1. Introduction
The HID Global RP10-H (Model: 900PHRNEK00466) is a versatile multi-technology access control reader designed for secure identification. This reader supports various credential technologies including PIVCLS, SE E, and operates with HF (High Frequency) standards, SIO, SEOS, and FIPS compliance. It is engineered for robust performance in access control systems, providing reliable authentication for authorized personnel. This manual provides essential information for the proper installation, operation, and maintenance of your RP10-H reader.
Image Description: The image above displays the HID Global logo, which features the word "HID" in bold white capital letters against a solid blue rectangular background with rounded corners. A small registered trademark symbol (®) is visible in the upper right corner of the blue rectangle.
2. Setup and Installation
Proper installation is crucial for the optimal performance of the RP10-H reader. It is recommended that installation be performed by qualified personnel.
2.1. Package Contents
- HID Global RP10-H Reader (Model: 900PHRNEK00466)
- Mounting Hardware (screws, anchors)
- Installation Guide (this document)
2.2. Mounting Instructions
- Choose a suitable mounting location, ensuring it is flat and free from obstructions.
- Use the provided mounting template (if applicable) to mark drilling points.
- Drill pilot holes for the mounting screws.
- Secure the reader to the mounting surface using the provided hardware. Ensure the reader is firmly attached.
2.3. Wiring and Power Connection
The RP10-H reader requires a stable power supply and proper connection to the access control panel. Refer to the wiring diagram provided with your specific access control system for detailed connections.
- Connect the reader's power input to a regulated DC power supply (typically 5-16 VDC).
- Connect the data lines (e.g., Wiegand, OSDP) to the corresponding inputs on your access control panel.
- Ensure all connections are secure and insulated to prevent short circuits.
- Verify proper grounding to prevent electrical interference.
3. Operating the Reader
Once installed and powered, the RP10-H reader is ready for operation.
3.1. Credential Presentation
To gain access, present your compatible access credential (e.g., PIV, SEOS card, mobile credential) within close proximity to the reader's face. The optimal reading distance may vary depending on the credential type and environmental factors.
3.2. LED and Audible Indicators
The RP10-H reader provides visual and audible feedback to indicate its status and the outcome of a credential presentation.
| Indicator | Description |
|---|---|
| Green LED | Indicates successful credential read and access granted. |
| Red LED | Indicates credential read error or access denied. |
| Amber/Yellow LED | Indicates reader busy or awaiting input. |
| Single Beep | Successful credential read. |
| Multiple Beeps | Error during credential read or access denied. |
4. Maintenance
The HID Global RP10-H reader is designed for minimal maintenance.
- Cleaning: Periodically wipe the reader's surface with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Firmware Updates: Firmware updates may be available from HID Global to enhance performance or add new features. Consult your system administrator or HID Global support for information on applying updates.
- Inspection: Regularly inspect the reader and its wiring for any signs of damage or wear.
5. Troubleshooting
If you encounter issues with your RP10-H reader, refer to the following common troubleshooting steps.
| Problem | Possible Cause | Solution |
|---|---|---|
| Reader is unresponsive (no LEDs, no sound). | No power or incorrect wiring. |
|
| Credential not reading or access denied (Red LED/multiple beeps). |
|
|
| Intermittent reading. |
|
|
For issues not resolved by these steps, please contact HID Global technical support or your system integrator.
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | 900PHRNEK00466 |
| Brand | HID Global |
| Supported Technologies | PIVCLS, SE E, HF STD/SIO/SEOS/FIPS |
| Color | Black (BLK) |
| Interface | Wiegand (WG) |
| Package Dimensions | 8 x 8 x 8 inches |
| Item Weight | 1 pounds |
| ASIN | B07N5872JC |
| Date First Available | September 4, 2019 |
7. Warranty and Support
For information regarding the product warranty, please refer to the warranty documentation provided with your purchase or visit the official HID Global website.
For technical support, product inquiries, or further assistance, please contact HID Global customer service or your authorized distributor.
- HID Global Official Website: www.hidglobal.com
- Technical Support: Refer to the support section on the HID Global website for contact details specific to your region.
