EXLENE Gamecube Controller Switch Instruction Manual

1. Introduction

Thank you for choosing the EXLENE Gamecube Controller Switch. This wireless controller is designed to provide a familiar GameCube-style experience with modern features, compatible with Nintendo Switch, Switch Lite, PC, iOS, Android, and Steam. It offers a full button layout, motion controls, adjustable vibration, and turbo functions for an enhanced gaming experience.

Figure 1.1: Front view of the EXLENE Gamecube Controller Switch.

2. Setup and Connection

2.1 Initial Pairing with Nintendo Switch/Lite

The controller supports one-button wake-up for the Switch system. Follow these steps to pair your controller:

1. Ensure your Nintendo Switch or Switch Lite console is powered on.
2. On the controller, press and hold the Home button (located in the center) for a few seconds until the indicator lights begin to flash rapidly.
3. On your Switch console, navigate to the 'Controllers' menu, then select 'Change Grip/Order'.
4. The console will search for available controllers. Once the EXLENE controller is detected and paired, the corresponding player indicator light on the controller will become solid.

Figure 2.1: One-button wake-up feature for Nintendo Switch/Lite.

2.2 PC/Android/iOS/Steam Connection

For PC, Android, iOS, and Steam, the controller connects via Bluetooth. A Bluetooth dongle may be required for PC (not included). Simply enable Bluetooth on your device, put the controller into pairing mode (usually by holding the Home button), and select the controller from your device's Bluetooth settings.

Figure 2.2: The controller can be connected to a PC using a Bluetooth adapter.

2.3 Charging the Controller

The controller has a built-in 480mAh Lithium Ion battery. Use the included USB-C cable to charge the controller. Connect the USB-C end to the controller's port and the other end to a USB power source (e.g., console, PC, wall adapter). The indicator lights will show charging status.

Figure 2.3: USB-C charging port and battery capacity.

3. Operating Instructions

3.1 Basic Controls

The controller features a full button layout similar to a modern Switch Pro controller, including A, B, X, Y buttons, a D-pad, left and right analog joysticks, L/R shoulder buttons, and ZL/ZR triggers. It also includes Home, Capture, and +/- buttons.

Figure 3.1: Front view highlighting the button layout.

3.2 Turbo and Auto Turbo Function

The turbo function allows for rapid, repeated button presses. To activate:

• Turbo Mode: Hold the 'T' button and press any action button (A/B/X/Y/L/R/ZL/ZR). The selected button will now rapidly repeat when held down.
• Auto Turbo Mode: To enable auto turbo, repeat the above step (hold 'T' and press the same action button again). The button will now automatically repeat without needing to be held.
• Disable Turbo: To disable turbo for a specific button, repeat the process a third time.

You can also adjust the turbo speed (20s/s, 12s/s, 5s/s) by holding the 'T' button and pressing the '+' or '-' button.

Figure 3.2: Illustration of Turbo and Auto Turbo functionality.

3.3 Adjustable Rumble (Vibration)

The controller features dual motors for adjustable vibration feedback. To change the rumble intensity:

• Hold the 'T' button and press the '+' button to increase vibration strength.
• Hold the 'T' button and press the '-' button to decrease vibration strength.

There are five levels of vibration intensity to choose from.

Figure 3.3: Dual motor shock and adjustable vibration settings.

3.4 Gyro Functionality

Equipped with a six-axis gyro sensor, the controller provides precise direction control and immersive motion sensing for compatible games.

Figure 3.4: The 6-axis gyro sensor enables motion control.

3.5 A,B,X,Y Button Swapping

To avoid button confusion when playing PC games, you can swap the bindings of the A, B, X, and Y buttons to match typical Xbox controller layouts. Hold down A, X, B, and Y buttons simultaneously to toggle this feature.

Figure 3.5: A,B,X,Y button swapping for PC compatibility.

3.6 Screenshot Functionality

Capture and save screenshots of your gameplay by pressing the dedicated screenshot button on the controller.

Figure 3.6: Dedicated screenshot button for capturing gameplay moments.

3.7 Multi-Platform Compatibility

This controller is highly versatile, supporting a wide range of platforms including Nintendo Switch, Switch Lite, PC, iOS, Android, and Steam, allowing you to use one controller for multiple gaming setups.

Figure 3.7: Multi-platform compatibility of the controller.

4. Maintenance

Proper maintenance ensures the longevity and optimal performance of your controller.

• Cleaning: Use a soft, dry cloth to wipe down the controller regularly. For stubborn dirt, slightly dampen the cloth with water or a mild electronic cleaner. Avoid excessive moisture and harsh chemicals.
• Storage: Store the controller in a cool, dry place away from direct sunlight, extreme temperatures, and humidity. Keep it protected from dust and physical impact when not in use.
• Battery Care: To prolong battery life, avoid fully discharging the controller frequently. Charge it regularly, even if not in constant use. Do not expose the battery to extreme heat or cold.

5. Troubleshooting

If you encounter issues with your EXLENE Gamecube Controller, try the following troubleshooting steps:

• Controller Not Connecting/Pairing:
  • Ensure the controller is fully charged.
  • Verify Bluetooth is enabled on your device (Switch, PC, etc.).
  • Try re-pairing the controller by following the steps in Section 2.1.
  • If connecting to PC, ensure your Bluetooth dongle is properly installed and drivers are up to date.
• Input Lag or Disconnections:
  • Ensure there are no strong electromagnetic interferences nearby (e.g., Wi-Fi routers, other wireless devices).
  • Move closer to the console/device to reduce signal interference.
  • Ensure the controller's firmware is up to date (check manufacturer's website for updates).
• Joystick Drift or Inaccurate Input:
  • Perform a controller calibration through your console's system settings (e.g., Nintendo Switch System Settings > Controllers and Sensors > Calibrate Control Sticks).
  • Clean around the base of the joysticks with compressed air to remove any debris.
• Triggers Feeling Mushy or Sticking:
  • This can sometimes occur with new controllers. Repeated use may help.
  • Ensure no foreign objects are lodged in the trigger mechanism.
• Vibration Not Working or Too Weak/Strong:
  • Check the adjustable rumble settings as described in Section 3.3.
  • Ensure the game you are playing supports vibration feedback.

6. Specifications

7. Warranty and Support

EXLENE products are manufactured with high-quality standards. For information regarding warranty coverage and terms, please refer to the warranty card included with your product or visit the official EXLENE website.

For technical support, troubleshooting assistance, or any inquiries, please contact EXLENE customer service through their official channels. Contact details can typically be found on the product packaging or the manufacturer's website.