BLACK+DECKER VM1680 Vacuum Cleaner Instruction Manual

1. Important Safety Instructions

Please read and understand all safety instructions before using your BLACK+DECKER VM1680 vacuum cleaner. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

Intended Use

Your BLACK+DECKER VM1680, VM1880, VM2080 vacuum cleaners have been designed for dry vacuum cleaning purposes. These appliances are intended for consumer indoor use only.

These appliances are not to be used in:

• Staff kitchen areas in shops, offices and other working environments;
• Farm Houses;
• By clients in hotels, motels and other residential type environments;
• Bed and breakfast type environments or any other non-household type environments.

Using Your Appliance

• Make sure that the appliance is switched off before connecting to or disconnecting from the power supply.
• Always take care when using the appliance.
• Do not use the appliance outdoors.
• Never pull the power supply cord to disconnect the plug from the socket. Keep the power supply cord away from heat, oil and sharp edges.
• If the power supply cord is damaged during use, disconnect the appliance from the power supply immediately. Do not touch the power supply cord before disconnecting from the power supply.
• Disconnect the appliance from the power supply when not in use, before fitting or removing parts and before cleaning.
• Do not immerse the appliance in water.

Electrical Safety

This appliance is double insulated; therefore no earth wire is required. Always check that the power supply corresponds to the voltage on the rating plate.

Power plugs must match the outlet. Never modify the plug in any way. Unmodified plugs and matching outlets will reduce risk of electric shock.

If the supply cord is damaged, it must be replaced by the manufacturer or an authorised BLACK+DECKER Service Centre in order to avoid a hazard.

Additional Safety Instructions for Vacuum Cleaners

• Before use, always make sure that the filter or dust compartment is correctly seated.
• Do not use the appliance to pick up any materials that could catch fire.
• Do not use the appliance to pick up any materials that are burning or smoking (matches, cigarettes, hot ash, etc.).
• Do not block the vents of the appliance.
• Avoid inhaling dust when emptying the appliance or the dust bag.
• Use extra care when cleaning stairs, use caution when vacuuming at the top of stairs, near children, etc.
• When vacuuming stairs, start at the bottom & work up.
• Do not use to pick up anything burning or smoking (matches, cigarettes, hot ashes, etc).
• Do not block the vents at the back of the unit.
• Avoid inhaling dust when emptying the dust compartment.
• Always keep the brush, crevice tool and other accessories away from the body while the unit is in operation.
• Always empty the appliance outside.
• Always be aware of the position of the power cable and hose so as to avoid a tripping hazard during use.
• Do not use on animals.
• Keep the motor exhaust away from eyes and faces.
• Keep children and animals at a safe distance when using this appliance.
• Always work from bottom up when using the appliance on stairs, and keep the appliance at least a stair below your working position.
• Do not use the appliance without the suction head or another suitable accessory mounted to the tube.
• Keep your hair, clothing and gloves away from moving parts.
• Do not use damaged accessories.
• Use only BLACK+DECKER accessories.
• Do not use the appliance on animals.
• Disconnect the product from the electrical supply before emptying, cleaning or carrying out any maintenance on the appliance.

Figure 1: Important safety information and intended use guidelines.

2. Product Overview and Components

The BLACK+DECKER VM1680 is a powerful 1600W multicyclonic bagless vacuum cleaner designed for efficient dry cleaning. It features a 2.5L translucent dustbowl and a 6-stage filtration system.

Figure 2: The BLACK+DECKER VM1680 vacuum cleaner.

Package Contents

Your BLACK+DECKER VM1680 vacuum cleaner package includes the following components:

• Vacuum cleaner unit
• Flexible hose (1.5m, 360-degree swivel)
• Extension tubes (usually 2 pieces, not explicitly mentioned but implied for floor cleaning)
• Floor brush/suction head
• 2-in-1 brush (combination tool)
• Round brush
• Upholstery brush
• Power cord (5 meters)

Figure 3: Included accessories for the VM1680 vacuum cleaner.

Detailed Accessories

Figure 4: Round Brush

Figure 5: Crevice Tool

Figure 6: Upholstery Brush

3. Setup and Assembly

Follow these steps to assemble your BLACK+DECKER VM1680 vacuum cleaner before first use.

1. Attach the Hose: Insert the flexible hose into the suction inlet on the main unit until it clicks securely into place.
2. Assemble Extension Tubes (if applicable): Connect the extension tubes together, then attach them to the handle end of the flexible hose.
3. Attach Cleaning Head: Select the appropriate cleaning head (e.g., floor brush, upholstery brush, crevice tool) and firmly attach it to the end of the extension tube or directly to the hose handle.
4. Check Dustbowl and Filters: Ensure the dustbowl is correctly seated and all filters are in place before operation. Refer to the "Maintenance" section for filter placement details.
5. Power Connection: Unwind the power cord and plug it into a suitable electrical outlet. Ensure the voltage matches the appliance's rating plate.

