KING KOP4800 One Pro Premium Satellite TV Antenna

Introduction

The KING KOP4800 One Pro Premium Satellite TV Antenna is designed to provide automatic satellite television reception for recreational vehicles, trucks, campers, and other mobile applications. This antenna is compatible with DIRECTV (SD only), DISH, and Bell (Canada) satellite services. It features automatic configuration for U.S. satellite services without manual DIP switch adjustments, ensuring ease of use. The KING One Pro is built for maximum signal strength and supports multiple TV viewing.

Safety Information

• Electrical Safety: Ensure all power connections are secure and meet specified voltage requirements. Use only the provided power inserter and power supply.
• Mounting: If roof-mounting, ensure the antenna is securely fastened to a stable surface according to local regulations and manufacturer guidelines. Avoid mounting near power lines or other obstructions.
• Environmental Conditions: Do not operate the antenna in severe weather conditions such as heavy lightning storms.
• Cable Management: Route all cables safely to prevent tripping hazards or damage.

What's in the Box

Verify that all components are present before beginning installation:

• KING One Pro Antenna
• 50 feet of RG6 coax cable
• Quick Start Guide
• Manual (this document)
• Power Inserter
• Power Supply (requires 110VAC)

Setup

The KING KOP4800 antenna can be used as a portable unit or permanently roof-mounted. Ensure a clear line of sight to the southern sky for optimal satellite reception.

1. Placement and Mounting

Portable Use: Place the antenna on a stable, level surface with an unobstructed view of the sky. The integrated handle allows for easy transport.

Roof-Mount Installation: For permanent installation, secure the antenna to the roof of your RV or vehicle. No additional foot kit is required for roof mounting. Refer to the separate Installation Manual (PDF) for detailed roof-mount instructions.

Image: The KING KOP4800 One Pro Premium Satellite TV Antenna, showing its compact design and clear dome.

2. Connecting the Components

1. Connect Antenna to Power Inserter: Use one end of the provided RG6 coax cable to connect the antenna's 'ANTENNA' port to the 'ANTENNA' port on the power inserter.
2. Connect Power Inserter to Receiver: Use the other end of the RG6 coax cable to connect the 'RECEIVER' port on the power inserter to the 'SATELLITE IN' port on your compatible satellite receiver.
3. Connect Power Supply: Plug the power supply into the power inserter, then plug the power supply into a 110VAC outlet.
4. Connect Receiver to TV: Connect your satellite receiver to your television using an HDMI cable or other appropriate video/audio cables (not included).

Image: Close-up view of the satellite TV antenna's connection ports, illustrating where cables are attached.

Important: A compatible satellite receiver (sold separately) is required for operation. The receiver, power inserter, and TV will require a 110-volt AC power source (e.g., power inverter, portable generator, or power pack).

Operation

Once all connections are made and power is supplied, the KING KOP4800 will automatically begin searching for satellite signals.

1. Power On: Turn on your satellite receiver and television.
2. Automatic Satellite Acquisition: The KING One Pro will automatically configure itself for U.S. satellite service and begin searching for the appropriate satellite signal. This process typically takes a few minutes. The clear dome allows you to observe the antenna's movement during acquisition.
3. Provider Compatibility: The antenna works with DIRECTV (SD only), DISH, or Bell (Canada). Ensure your receiver is activated with your chosen service provider.
4. Multiple TV Viewing: The KING One Pro supports multiple TV viewing, allowing you to connect additional receivers (with appropriate splitters, not included) to watch different programming on multiple televisions.

Image: The clear dome of the satellite antenna, allowing visibility of the internal dish as it searches for satellites.

Note: This antenna does not provide service while in motion. It is designed for stationary use.

Maintenance

• Cleaning: Periodically clean the exterior of the antenna with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Inspection: Regularly inspect the coax cables for any signs of wear, cuts, or damage. Ensure all connections are tight and free from corrosion.
• Storage: When not in use for extended periods, store the antenna in a dry, protected area.

Troubleshooting

If you experience issues with your KING KOP4800 antenna, try the following steps:

• No Signal:
  • Ensure the antenna has a clear, unobstructed view of the southern sky. Trees, buildings, or other vehicles can block the signal.
  • Verify all cable connections are secure between the antenna, power inserter, and receiver.
  • Confirm the power inserter and receiver are receiving power.
  • Cycle the power to the receiver and antenna by unplugging and replugging the power supply.
• Partial Channels or Pixelation:
  • This may indicate a weak signal. Re-check antenna placement for obstructions.
  • Ensure your satellite receiver is correctly configured for your service provider.
• Antenna Not Moving/Searching:
  • Check all power connections. The antenna requires power through the coax cable from the power inserter.
  • Ensure the coax cable is not damaged.

For more detailed troubleshooting or persistent issues, refer to the official KING support resources.

Specifications

Warranty

The KING KOP4800 One Pro Premium Satellite TV Antenna comes with a 2 Years Parts and Labor warranty. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty documentation included with your product or contact KING customer support.

Support

For further assistance, technical support, or warranty inquiries, please contact KING customer service. Refer to the Quick Start Guide or the manufacturer's website for current contact information.