Introduction
Thank you for choosing the WMF Lono Electric Kettle. This manual provides essential information for the safe and efficient operation, maintenance, and care of your new appliance. Please read these instructions carefully before first use and keep them for future reference.
Safety Instructions
Always observe the following safety precautions to prevent injury or damage to the appliance:
- Electrical Safety: Ensure the voltage indicated on the appliance matches your local mains voltage before connecting. Do not immerse the kettle, power base, cord, or plug in water or other liquids.
- Hot Surfaces: The kettle body, especially the interior, becomes very hot during operation. Use the handle only. The "Safety-Touch" housing under the handle is designed to remain cool, but exercise caution.
- Scalding Hazard: Always close the lid securely before boiling. Be careful when pouring hot water to avoid scalding. Steam emitted from the spout is also hot.
- Water Level: Do not fill above the maximum fill line or below the minimum fill line. Overfilling may cause boiling water to eject. Operating without sufficient water can damage the heating element.
- Placement: Place the kettle on a stable, flat, heat-resistant surface, away from edges and out of reach of children. Do not place near hot gas or electric burners, or in a heated oven.
- Children and Vulnerable Persons: This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised.
- Damage: Do not operate the kettle if the cord, plug, or appliance itself is damaged. Contact customer service for repair.
- Automatic Shut-off: The kettle features automatic shut-off when water boils, when lifted from the base, or if operated dry. Do not attempt to override these safety features.
Product Overview
The WMF Lono Electric Kettle is designed for efficient and safe water boiling. Key components and features include:
- Cromargan Stainless Steel Housing: Durable and elegant design.
- Double-Walled Construction: Provides thermal insulation, keeping the exterior cooler to the touch (Safety-Touch feature).
- 1.3 Liter Capacity: Suitable for various uses.
- 2400 Watts Power: For rapid boiling.
- Concealed Stainless Steel Heating Element: For easy cleaning and extended lifespan.
- Internal Water Level Indicator: For precise filling.
- One-Handed Lid Opening: Convenient push-button lid release.
- Removable and Washable Limescale Filter: Ensures clean water and easy maintenance.
- 360° Cordless Base: Allows the kettle to be placed from any direction.
- Safety Features: Dry-boil protection, overheat protection, automatic boiling stop, and lid locking mechanism.
Image: The WMF Lono Electric Kettle, showcasing its sleek stainless steel design, positioned on a kitchen counter with two cups of tea, indicating its use.
Image: A hand touching the side of the WMF Lono Electric Kettle, demonstrating the "Safety-Touch" feature where the exterior remains cool.
Setup
- Unpacking: Carefully remove all packaging materials and dispose of them responsibly.
- First Cleaning: Before first use, fill the kettle with water to the maximum level and boil it. Discard this water. Repeat this process two to three times to remove any manufacturing residues.
- Placement: Place the power base on a dry, flat, and stable surface. Ensure the power cord is not dangling or in contact with hot surfaces.
- Cord Storage: The power base has a cable winder for convenient storage of excess cord length.
Image: A diagram illustrating the 360-degree cordless base, indicating that the kettle can be placed on it from any angle.
Operating Instructions
- Filling the Kettle: Press the lid release button to open the lid. Fill the kettle with the desired amount of water, ensuring it is between the minimum (0.5L) and maximum (1.3L) fill lines indicated internally. Close the lid firmly until it clicks.
- Placing on Base: Place the filled kettle onto its 360° cordless power base.
- Connecting to Power: Plug the power cord into a suitable wall socket.
- Starting the Boiling Process: Press the ON/OFF switch located on the handle downwards. The indicator light will illuminate, signifying that the kettle is heating.
- Automatic Shut-off: The kettle will automatically switch off once the water has boiled. The indicator light will turn off.
- Pouring: Carefully lift the kettle from its base and pour the hot water. Always pour slowly and steadily to avoid splashing.
- Re-boiling: If the kettle has just boiled, allow a short cooling period (approx. 20-30 seconds) before re-activating the switch for another boiling cycle.
Image: A top-down view of the kettle with its lid open, revealing the stainless steel interior and the concealed heating element, ready for filling.
Image: A close-up of the illuminated power switch at the base of the kettle's handle, indicating the appliance is in operation.
Maintenance and Cleaning
Regular cleaning and maintenance will ensure the longevity and optimal performance of your kettle.
- Before Cleaning: Always unplug the kettle from the power outlet and allow it to cool completely before cleaning.
- Exterior Cleaning: Wipe the exterior of the kettle with a soft, damp cloth. Do not use abrasive cleaners or scouring pads, as these can damage the Cromargan surface.
- Interior Cleaning: The concealed heating element makes the interior easy to clean. If necessary, wipe with a soft cloth.
- Limescale Filter: The removable limescale filter should be cleaned regularly, especially in areas with hard water.
- Open the lid and carefully remove the filter from its holder near the spout.
- Rinse the filter under running water and gently brush away any limescale deposits.
- Reinsert the clean filter into its holder until it clicks into place.
- Descaling: Limescale buildup can affect performance and taste. Descale your kettle regularly (e.g., monthly, depending on water hardness). Use a commercially available descaling agent suitable for kettles, following the product's instructions. Alternatively, a solution of white vinegar and water (1:2 ratio) can be used. Boil the solution, let it stand for an hour, then rinse thoroughly several times.
- Storage: When not in use, store the kettle in a dry place. You can wrap the power cord around the winder on the base.
Image: The WMF Lono Electric Kettle with its lid open, showing the removable limescale filter detached from the spout, ready for cleaning.
Troubleshooting
If you encounter issues with your kettle, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Kettle does not heat up. |
|
|
| Water takes too long to boil. |
|
|
| Lid is difficult to open or sticks. |
|
|
| Kettle switches off before boiling. |
|
|
Specifications
- Model Number: 0413210011
- Brand: WMF
- Material: Cromargan Stainless Steel
- Color: Cromargan
- Capacity: 1.3 Liters
- Power: 2400 Watts
- Voltage: 240 Volts
- Dimensions (L x W x H): 23.4 x 14.2 x 26.2 cm
- Weight: 1.5 Kilograms
- Special Features: Automatic shut-off, Push-button lid, Double-walled, Removable filter, Anti-limescale filter, Water level indicator, Overheat protection, Dry-boil protection, Cordless.
Warranty and Support
For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official WMF website. Information regarding spare parts availability is not provided in this manual.
Manufacturer: WMF
