AEG DGE5861HM
AEG DGE5861HM Cooker Hood User Manual
Model: DGE5861HM
1. Introduction
This manual provides essential information for the safe and efficient use of your AEG DGE5861HM cooker hood. Please read these instructions carefully before installation and operation, and keep them for future reference. Proper installation, operation, and maintenance are crucial for the appliance's performance and your safety.
2. Safety Information
General Safety:
- Ensure the appliance is disconnected from the power supply before any maintenance or cleaning.
- Installation must be performed by a qualified professional in accordance with local regulations.
- Do not flambé under the cooker hood.
- Never leave frying food unattended, as overheated oil can ignite.
- Regularly clean the grease filters to prevent fire hazards.
- The air must not be discharged into a flue that is used for exhausting fumes from appliances burning gas or other fuels.
- Adequate ventilation must be provided when the range hood is used at the same time as appliances burning gas or other fuels.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
Electrical Safety:
- Check that the voltage indicated on the rating plate corresponds to the mains voltage in your home.
- Do not use extension cords or multiple adapters.
- If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
3. Product Overview
The AEG DGE5861HM is a high-performance built-under cooker hood designed to efficiently remove cooking fumes and odors from your kitchen. It features advanced technology for ease of use and energy efficiency.
Key Features:
- Hob2Hood Function: Automatically controls the cooker hood and its lights based on your hob's activity.
- Efficient Motor: Provides powerful extraction for quick air purification.
- LED Lighting: Long-lasting, energy-efficient, and bright illumination for your cooking area.
- Electronic Controls: Intuitive touch controls for adjusting settings.
- Washable Metal Grease Filters: Easy to clean and maintain for consistent performance.
- Remote Control: For convenient operation from a distance.

Image 1: Front view of the AEG DGE5861HM cooker hood, showcasing its sleek design and integrated lighting.
4. Setup and Installation
The AEG DGE5861HM cooker hood is designed for under-cabinet mounting. Due to the complexity of installation, it is highly recommended that a qualified technician performs the setup to ensure proper functioning and safety.
Included Components:
- AEG DGE5861HM Cooker Hood Unit
- Remote Control
- Quick Installation Guide (refer to this for detailed mounting instructions)
Installation Considerations:
- Ensure adequate space and structural support within the cabinet for mounting.
- Proper ducting for exhaust ventilation is essential. The hood supports exhaust ventilation.
- Electrical connections must comply with local codes and the appliance's specifications (220-240V).
5. Operating Instructions
Your cooker hood offers various functions for efficient air purification and lighting.
5.1. Power On/Off
Press the power button on the electronic control panel or the remote control to switch the hood on or off.
5.2. Adjusting Fan Speed
The hood features 4 fan speeds. Use the '+' and '-' buttons on the control panel or remote to cycle through the speeds (Low, Medium, High, Intensive). The intensive speed provides maximum extraction for heavy cooking fumes and will typically revert to a lower speed after a set period.
5.3. Hob2Hood Function
The Hob2Hood function allows the cooker hood to automatically adjust its fan speed and lighting based on the activity of a compatible AEG hob. To activate this feature, ensure your hob is also Hob2Hood compatible and follow its instructions for pairing. When active, the hood will respond to cooking intensity, increasing extraction as needed.
5.4. Lighting Control
Press the light button on the control panel or remote control to turn the LED lights on or off. The lights provide clear illumination for your cooking surface.

Image 2: A cooking scene demonstrating the cooker hood in operation, effectively extracting steam and fumes from a pot on the hob.
6. Maintenance and Cleaning
Regular maintenance ensures optimal performance and extends the lifespan of your cooker hood. Always disconnect the appliance from the power supply before cleaning or maintenance.
6.1. Cleaning Metal Grease Filters
The metal grease filters trap grease particles from cooking fumes and should be cleaned regularly (approximately every 2-4 weeks, depending on usage). An optical saturation indicator may signal when cleaning is due.
- To remove the filters, locate the release latch (as shown in Image 3) and pull it down.
- Carefully slide the filter out.
- Wash the filters by hand in hot water with a mild detergent, or in a dishwasher on a low-temperature cycle. Avoid using abrasive cleaners.
- Allow the filters to dry completely before reinserting them.
- Slide the dry filters back into their slots until they click into place.

Image 3: A hand demonstrating the removal of a metal grease filter from the cooker hood by pulling down a latch.
6.2. Replacing Carbon Filters (Recirculation Mode)
If your hood operates in recirculation mode (without external ducting), it uses activated carbon filters to remove odors. These filters are not washable and must be replaced periodically (typically every 3-6 months, depending on usage). Refer to the Quick Installation Guide for specific instructions on replacing carbon filters (e.g., ECFB01, ECFBLL02).
6.3. Cleaning the Exterior
Clean the exterior surfaces of the cooker hood with a soft cloth and a mild, non-abrasive detergent. For stainless steel surfaces, use a specialized stainless steel cleaner. Do not use abrasive pads or harsh chemicals.
7. Troubleshooting
Before contacting service, check the following common issues:
| Problem | Possible Cause | Solution |
|---|---|---|
| Hood does not turn on. | No power supply. | Check if the appliance is plugged in and the circuit breaker is on. |
| Poor extraction performance. | Grease filters are dirty or carbon filters are saturated. | Clean metal grease filters or replace carbon filters. Ensure proper ventilation in the kitchen. |
| Lights are not working. | LED lights are faulty. | Contact qualified service personnel for LED replacement. |
| Excessive noise during operation. | Improper installation or foreign objects in the fan. | Ensure the hood is securely mounted. Check for any obstructions in the fan or ducting. |
8. Specifications
Technical data for the AEG DGE5861HM Cooker Hood:
- Model: DGE5861HM
- Mounting Type: Under Cabinet Mount
- Material: Stainless Steel
- Air Flow Capacity: 580 Cubic Meters Per Hour
- Noise Level: 50 Decibels (min) - 67 Decibels (max)
- Number of Speeds: 4
- Controls Type: Touch, Remote
- Light Source Type: LED
- Filter Type: Washable Physical Grease Filter
- Ventilation Type: Exhaust (can be adapted for recirculation with optional carbon filters)
- Voltage: 220-240 V
- Annual Energy Consumption: 54.7 Kilowatt Hours
- Efficiency Class: A
- Product Dimensions: 11.81"D x 30.31"W x 12.99"H (approx. 30 x 77 x 33 cm)
- Item Weight: 2.2 pounds (approx. 1 kg)

Image 4: An illustration representing the energy efficiency class 'A' of the cooker hood, symbolized by a piggy bank.
9. Warranty and Support
For warranty information, please refer to the documentation provided with your purchase or contact your retailer. For technical support, spare parts, or service requests, please contact AEG customer service or an authorized service center. Always provide the model number (DGE5861HM) and serial number of your appliance when seeking assistance.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.







