Introduction
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Makita DLS713NZ 18V Li-Ion LXT 190mm Slide Compound Mitre Saw. Please read this manual thoroughly before using the tool to ensure proper handling and to maximize its performance and lifespan.
The Makita DLS713NZ is a cordless mitre saw designed for precision cutting tasks. It is powered by an 18V Li-ion LXT slide-type battery (not included) and delivers up to 2,200 RPM. Key features include a 4-steel rail sliding system, versatile mitre and bevel adjustments, and a large aluminum base for stable support of workpieces.
General Safety Instructions
WARNING: Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.
Work Area Safety
- Keep work area clean and well lit. Cluttered or dark areas invite accidents.
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
- Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
Electrical Safety
- Power tool plugs must match the outlet. Never modify the plug in any way.
- Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
Personal Safety
- Always wear eye protection. Use safety glasses, goggles, or a face shield.
- Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts.
- Use appropriate personal protective equipment (PPE) such as dust masks, non-skid safety shoes, hard hats, or hearing protection.
Product Overview
The Makita DLS713NZ is a robust slide compound mitre saw designed for precision and durability. Familiarize yourself with its main components before operation.
Figure 1: Overall view of the Makita DLS713NZ Slide Compound Mitre Saw. This image shows the saw's main body, blade guard, sliding rails, base, and dust bag attachment.
Key Components:
- Blade Guard: Protects the user from the rotating blade.
- Sliding Rails: Allow the saw head to move forward and backward for wider cuts.
- Mitre Scale and Lock: For setting and securing the horizontal cutting angle.
- Bevel Scale and Lock: For setting and securing the vertical cutting angle.
- Workpiece Supports: Extendable supports on both sides of the base for longer materials.
- Dust Bag: Collects sawdust during operation.
- Electric Brake: Quickly stops the blade rotation after the trigger is released.
Setup
Unpacking and Assembly
- Carefully remove the saw and all accessories from the packaging.
- Inspect the tool for any damage that may have occurred during shipping. Do not operate a damaged tool.
- Ensure all included components are present: 1 x Makita DLS713NZ, 1 x TCT saw blade, 1 x Dust Bag.
Battery Installation
This tool requires an 18V Li-ion LXT slide-type battery (not included). Ensure the battery is fully charged before use.
- Align the battery pack with the battery housing on the saw.
- Slide the battery into the housing until it clicks into place.
- To remove, press the release button on the battery pack and slide it out.
Figure 2: The Makita DLS713NZ mitre saw with an 18V LXT battery installed, ready for operation. This image highlights the battery's position on the tool.
Blade Installation
Always disconnect the battery before performing any assembly or adjustment tasks.
- Lift the lower blade guard.
- Loosen the hex bolt holding the blade clamp.
- Place the TCT saw blade onto the spindle, ensuring the teeth are pointing in the correct direction (usually indicated by an arrow on the blade and saw).
- Secure the blade clamp and tighten the hex bolt firmly.
Operating Instructions
Basic Operation
- Ensure the workpiece is securely clamped to the saw base.
- Hold the handle firmly and depress the trigger to start the saw.
- Allow the blade to reach full speed before beginning the cut.
- Slowly lower the blade through the workpiece. For slide cuts, push the saw head forward through the material.
- Once the cut is complete, release the trigger and allow the blade to stop completely before raising the saw head.
Figure 3: The Makita DLS713NZ in action, demonstrating a precise cut on a wooden workpiece. This image shows the saw's sliding mechanism in use.
Adjusting Mitre Angles
The saw can be adjusted for mitre cuts from 0 to 47 degrees left and 0 to 57 degrees right, with positive stops at 9 common settings.
- Loosen the mitre lock handle.
- Rotate the turntable to the desired angle on the mitre scale.
- Tighten the mitre lock handle to secure the position.
Adjusting Bevel Angles
Bevel cuts can be made from 0 to 45 degrees left and 0 to 5 degrees right.
- Loosen the bevel lock knob.
- Tilt the saw head to the desired angle on the bevel scale.
- Tighten the bevel lock knob to secure the position.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your mitre saw. Always disconnect the battery before performing any maintenance.
Cleaning
- After each use, clean the saw thoroughly to remove sawdust and debris. Use a brush or compressed air.
- Pay special attention to the blade guard, sliding rails, and motor vents to prevent buildup.
- Empty the dust bag regularly.
Blade Care
- Inspect the saw blade for sharpness and damage before each use. A dull or damaged blade can cause kickback and poor cut quality.
- Replace worn or damaged blades immediately with a blade of the correct size (190mm) and type.
Lubrication
- Periodically apply a light coat of machine oil to the sliding rails to ensure smooth operation.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Saw does not start | Battery not installed correctly or discharged. | Ensure battery is fully inserted and charged. |
| Blade not cutting smoothly / burning wood | Dull or damaged blade. Incorrect blade for material. | Replace blade. Use appropriate blade for the workpiece. |
| Excessive vibration | Loose blade. Damaged blade. Unstable workpiece. | Check blade tightness. Replace damaged blade. Secure workpiece firmly. |
| Sawdust buildup | Dust bag full or clogged. | Empty and clean dust bag. Clear any blockages in the dust port. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | DLS713NZ |
| Power Source | Battery Powered (18V Li-ion LXT) |
| No Load Speed | 1900 RPM |
| Blade Diameter | 190 mm |
| Mitre Range | 0° - 47° Left, 0° - 57° Right |
| Bevel Range | 0° - 45° Left, 0° - 5° Right |
| Item Weight | 14.3 Kilograms (31.5 pounds) |
| Product Dimensions | 10.15"L x 6.67"W x 7.04"H |
| Included Components | 1 x Makita DLS713NZ, 1 x TCT saw blade, Bag |
| Surface Recommendation | Wood |
| Special Feature | Electric Brake, Double Sliding Mechanism |
Warranty and Support
Warranty Information
Your Makita DLS713NZ comes with a 1-year manufacturer warranty. This warranty can be extended by a further 2 years (total 3 years) when registered within 30 days of purchase. Please note that this guarantee does not apply where non-genuine or non-recommended parts or accessories are fitted to the tool. The use of non-genuine or compatible batteries and chargers with Makita Tools will invalidate the Makita guarantee for our tools.
Customer Support
For technical assistance, service, or warranty claims, please contact Makita customer support. You can find more information and contact details on the official Makita website or by visiting the Makita Store on Amazon.
