CalExotics Eclipse Thrusting Rotator Probe Instruction Manual

Introduction

Thank you for choosing the CalExotics Eclipse Thrusting Rotator Probe. This manual provides essential information for the safe and effective use, care, and maintenance of your device. Please read it thoroughly before first use and retain it for future reference.

Safety Information

• This product is intended for adult use as a non-medical pleasure device only. It is not for medical use.
• Discontinue use immediately in the event of any medical condition, pain, or discomfort. Consult a healthcare professional if irritation occurs.
• Keep out of reach of children.
• Do not use if the product appears damaged or defective.
• Clean the device thoroughly before and after each use as instructed in the "Care and Maintenance" section.
• Use with water-based lubricants only. Oil-based lubricants may damage the silicone material.
• The device is designed to be waterproof and may be used in or out of water. However, ensure the charging port is completely dry before charging.

Product Features

The CalExotics Eclipse Thrusting Rotator Probe is designed with advanced features for enhanced experience:

• Premium silicone construction.
• Dual motors providing 12 functions of vibration, pulsation, and escalation.
• Synchronous thrusting and rotating shaft for dynamic stimulation.
• Memory chip function that resumes on the last used setting.
• Security travel lock feature: press and hold the power button for 3 seconds to activate or deactivate.
• USB rechargeable for convenience.

Image: Front view of the CalExotics Eclipse Thrusting Rotator Probe, highlighting its dimensions (3.75 inches / 9.5 cm length, 1.25 inches / 3.25 cm width) and key features like intense vibration with synchronous thrusting and rotating shaft, textured surface, and easy-to-use 12 functions button.

Getting Started

Charging the Device

Before first use, fully charge your device. The Eclipse Thrusting Rotator Probe is USB rechargeable.

1. Locate the charging port on the device.
2. Connect the included USB charging cable to the device and to a USB power source (e.g., computer, USB wall adapter).
3. The LED light will flash while charging. It will glow solid when fully charged.
4. A complete charge takes approximately 1.5 hours.
5. Once fully charged, the device runs for approximately 45 minutes on high speed and 60 minutes on low speed.

Image: The CalExotics Eclipse Thrusting Rotator Probe connected via its USB charging cable to a laptop, illustrating the charging process.

Operation

The Eclipse Thrusting Rotator Probe features an easy-to-use single button control.

1. Power On/Off: Press and hold the power button for 3 seconds to turn the device on or off.
2. Cycle Functions: Once powered on, short press the power button to cycle through the 12 different vibration, pulsation, and escalation functions.
3. Memory Chip: The device includes a memory chip that will resume on the last function used when powered on again.
4. Travel Lock: To activate or deactivate the security travel lock, press and hold the power button for 3 seconds. This prevents accidental activation during travel or storage.

Care and Maintenance

Proper care ensures the longevity and hygiene of your device.

• Cleaning: Clean the device thoroughly before and after each use. Wash with warm water and a mild soap or a specialized toy cleaner. Rinse thoroughly and pat dry with a lint-free cloth.
• Lubrication: Always use a water-based lubricant with this device. Oil-based lubricants can degrade the silicone material over time.
• Storage: Store the device in a clean, dry place away from direct sunlight and extreme temperatures. Keep it separate from other toys made of different materials to prevent material degradation.
• Charging Port: Ensure the charging port is completely dry before connecting the charging cable to prevent damage.

Image: The back of the product packaging, providing additional details on features, charging times, and care instructions, including its waterproof nature and hygienic silicone material.

Troubleshooting

• Device not turning on: Ensure the device is fully charged. If the battery is depleted, it may take a few minutes of charging before the device responds. Check if the travel lock is activated (press and hold for 3 seconds to deactivate).
• Weak or inconsistent vibrations: The battery may be low. Recharge the device fully.
• Charging indicator not working: Ensure the USB cable is securely connected to both the device and the power source. Try a different USB port or power adapter.
• Unusual noise or smell: Discontinue use immediately and contact customer support.

Specifications

Warranty and Support

The CalExotics Eclipse Thrusting Rotator Probe comes with a 1-year limited manufacturer warranty.

For warranty claims, technical support, or any questions regarding your product, please contact CalExotics customer service. Refer to the product packaging or the official CalExotics website for contact information.