Product Overview
The Ironton 220-lb. Steel Service Cart is a robust and versatile unit designed for transporting tools and various items in environments such as garages, warehouses, or workshops. Its durable steel construction and enamel finish ensure longevity, while its thoughtful design facilitates ease of use and secure transport of goods.
- Heavy-duty unit ideal for moving tools and car parts.
- Features 4-inch non-marring, smooth-rolling casters (2 swivel, 2 fixed) for easy maneuvering without damaging floors.
- Equipped with two 3 1/2-inch deep shelves to securely hold cargo during transport.
- Constructed from rugged steel with a tough enamel finish for enhanced durability.
- Includes a tubular steel handle for comfortable and easy gripping.
- Each shelf supports up to 110 lbs., for a total cart capacity of 220 lbs.
- Dimensions: 31 inches (L) x 16 inches (W) x 33 1/4 inches (H).
Figure 1: The Ironton 220-Lb. Steel Service Cart, showcasing its two-tier design and sturdy construction.
Setup and Assembly
The Ironton Steel Service Cart requires some assembly upon arrival. While assembly is straightforward, it is important to follow the instructions carefully to ensure proper and safe operation.
Assembly Steps:
- Unpack all components and verify against the parts list (not provided in this manual, refer to original packaging).
- Attach the casters to the base of the cart. Ensure that the two swivel casters are placed at one end (typically the handle end) and the two fixed casters at the opposite end for optimal maneuverability.
- Securely fasten the vertical support beams to the base and the upper shelf using the provided hardware.
- Install the tubular steel handle to the designated end of the cart.
- Double-check all bolts and fasteners to ensure they are tightened securely before first use.
Figure 2: Detail of the 4-inch lockable casters and the 3.5-inch deep shelves, designed for secure transport.
Operating Instructions
The Ironton Steel Service Cart is designed for straightforward operation, providing a reliable solution for transporting heavy items.
Loading the Cart:
- Distribute weight evenly across both shelves to maintain stability.
- Do not exceed the maximum weight capacity of 110 lbs per shelf, or 220 lbs total for the cart.
- Utilize the 3 1/2-inch deep shelves to prevent items from sliding off during movement.
Moving the Cart:
- Grasp the tubular steel handle firmly.
- Push or pull the cart smoothly. The non-marring casters allow for easy movement across various floor surfaces without leaving marks.
- Engage the locks on the casters when the cart needs to remain stationary to prevent unintended movement.
Figure 3: The cart is designed for heavy loads, with a total capacity of 220 lbs, and features a durable enamel finish.
Maintenance
Regular maintenance will ensure the longevity and optimal performance of your Ironton Steel Service Cart.
- Cleaning: Wipe down the steel surfaces with a damp cloth to remove dust and debris. For stubborn grime, a mild detergent can be used, followed by thorough drying to prevent rust.
- Caster Inspection: Periodically check the casters for any signs of wear, damage, or accumulation of hair/debris that might impede smooth rolling. Clean as necessary.
- Fastener Check: Over time, vibrations from movement can loosen fasteners. Regularly inspect all bolts and nuts and tighten them as needed to maintain structural integrity.
- Storage: Store the cart in a dry environment to protect the steel and enamel finish from moisture and extreme temperatures.
Troubleshooting
This section addresses common issues you might encounter with your service cart.
| Problem | Possible Cause | Solution |
|---|---|---|
| Cart is difficult to move or casters are stiff. | Debris caught in casters; casters need lubrication; caster locks engaged. | Clean debris from casters; apply a silicone-based lubricant to caster axles; ensure caster locks are disengaged. |
| Cart feels wobbly or unstable. | Loose fasteners; uneven weight distribution. | Check and tighten all assembly bolts and nuts; redistribute items on shelves for even weight. |
| Items slide off shelves easily. | Excessive speed or sudden stops; cart overloaded. | Move the cart at a controlled pace; ensure total weight does not exceed 220 lbs. |
Specifications
- Brand: Ironton
- Model Number: 53414
- Part Number: 3297874
- Material: Steel
- Color: Black
- Item Weight: 24 pounds
- Product Dimensions: 31 x 16 x 33.25 inches (L x W x H)
- Maximum Weight Capacity: 220 Pounds (110 lbs per shelf)
- Handle Material: Steel
- Included Components: Cart (assembly required)
- Date First Available: January 15, 2019
Warranty and Support
For information regarding warranty coverage, product support, or to purchase replacement parts, please contact Ironton customer service directly or visit their official website. Specific warranty details may vary and are typically provided with the product packaging or on the manufacturer's website.
Note: This manual provides general instructions. Always refer to the specific documentation included with your product for the most accurate and up-to-date information.
