Introduction
The Delta Woodhurst Toilet Paper Holder, model 73250-SS, is designed to provide convenient and organized storage for toilet paper rolls in your bathroom. Its refined style and Brilliance Stainless finish complement a variety of bathroom decors, from traditional to contemporary. This wall-mounted holder features a pivoting arm for easy roll replacement, ensuring a functional and aesthetically pleasing addition to your space.

Setup and Installation
This toilet paper holder is designed for wall-mounted installation and includes all necessary hardware. For detailed instructions, refer to the official installation manual. The design allows for an easy, one-tool installation, particularly for drywall applications.
Installation Steps:
- Prepare the Mounting Location: Select a suitable wall location in your bathroom. Ensure the surface is clean and dry.
- Mark Drilling Points: Carefully measure and mark the precise drilling points on the wall according to the dimensions provided in the manual. Precision is crucial for proper alignment and secure mounting.
- Install Mounting Brackets: Drill pilot holes as indicated and secure the mounting brackets to the wall using the provided hardware. For drywall installations, specialized anchors may be required to ensure a solid attachment.
- Attach the Holder: Align the toilet paper holder with the installed mounting brackets and secure it using the set screws, typically tightened with an Allen wrench. Ensure the holder is level and firmly attached to prevent movement.


Operating Instructions
The Delta Woodhurst Toilet Paper Holder features a convenient pivoting arm mechanism, designed for effortless replacement of toilet paper rolls.
Replacing the Toilet Paper Roll:
- Pivot the Arm: Gently lift the pivoting arm of the holder upwards. The arm will swing away from the wall, creating space to remove the empty roll.
- Remove/Insert Roll: Slide the empty toilet paper roll off the arm. Place a new standard-sized toilet paper roll onto the arm.
- Return the Arm: Lower the pivoting arm back into its horizontal position until it rests securely. The new roll is now ready for use.

Maintenance
To ensure the longevity and appearance of your Delta Woodhurst Toilet Paper Holder, follow these simple maintenance guidelines:
- Cleaning: Clean the surface regularly with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or polishes, as these can damage the Brilliance Stainless finish.
- Drying: After cleaning, dry the holder thoroughly with a soft, dry cloth to prevent water spots and maintain its luster.
- Inspection: Periodically check the mounting screws and connections to ensure they remain tight. If any looseness is detected, gently tighten the screws.
The Brilliance Stainless finish is designed to resist corrosion, tarnishing, and discoloration, ensuring a lasting aesthetic with proper care.
Troubleshooting
This section addresses common issues you might encounter with your toilet paper holder.
- Holder Feels Loose or Wobbly:
- Cause: Mounting screws may have loosened over time, or the initial installation was not sufficiently secure.
- Solution: Re-tighten the set screws that secure the holder to the wall mounts. If the issue persists, the mounting anchors in the wall may need to be reinforced or replaced, especially if installed directly into drywall without adequate support. Consider installing into a wall stud or using heavy-duty drywall anchors.
- Toilet Paper Roll Does Not Pivot Smoothly:
- Cause: Accumulation of dust or debris in the pivoting mechanism, or misalignment during installation.
- Solution: Clean the pivoting joints with a soft, dry cloth to remove any obstructions. Ensure the holder was installed level and that the mounting points are not causing undue stress on the pivoting mechanism.
- Finish Discoloration or Spots:
- Cause: Use of abrasive cleaners, harsh chemicals, or prolonged exposure to moisture.
- Solution: Refer to the maintenance section. Use only soft cloths and mild soap and water for cleaning. Dry the surface immediately after cleaning. The Brilliance Stainless finish is designed to resist these issues under normal use and proper care.
Specifications
| Feature | Detail |
|---|---|
| Brand | DELTA |
| Model Number | 73250-SS |
| Material | Zinc |
| Finish Type | Brushed |
| Color | Stainless |
| Installation Type | Wall Mounted |
| Product Dimensions | 8.39"L x 3.39"W |
| Item Weight | 1.12 pounds (0.51 Kilograms) |
| Included Components | Toilet paper holder, installation instructions, hardware |
| Special Features | Durable |
| UPC | 034449871556, 885785849385 |
| Date First Available | October 15, 2018 |
Warranty
The Delta Woodhurst Toilet Paper Holder is backed by a Limited Lifetime Warranty. This warranty covers defects in material and manufacturing for the original consumer purchaser. For specific terms, conditions, and claim procedures, please refer to the official warranty documentation included with your product or contact Delta customer support.

Support
For further assistance, detailed installation guides, or to explore other Delta products, please use the resources below:
- Official User Guide (PDF): Download User Guide
- Installation Manual (PDF): Download Installation Manual
- Visit the DELTA Store: Explore more products and collections