4. Operating Instructions

Once assembled, your BLACK+DECKER VM1680 vacuum cleaner is ready for use.

1. Power On: Press the power button located on the main unit to switch on the vacuum cleaner.
2. Adjust Suction (if applicable): Some models may have a suction control slider on the hose handle. Adjust as needed for different surfaces.
3. Cleaning: Move the cleaning head slowly over the surface to be cleaned. For optimal results, use a steady, overlapping motion.
4. Using Accessories:
   • Floor Brush: Ideal for carpets and hard floors.
   • Upholstery Brush: Use for cleaning furniture, curtains, and other fabric surfaces.
   • Crevice Tool: Perfect for narrow gaps, corners, and edges.
   • Round Brush: Suitable for dusting delicate surfaces, shelves, and intricate areas.
5. Power Off: After cleaning, press the power button again to switch off the vacuum cleaner.
6. Unplug and Store: Disconnect the power cord from the outlet and retract it (if auto-retract feature is present). Store the vacuum cleaner and accessories in a dry, safe place.

5. Maintenance and Cleaning

Regular maintenance ensures optimal performance and extends the lifespan of your BLACK+DECKER VM1680 vacuum cleaner. Always disconnect the appliance from the power supply before performing any maintenance.

Emptying the Dustbowl

The VM1680 features a 2.5L translucent dustbowl. Empty it regularly, especially when the dust level reaches the MAX line, to maintain strong suction power.

1. Disconnect the vacuum cleaner from the power supply.
2. Locate the dustbowl release button/latch on the main unit.
3. Press the release button and carefully remove the dustbowl.
4. Hold the dustbowl over a waste bin and open the bottom flap to empty the contents.
5. Close the flap securely and reattach the dustbowl to the main unit until it clicks into place.

Figure 7: The 2.5L translucent dustbowl.

Cleaning the 6-Stage Filtration System

The VM1680 utilizes a multicyclonic action and a 6-stage filtration system to separate dust and debris, ensuring consistent suction. Regular cleaning of these filters is essential.

Figure 8: Diagram of the 6-stage filtration system.

The filtration system typically includes:

• Stage 1: Reticulated Cyclonic Filter Stage
• Stage 2: Internal Root Cyclone Filter
• Stage 3: Sponge Filter
• Stage 4: Fibre Mesh Filter
• Stage 5: Pre-motor Filter
• Stage 6: Exhaust HEPA 10 Filter

To clean the filters:

1. Disconnect the vacuum cleaner from the power supply.
2. Remove the dustbowl as described above.
3. Carefully remove the individual filter components from the dustbowl assembly. Refer to the exploded view for guidance.
4. Tap off loose dust from the filters over a waste bin.
5. For washable filters (e.g., sponge filter, pre-motor filter), rinse them under cold running water until the water runs clear. Do not use detergents.
6. Allow all washed filters to air dry completely for at least 24 hours before reassembling. Do not use a dryer or heat source.
7. Reassemble the dry filters in the correct order and reattach the dustbowl to the main unit.

Figure 9: Exploded view of the filter assembly.

Figure 10: Detailed view of filter components for cleaning and reassembly.

Important: Never operate the vacuum cleaner without all filters properly installed and completely dry.

Cleaning the Exterior

Wipe the exterior of the vacuum cleaner with a soft, damp cloth. Do not use abrasive cleaners or solvents.

6. Troubleshooting

If you encounter issues with your BLACK+DECKER VM1680, refer to the following common troubleshooting steps. If the problem persists, contact customer support.

7. Specifications

8. Warranty and Support

Warranty Information

This BLACK+DECKER VM1680 vacuum cleaner comes with a 6-month warranty provided by the manufacturer from the date of purchase. Please retain your purchase receipt as proof of purchase for warranty claims.

For any warranty-related issues or product feedback, please contact the manufacturer's customer care.

Customer Support

Manufacturer: Black and Decker

For customer service and support, please contact:

• Customer Care Number: 1860-425-1111
• Operating Hours: 10 AM to 5 PM, Monday to Friday (except government holidays)

Importer: Stanley Black & Decker India Private Ltd #28, Akemps, 3rd Main, 1st Cross, Ashwini Layout Koramangala Bangalore - 560047

Packer: Stanley Black & Decker India Pvt Limited, GAT NO. 135. 137 & 157. PO Mahalunge Talukha - Khed Pune 410501. India.