1. Introduction
This manual provides detailed instructions for the safe and effective use of your CalExotics Optimum Series Advanced Automatic Smart Pump, model SE-1035-60-3. Please read this manual thoroughly before first use and retain it for future reference. This device is designed for personal use to provide automatic suction with customizable exercise modes.
Image 1.1: The CalExotics Optimum Series Advanced Automatic Smart Pump and its retail packaging.
2. Setup
2.1 Unpacking and Inspection
Carefully remove all components from the packaging. Inspect the device for any signs of damage. If any damage is observed, do not use the product and contact customer support.
2.2 Charging the Device
The pump is USB rechargeable. Before initial use, fully charge the device. A complete charge typically takes 2 hours and provides approximately 12 hours of run time.
- Locate the USB charging port on the pump unit.
- Connect the included USB charging cord to the pump and a compatible USB power source (e.g., computer USB port, USB wall adapter).
- The LCD screen will indicate charging status. Ensure the device is fully charged before proceeding.
Image 2.1: The USB charging port located on the pump unit.
Image 2.2: The USB charging cable provided with the device.
2.3 Assembly
The device includes a clear cylinder and a removable ridged stroker sleeve. Ensure these components are correctly assembled before use.
- Insert the ridged stroker sleeve into the clear cylinder.
- Attach the pump unit securely to the top of the cylinder.
- Ensure all connections are firm to prevent air leakage during operation.
Image 2.3: Disassembled components of the pump, including the main unit, cylinder, and stroker sleeve.
Image 2.4: Detailed view of the ridged stroker sleeve.
3. Operating Instructions
3.1 Power On/Off and Travel Lock
To power on or off the device, press and hold the power button for 3 seconds. This also functions as a travel lock to prevent accidental activation.
3.2 LCD Screen Overview
The integrated LCD screen displays important information during operation:
- Battery Life Indicator: Shows the remaining battery charge.
- Pressure: Displays the current vacuum pressure in kPa.
- Mode: Indicates the active operating mode (e.g., manual, custom program).
- Workout Time: Tracks the duration of the current session.
Image 3.1: The pump unit displaying the LCD screen and overall dimensions.
3.3 Customizable Exercise Modes
The device offers fully customizable exercise modes, allowing you to set your desired pressure and duration for sessions up to 20 minutes.
- After powering on, use the mode selection buttons to navigate through available programs or to enter custom settings.
- Adjust the pressure level using the designated control buttons.
- Set the desired duration for your session.
- Start the program. The pump will automatically maintain the set pressure and duration.
3.4 Manual Pumping
For manual control, select the manual pumping mode. This allows you to control the suction manually without a pre-set program.
3.5 Quick Air Release Button
A quick air release button is provided for immediate pressure release. Press this button to instantly equalize the pressure within the cylinder.
4. Maintenance
4.1 Cleaning
Regular cleaning is essential for hygiene and longevity of the device.
- Disconnect the pump unit from the cylinder and remove the stroker sleeve.
- Wash the cylinder and stroker sleeve with warm water and a mild, toy-safe soap.
- Rinse thoroughly to remove all soap residue.
- Wipe the main pump unit with a damp cloth. Do not submerge the pump unit in water.
- Allow all components to air dry completely before reassembly or storage.
4.2 Storage
Store the device in a clean, dry place away from direct sunlight and extreme temperatures. Keep out of reach of children.
5. Troubleshooting
If you encounter issues with your CalExotics Optimum Series Advanced Automatic Smart Pump, refer to the following common problems and solutions:
- Device does not power on: Ensure the device is fully charged. If the issue persists, try using a different USB charging cable and power source.
- No suction or weak suction: Check that all components (cylinder, stroker sleeve, pump unit) are securely assembled and there are no visible cracks or damage. Ensure the stroker sleeve is properly seated to create an airtight seal.
- LCD screen not displaying correctly: Ensure the device is charged. If the display remains erratic, contact customer support.
- Charging issues: Verify the USB cable is fully inserted into both the device and the power source. Try a different USB port or charger.
If these steps do not resolve the issue, please contact CalExotics customer support for further assistance.
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | SE-1035-60-3 |
| Product Dimensions | 3 x 6.5 x 13.5 inches |
| Weight | 0.01 ounces (approximate) |
| Battery Type | 1 Lithium Polymer battery (included) |
| Charging Time | Approximately 2 hours for a full charge |
| Run Time | Up to 12 hours on a full charge |
| Material | Polystyrene, ABS Plastic Metallic Plating, Thermoplastic Elastomer, Thermoplastic Rubber |
| Display | LCD Screen (Battery Life, Pressure, Mode, Workout Time) |
| Features | Automatic Suction, Customizable Modes, Quick Air Release, USB Rechargeable |
7. Warranty & Support
7.1 Manufacturer Warranty
This CalExotics product is backed by a 1-year manufacturer warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or neglect.
7.2 Customer Support
For warranty claims, technical assistance, or any questions regarding your CalExotics Optimum Series Advanced Automatic Smart Pump, please contact CalExotics customer support directly. Refer to the product packaging or the official CalExotics website for current contact information.