Important Safety Warnings
WARNING: Read the instructions and warnings carefully before use. Failure to follow these instructions can result in serious injury or death. Always disconnect the power supply before performing any maintenance or service.
Product Overview
The Intex SX2100 Sand Filter Pump is designed for efficient filtration of pool water, suitable for pools up to 36 cubic meters. It features a low-maintenance design, with sand requiring replacement approximately every 5 years and glass media every 9 years. The integrated programmer and 6-way valve provide versatile control over various filtration and maintenance functions.
Image: The Intex SX2100 Sand Filter Pump, showing the sand tank, pump motor, and multi-port valve assembly. This unit is designed for comprehensive pool water filtration.
Image: Close-up view of the 6-way multi-port valve on the Intex SX2100 Sand Filter Pump, indicating various operational modes like filtration, backwash, and rinse.
Key Features
- Simplicity: Digital control panel with integrated programmer and On/Off position.
- Versatility: 6-way valve allows changing modes based on needs (filtration, backwash, rinse, etc.).
- Filtration: The Intex SX2100 sand filter offers fine filtration, eliminating most residues.
- Durability: High-quality sand filter adaptable to all Intex pools thanks to included adapters (32/38mm).
- Easy Maintenance: The Intex SX2100 sand filter requires very little maintenance. Sand only needs changing every 5 years, and glass media every 9 years.
Image: The digital control panel of the Intex SX2100 Sand Filter Pump, featuring a display, power button, lock/unlock button, and timer button for easy operation.
Image: A clear view of the removable pre-filter basket inside the Intex SX2100 Sand Filter Pump, designed to capture larger debris before it reaches the sand media.
Setup Instructions
- Unpacking: Carefully remove all components from the packaging. Verify all parts are present according to the packing list.
- Placement: Position the sand filter pump on a firm, level surface, ideally close to the pool and a power outlet, ensuring it is protected from direct weather exposure.
- Sand/Glass Media Installation: Remove the multi-port valve and fill the tank with the recommended amount of filter sand (23 kg) or glass media. Ensure the standpipe is centered during filling.
- Valve Assembly: Reattach the 6-way multi-port valve to the tank, ensuring a secure and watertight seal.
- Hose Connections: Connect the inlet and outlet hoses from the pump to your pool's skimmer and return jet. Use the provided adapters (32mm/38mm) for compatibility with Intex pools.
- Power Connection: Connect the power cord to a grounded electrical outlet. Ensure the power supply matches the pump's requirements.
- Priming the Pump: Before starting, ensure the pump is primed by filling the pump housing with water. Refer to the specific priming instructions in the full manual.
Image: A person is shown setting up the Intex sand filter pump next to an above-ground pool, demonstrating the connection of hoses and positioning of the unit.
Operating Instructions
6-Way Valve Functions:
- Filtration: Standard mode for filtering and cleaning the pool water.
- Backwash: Reverses water flow to clean the filter media. Perform when the pressure gauge indicates high pressure.
- Rinse: Used for initial cleaning of new sand and to level the sand after backwashing.
- Drain: For direct cleaning to the drain (e.g., with a vacuum), lowering the water level, or emptying the pool.
- Circulation: Circulates pool water without passing through the filter media.
- Closed: Closes all water inlets to the filter and pool. Use for maintenance or when the pump is off for extended periods.
Digital Control Panel:
- On/Off: Press the power button to turn the pump on or off.
- Programmer: Use the digital controls to set filtration cycles and operating times.
- Lock/Unlock: Use the lock button to prevent accidental changes to settings.
Image: Close-up of the pressure gauge on the Intex SX2100 Sand Filter Pump, used to monitor the filter's condition and determine when backwashing is needed.
Maintenance
- Filter Media Replacement: Sand media should be changed approximately every 5 years. Glass filter media lasts longer, typically around 9 years.
- Pre-filter Cleaning: The large, removable pre-filter should be regularly inspected and cleaned to prevent debris from entering the pump and filter.
- Pressure Gauge Monitoring: Regularly check the manometer (pressure gauge) to verify the clogging status of the filter. An increase in pressure indicates the need for backwashing.
- Winterization: For winter storage, ensure the filter is completely drained. Use the "Closed" position on the 6-way valve and follow specific winterization procedures to prevent freezing damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow | Clogged pre-filter basket; Dirty filter sand; Air in the system. | Clean pre-filter; Perform backwash and rinse; Bleed air from the system. |
| Pump Not Starting | No power; Motor overload; Impeller jammed. | Check power connection/breaker; Allow motor to cool; Inspect impeller for obstructions. |
| Water Not Clear | Insufficient filtration time; Dirty filter media; Incorrect chemical balance. | Increase filtration duration; Backwash/rinse filter; Test and adjust pool chemistry. |
Specifications
- Manufacturer: Intex
- Model Number: 26646FR
- Dimensions (L x W x H): 53 x 35 x 56 cm (20.9 x 13.8 x 22 inches)
- Weight: 11.77 kg (25.95 lbs)
- Flow Rate: 6 m³/h (6 cubic meters per hour)
- Tank Diameter: 305 mm
- Sand Capacity: 23 kg
- Granulometry (Sand): 0.4 to 0.8 mm
- Recommended Pool Volume: Up to 36 m³
- Included Components: Sand filter pump
- Material: Plastic
- Color: White
Warranty and Support
For warranty information and technical support, please refer to the documentation included with your product or visit the official Intex website. Keep your purchase receipt as proof of purchase for any warranty claims.
Online Resources: For additional support, FAQs, and product registration, please visit www.intexcorp.com.
