PicassoTiles PTR50
PicassoTiles PTR50 50-Piece Racecar Track Magnetic Tiles Instruction Manual
Model: PTR50
Introduction
Thank you for choosing the PicassoTiles PTR50 50-Piece Racecar Track Magnetic Tiles set. This educational toy is designed to promote problem-solving skills, hand-eye coordination, and fine motor development through engaging construction play. The set includes magnetic building tiles, track pieces, support pillars, ramps, and two LED light-up race cars, allowing for the creation of dynamic and multi-layered race tracks.

Image: An example of an assembled PicassoTiles racecar track with two light-up cars on it.
Important Safety Information
WARNING: THIS PRODUCT CONTAINS SMALL PARTS. Swallowed small parts can stick together across intestines causing serious infections and fatal injury. Seek immediate medical attention if small parts are swallowed or inhaled.
Always supervise children during play. Ensure all pieces are used as intended and stored safely after use. This product is suitable for ages 3 years and up.

Image: Graphic displaying safety certifications: Independently lab tested and certified, Non-Toxic, BPA-Free, Lead-Safe.
Package Contents
Your PicassoTiles PTR50 set includes 50 pieces designed for building a race track. Please verify all components are present upon opening the package:
- Magnetic Track Tiles (various shapes including straight, curved, and ramps)
- Support Pillars (16 pieces)
- Road Signs
- 2 LED Light-Up Race Cars (requires 2 x AA batteries per car, not included)

Image: The PicassoTiles PTR50 box with an illustration of the assembled track and a layout of all 50 individual pieces included in the set.
Setup Instructions
1. Assembling Track Pieces
The magnetic tiles connect easily using their built-in magnets. Simply bring the edges of two tiles together, and they will snap into place. Experiment with different tile shapes to create various track layouts.
2. Attaching Support Columns and Ramps
To build multi-level tracks, use the support columns. Push the track tile piece vertically towards the stud on the support column, aligning the holes in the corners of the track tile piece with the studs. To disassemble, push the track tile piece up and away from the support column. Do not pull apart horizontally to prevent breakage.

Image: Visual guide for correct assembly and disassembly of track tiles with support columns, highlighting what not to do to avoid damage.
3. Installing Batteries in Light-Up Cars
Each light-up race car requires 2 x AA batteries (not included). Locate the battery compartment on the underside of the car, open it, insert the batteries with correct polarity (+/-), and close the compartment securely. The cars will light up when switched on.

Image: A detailed view of one of the light-up race cars and various magnetic track pieces, showing the transparent design of the car.
Setup Video Guide
Video: Official PicassoTiles video demonstrating the assembly and features of the PTR50 Race Car Track Building Block Educational Toy Set.
Operating Instructions
Once your track is assembled and cars have batteries installed, you are ready to play. Turn on the light-up cars using their power switch. Place the cars on the track and watch them race. The magnetic tiles allow for endless track configurations, encouraging creativity and exploration.
- Creative Building: Use the various tile shapes (squares, triangles, curves, ramps) to design unique race tracks.
- Multi-Level Structures: Utilize the support pillars to create bridges, tunnels, and elevated sections for more complex designs.
- Road Signs: Incorporate the included road signs to add realism and imaginative play scenarios to your track.
- Expandability: This set is compatible with other PicassoTiles magnetic tile sets, allowing you to expand your creations and build even larger and more intricate track systems.

Image: A complex, multi-level race track built with PicassoTiles, showcasing cars navigating different elevations and turns.
Video: Official PicassoTiles video demonstrating various race track configurations and cars in action.
Maintenance
To ensure the longevity of your PicassoTiles set, follow these simple maintenance guidelines:
- Cleaning: Wipe tiles and cars with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners. Do not submerge cars in water.
- Storage: Store all pieces in a dry place away from direct sunlight and extreme temperatures. Keep small parts, especially the cars, in their designated storage areas to prevent loss.
- Battery Care: Remove batteries from the light-up cars if they will not be used for an extended period to prevent leakage.
Troubleshooting
| Problem | Solution |
|---|---|
| Light-up cars do not light up or move. |
|
| Track pieces do not connect securely. |
|
| Cars get stuck or do not run smoothly on the track. |
|
Specifications
| Feature | Detail |
|---|---|
| Brand | PicassoTiles |
| Model Name | PTR50 |
| Number of Pieces | 50 |
| Age Range Recommendation | 3 years and up |
| Material Type | Plastic |
| Educational Objective | Creative Thinking, Imagination Development, Shape Recognition, STEM, Team Building Skills |
| Power Source (Cars) | Battery Powered (2 x AA batteries per car, not included) |
| Special Features | Magnetic, Non-toxic, Easy Storage |
| Assembly Required | Yes |
| CPSIA Cautionary Statement | Contains Small Magnets |
Warranty and Support
For any questions, concerns, or support regarding your PicassoTiles PTR50 set, please contact PicassoTiles customer service. While specific warranty details are not provided in this manual, PicassoTiles is committed to customer satisfaction.
You can find more information and contact details on the official PicassoTiles website or through their Amazon store:
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.