Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your kicteck Video Camera Camcorder. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize your user experience. This camcorder is designed for amateur use, offering Full HD 1080P video recording and 24MP still image capture with a 3.0-inch rotatable LCD screen.
What's in the Box
Verify that all items listed below are included in your package:
- 1 x Digital Video Camera
- 1 x USB Charger
- 1 x AV & USB Cable
- 1 x Dust Bag
- 1 x User Manual (this document)
- 2 x Rechargeable Batteries (NP-FV5)
Figure 1: Package Contents. Ensure all listed items are present.
Product Overview
Familiarize yourself with the main components and controls of your camcorder:
Figure 2: Camcorder Components. Key parts include the lens, fill light, 3.0-inch screen, USB/AV connector, menu, zoom, photo, mode, power, and battery compartment.
Setup
1. Battery Installation
- Open the LCD screen to access the battery compartment.
- Insert one of the provided NP-FV5 batteries into the compartment, ensuring correct polarity.
- Close the battery compartment cover securely.
Figure 3: Battery and SD Card Slot. The battery is inserted into the designated slot at the bottom of the camcorder.
2. SD Card Installation
- Locate the SD card slot, typically near the battery compartment.
- Insert a compatible SD memory card (4GB up to 128GB, not included) into the slot until it clicks into place.
- Important: Format the SD card through the camcorder's menu before first use to ensure compatibility and prevent system malfunction.
3. Initial Charging
Connect the camcorder to the USB charger using the provided USB cable. The charging indicator light will illuminate. A full charge typically takes several hours. The camcorder supports recording while charging, allowing for extended use without interruption.
Figure 4: Recording While Charging. The camcorder can be powered via USB while actively recording.
Operating Instructions
1. Power On/Off
Open the LCD screen to power on the camcorder. Close the LCD screen to power off the camcorder.
2. Video Recording
- Ensure the camcorder is in video mode (check the mode button).
- Press the Record button to start recording. Press it again to stop.
- The camcorder supports FHD 1920x1080 (15FPS) and HD 1280x720 (30FPS) video resolutions.
- Use the zoom toggle (W/T) to digitally zoom in or out (16X digital zoom). Note: Optical zoom is not supported.
- The pause function allows you to temporarily stop recording and resume in the same file without creating a new one.
3. Photo Capture
- Switch the camcorder to photo mode using the Mode button.
- Press the Photo button to capture a still image.
- The camcorder supports up to 24MP JPEG image resolution.
4. Webcam Function
To use the camcorder as a webcam:
- Connect the camcorder to your computer using the USB cable.
- On the camcorder screen, select "PC CAM" mode.
- Download and install the AMCAP software on your computer (if not already present).
- Open AMCAP or your preferred video conferencing application to use the camcorder as a webcam.
Figure 5: Webcam Function. The camcorder can be used for video calls and streaming when connected to a computer.
5. TV Output
Connect the camcorder to a television using the provided AV cable to view your recordings directly on a larger screen. Select the appropriate input source on your TV (NTSC/PAL compatible).
Maintenance
- Cleaning: Use a soft, dry cloth to clean the camcorder body. For the lens, use a specialized lens cleaning cloth and solution. Avoid harsh chemicals.
- Storage: When not in use, store the camcorder in the provided dust bag in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: Fully charge batteries before long-term storage and recharge them every few months to maintain battery health.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Camcorder does not power on. | Low or no battery charge; incorrectly inserted battery. | Charge the battery; ensure battery is inserted correctly. |
| Cannot record video/take photos. | No SD card; SD card full or not formatted; incorrect mode. | Insert SD card; delete files or use new card; format SD card; switch to correct mode. |
| Poor video/image quality. | Low light conditions; dirty lens; incorrect resolution settings. | Ensure adequate lighting; clean the lens; set to FHD 1080P or 24MP. |
| Zoom function not working. | Digital zoom limit reached; physical damage. | Ensure you are within the 16X digital zoom range; contact support if physically damaged. |
Specifications
| Feature | Detail |
|---|---|
| Image Resolution | Max 24M (6000x4500) |
| Video Resolution | FHD 1920x1080 (15FPS), HD 1280x720 (30FPS), 640x480 (30FPS) |
| File Format | Image: JPEG, Video: AVI |
| Image Sensor | CMOS, Max 24.0 Mega Pixels |
| Display Screen | 3.0 inch TFT LCD (16:9), 270° rotation |
| Digital Zoom | 16X (No optical zoom) |
| Battery | 3.7V 1500mAh Li-ion (Model: NP-FV5) |
| Storage Media | SD memory card and MMC card, 4GB up to 128GB (Not included) |
| Connectivity | USB 2.0 (MSDC & PC CAM), TV Output (NTSC/PAL) |
| Special Features | Built-in fill light, Anti-shaking, Face Capture, Beauty Function, Self-timer, Pause function |
| Dimensions | 5.2 x 2 x 2.3 inches |
| Weight | 1.16 pounds |
Warranty and Support
For warranty information or technical support, please refer to the contact details provided on the product packaging or the official kicteck website. Keep your purchase receipt as proof of purchase for any warranty claims.
