TAKARA TOMY ZOIDS ZW20 Dime Pulsar Instruction Manual

Introduction

The TAKARA TOMY ZOIDS ZW20 Dime Pulsar is a medium-sized Zoid model, designed to resemble a Dimetrodon. This model features motorized movement and an interactive "Wild Blast" function. This manual provides essential information for assembly, operation, and maintenance to ensure proper use and enjoyment of your Zoid.

Figure 1: Assembled ZW20 Dime Pulsar model.

Safety Information

Please read and understand all safety instructions before operating the ZW20 Dime Pulsar. Failure to follow these instructions may result in injury or damage to the product.

• Recommended Age: This product is suitable for individuals aged 6 years and older. Keep small parts away from younger children to prevent choking hazards.
• Battery Safety: Use only the specified battery type (AAA batteries × 1). Do not mix old and new batteries, or different types of batteries. Insert batteries with correct polarity (+/-). Remove batteries if the product will not be used for an extended period.
• Supervision: Adult supervision is recommended during assembly and initial operation.
• Moving Parts: Keep fingers, hair, and loose clothing away from moving parts during operation to avoid entanglement.

Package Contents

Verify that all components are present before beginning assembly:

• ZW20 Dime Pulsar Zoid model parts
• PVC Figure (Rider)
• Instruction Manual (this document)

Note: AAA batteries are not included and must be purchased separately.

Setup and Assembly

Follow the included assembly diagrams carefully. This section outlines the general steps for preparing your Zoid for operation.

1. Assembly

Assemble the Zoid model according to the detailed diagrams provided in the physical instruction booklet. Ensure all parts are securely connected. The assembly process is designed to be straightforward.

2. Battery Installation

1. Locate the battery compartment on the underside of the Zoid.
2. Using a small screwdriver (not included), open the battery compartment cover.
3. Insert one (1) AAA battery, ensuring the correct polarity (+/-) as indicated inside the compartment.
4. Replace the battery compartment cover and secure it with the screw.

Figure 2: Underside view, showing potential battery compartment location (illustration for reference).

3. Attaching the Rider Figure

Place the included PVC rider figure onto the designated seating area on the Zoid's back. Ensure it is seated securely.

Operating Instructions

Once assembled and batteries are installed, your ZW20 Dime Pulsar is ready for action.

1. Basic Movement

1. Locate the power switch, typically on the Zoid's side or underside.
2. Switch the power to the "ON" position.
3. The Zoid will begin to move forward, opening and closing its mouth, and swinging its neck and tail left and right.

Figure 3: Zoid in standard walking mode.

2. Wild Blast Activation (Instinct Liberation)

The Wild Blast feature is activated manually, transforming the Zoid for a powerful attack.

1. While the Zoid is moving, manually open the fins located on its back to the left and right.
2. Once the fins are open, the Zoid will continue to move forward, striking with its fins in a radio attack motion.

Figure 4: Zoid with fins beginning to open for Wild Blast.

Figure 5: Zoid with fins fully deployed during Wild Blast.

Figure 6: Zoid performing Wild Blast with rider.

Maintenance

Proper maintenance will extend the life and performance of your Zoid.

• Cleaning: Wipe the Zoid with a dry, soft cloth to remove dust and dirt. Do not use harsh chemicals or immerse in water.
• Storage: Store the Zoid in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
• Battery Replacement: Replace batteries when movement becomes sluggish or stops.

Troubleshooting

Specifications

• Model: ZW20 Dime Pulsar
• Brand: TOMY (Takaratomy)
• Product Dimensions: 12 x 8 x 10 inches
• Item Weight: 15.9 ounces
• Power Source: 1 x AAA Battery (not included)
• Recommended Age: 6 years and up
• Species Type: Dimetrodon

Warranty Information

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase. For specific warranty terms and conditions, refer to the documentation included in the product packaging or visit the official TOMY website.

Customer Support

For further assistance, troubleshooting, or inquiries regarding your ZW20 Dime Pulsar, please contact TOMY customer support.

• Online Support: Visit the official TOMY website for FAQs and support resources.
• Contact Information: Refer to the product packaging or the official TOMY website for current contact details (phone, email).