1. Product Overview
The Modway Amelia Queen Platform Bed offers a blend of chic style and contemporary charm, designed to refresh any bedroom space. This bed features a soft polyester fabric upholstery and a timeless button-tufted headboard. Its construction includes solid wood and LVL (Laminated Veneer Lumber) for durability, complemented by sturdy wood legs with non-marking caps. Reinforced center beams provide maximum stability, ensuring compatibility with memory foam, spring, latex, and hybrid mattresses. A box spring is required for proper mattress support (not included).
Figure 1: Assembled Modway Amelia Queen Platform Bed.
2. Product Features
- Tufted Headboard: Features gentle curves and button-tufted detailing, enhancing bedroom decor.
- Upholstered Frame: Covered in soft polyester fabric with foam-padded side rails and headboard for comfort.
- Sturdy Construction: Crafted with solid wood and plywood for a stable and durable bed frame.
- Slatted Support System: Includes durable wood slats designed to support a box spring and various mattress types.
- High Weight Capacity: Supports up to 800 lbs.
3. Components List
Before assembly, ensure all components are present and undamaged. Unpack all parts from the headboard compartment.
- Headboard (1)
- Side Rails (2)
- Footboard (1)
- Support Legs (various sizes, quantity may vary)
- Wood Slats (multiple)
- Hardware Pack (bolts, washers, nuts, Allen wrench)
Figure 2: Main components of the bed frame before mattress placement.
4. Setup and Assembly Instructions
Assembly is required for this product. It is recommended to have two people for assembly. Clear a spacious area and lay out all components on a soft, clean surface to prevent scratches.
- Attach Side Rails to Headboard: Align the side rails with the pre-drilled holes on the headboard. Secure them using the provided bolts, washers, and the Allen wrench. Do not fully tighten bolts until all connections are made.
- Attach Side Rails to Footboard: Connect the other end of the side rails to the footboard, aligning holes and securing with hardware. Ensure the frame is square before fully tightening all bolts.
- Install Center Support Beam and Legs: Attach any central support beams and their corresponding legs to the frame as indicated in the specific assembly diagram (not provided here, refer to included manual).
- Place Wood Slats: Distribute the wood slats evenly across the bed frame. Secure them to the side rails using the provided screws or clips. Ensure slats are firmly in place to provide adequate support.
- Final Tightening: Once all components are in place and aligned, fully tighten all bolts and screws.
Important: A box spring is required for use with this bed frame to ensure proper mattress support and longevity.
5. Usage Guidelines
- Ensure the bed is placed on a level surface to prevent wobbling or instability.
- Do not exceed the maximum weight capacity of 800 lbs.
- Regularly check and tighten all hardware to maintain structural integrity.
- Avoid jumping on the bed, as this can damage the frame and slats.
6. Maintenance and Care
- Fabric Upholstery: Spot clean fabric upholstery with a mild detergent and warm water. Blot gently; do not rub vigorously. Allow to air dry completely.
- Wood Components: Dust wood components regularly with a soft, dry cloth. Avoid using abrasive cleaners or excessive moisture, which can damage the wood finish.
- General: Keep the bed away from direct sunlight and heat sources to prevent fading or material degradation.
7. Specifications
| Brand | Modway |
| Model Number | MOD-5840-BEI |
| Product Dimensions | 86.5"L x 64.5"W x 47.5"H |
| Size | Queen |
| Color | Beige |
| Upholstery Fabric Type | Polyester |
| Frame Material | Solid Wood, LVL |
| Weight Limit | 800 Pounds |
| Assembly Required | Yes |
| Box Spring Required | Yes (not included) |
Figure 3: Product dimensions: 86.5"L x 64.5"W x 47.5"H.
Figure 4: Side profile of the Modway Amelia Queen Platform Bed.
8. Warranty Information
This Modway product comes with a limited warranty. For specific details regarding coverage, duration, and terms, please refer to the warranty card included with your purchase or contact Modway customer support.
9. Support and Contact
Should you require assistance with assembly, missing parts, or have any questions regarding your Modway Amelia Platform Bed, please contact Modway customer service. Contact information can typically be found on the packaging or the official Modway website.
For additional resources and product information, visit the Modway Store on Amazon.
