Philips GC7920/20 Steam Generator Iron User Manual

Introduction

This manual provides essential information for the safe and efficient use of your Philips GC7920/20 Steam Generator Iron. Please read these instructions carefully before first use and retain them for future reference.

Important Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury.

• Do not leave the iron unattended while it is connected to the mains or while it is standing on the ironing board.
• Do not immerse the iron or the base unit in water or any other liquid.
• Keep the iron and its cord out of reach of children.
• Do not operate the iron if it has been dropped, if there are visible signs of damage, or if it is leaking.
• Only connect the appliance to an earthed wall socket.

Product Overview

Familiarize yourself with the components of your Philips GC7920/20 Steam Generator Iron.

Image 1: The Philips GC7920/20 Steam Generator Iron, showcasing its compact design, teal and white color scheme, and the transparent 1.5-liter water tank. The iron unit is connected to the base via a grey braided steam hose.

Setup and First Use

1. Unpacking: Carefully remove the iron from its packaging. Retain the packaging for storage or transport.
2. Positioning: Place the steam generator on a stable, level, and heat-resistant surface.
3. Filling the Water Tank:
   • Remove the detachable water tank from the base unit.
   • Fill the tank with tap water up to the 'MAX 1.5L' indication. For optimal performance and to prolong the appliance's life, Philips recommends using a mix of 50% tap water and 50% distilled water, especially in areas with hard water.
   • Reinsert the water tank into the base unit until it clicks into place.
   

   Image 2: A close-up view of the transparent 1.5-liter water tank on the Philips GC7920/20, clearly showing the 'MAX 1.5L' fill line. The tank is designed for easy removal and refilling.

4. Connecting to Power: Plug the power cord into an earthed wall socket. The power indicator light will illuminate.
5. Heating Up: The iron will begin to heat up. This typically takes a few minutes. The 'iron ready' light will stop flashing and remain steady when the iron is ready for use.

Operating Instructions

OptimalTEMP Technology

Your Philips GC7920/20 features OptimalTEMP technology, which means you do not need to adjust the temperature setting. The iron is safe to use on all ironable fabrics without the risk of burning, from denim to silk, with no temperature dial required.

Ironing with Steam

1. Ensure the water tank is filled and the iron is heated up (ready light is steady).
2. Press and hold the steam trigger located under the handle to release continuous steam. Release the trigger to stop steaming.
3. For a powerful steam boost to tackle stubborn creases, press the steam trigger twice quickly.
4. Iron your garments as usual. The SteamGlide soleplate ensures smooth gliding over fabrics.

Image 3: A detailed view of the iron's handle and the steam trigger, which is ergonomically placed for easy access during ironing. The 'PerfectCare Compact Plus' branding is visible on the iron body.

Vertical Steaming

The vertical steam function is ideal for refreshing hanging garments, curtains, or delicate fabrics.

1. Hold the iron in a vertical position, a few centimeters away from the fabric.
2. Press the steam trigger to release steam.

Automatic Shut-off

For safety and energy saving, the iron features an automatic shut-off function. If the iron is left unattended for a certain period, it will automatically switch off.

Maintenance and Cleaning

Descaling (Easy De-Calc)

Regular descaling is crucial to maintain optimal steam performance and extend the lifespan of your appliance. Your iron is equipped with an automatic anti-calc system and a calc collector.

1. When the 'DE-CALC' light flashes and the appliance beeps, it's time to descale.
2. Ensure the appliance is cool and unplugged.
3. Place the steam generator on the edge of a table or sink.
4. Unscrew the Easy De-Calc knob (usually located on the side or front of the base unit) and let the water and scale particles flow into a cup or basin.
5. Once empty, screw the Easy De-Calc knob back into place.

Cleaning the Soleplate

• To clean the SteamGlide soleplate, use a damp cloth and a non-abrasive cleaner.
• Never use abrasive scouring pads, vinegar, or other chemicals, as these can damage the soleplate.

Storage

• After use, unplug the appliance and allow it to cool down completely.
• Empty the water tank.
• Secure the iron to the base unit (if applicable) and wrap the power cord and steam hose neatly.
• Store the iron in a dry, safe place.

Troubleshooting

Technical Specifications

Warranty and Support

For warranty information, technical support, or to inquire about spare parts, please contact Philips customer service in your region. Information regarding spare parts availability was not provided in the product details.

You can typically find contact details on the official Philips website or within the product packaging.