support, please refer to the documentation provided with your purchase or contact lightmaXX directly. Keep your proof of purchase for any warranty claims.
Manufacturer: lightmaXX
