1. Introduction
This manual provides essential instructions for the safe and effective use of the MOREL Black Toner Refill Kit. This product is designed to replenish toner in compatible HP LaserJet and Canon LBP/MF series printer cartridges, offering a cost-effective solution for maintaining print quality.
Image of the MOREL Black Toner Refill Kit bottle, showing the brand logo, product name, compatible printer models, net weight (50 gms), and manufacturer contact information.
2. Safety Information
- Keep toner powder out of reach of children and pets.
- Avoid inhaling toner dust. Use in a well-ventilated area.
- If toner comes into contact with skin, wash thoroughly with soap and water.
- If toner gets into eyes, flush immediately with plenty of water and seek medical attention if irritation persists.
- Do not dispose of toner powder in regular household waste. Follow local regulations for disposal.
- Store the toner bottle in a cool, dry place, away from direct sunlight and heat.
3. Package Contents
- One (1) bottle of MOREL Black Toner Refill Powder (Net Weight: 50 gms)
4. Compatible Printers
This MOREL Black Toner Refill Kit is compatible with the following printer models:
HP LaserJet Series:
- CP1215, 1515, 1518
- CM1312
- CP1525
- CP2025
- CM3530, 2320, 1415
- CP3525
- CP5225
- CP1025
Canon LBP/MF Series:
- LBP 5050, 5460, 7070, 7200, 7750, 9100, 9500, 9600
- MF8030, 8050, 8330C, 8350
5. Setup (Toner Refill Procedure)
Refilling toner cartridges requires careful handling and specific tools, which are not included with this refill kit. It is recommended to consult a professional or refer to a detailed guide specific to your printer cartridge model before attempting to refill. The following steps are general guidelines:
- Preparation: Ensure you are in a well-ventilated area. Lay down newspaper or a protective sheet to catch any spilled toner. Wear gloves and a dust mask to prevent skin contact and inhalation.
- Remove Cartridge: Carefully remove the toner cartridge from your printer according to your printer's manual.
- Locate Refill Port/Opening: Identify the refill port or the area where the cartridge can be opened to add toner. This often involves drilling a small hole or removing a plug. Refer to a specific guide for your cartridge model.
- Empty Residual Toner: If possible, empty any remaining old toner from the cartridge. This helps prevent mixing different toner types, which can affect print quality.
- Refill Toner: Slowly and carefully pour the MOREL Black Toner Powder into the cartridge's refill port. Avoid overfilling.
- Seal Cartridge: Securely seal the refill port. If a hole was drilled, use appropriate sealing tape or a plug.
- Clean Cartridge: Gently clean the exterior of the cartridge to remove any spilled toner.
- Reinstall Cartridge: Reinstall the refilled cartridge into your printer.
- Test Print: Perform a test print to verify proper functionality and print quality.
Note: Improper refilling can damage the cartridge or printer. Proceed with caution.
6. Operating (Usage Tips)
- For optimal print quality, ensure your printer drivers are up to date.
- Use high-quality paper suitable for laser printers.
- If print quality degrades after refilling, check for any toner leaks or blockages within the cartridge.
- Do not expose the toner cartridge to direct sunlight or strong light for extended periods, as this can damage the drum.
7. Maintenance
- Storage: Store the toner refill bottle in its original packaging in a cool, dry place, away from direct sunlight and extreme temperatures.
- Handling: Always handle the toner bottle and refilled cartridges carefully to avoid spills.
- Disposal: When the toner bottle is empty, dispose of it responsibly according to local environmental regulations. Do not incinerate.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Faint or streaky prints | Low toner level, uneven toner distribution, or drum unit issue. | Ensure cartridge is adequately filled. Gently shake the cartridge to redistribute toner. Inspect drum unit for damage. |
| Black spots or lines on prints | Dirty drum unit or fuser. | Clean the drum unit carefully. If problem persists, the drum unit may need replacement. |
| Toner leakage | Improper sealing after refill, damaged cartridge. | Re-check the refill port seal. If cartridge is damaged, it may need replacement. |
| Printer not recognizing cartridge | Chip issue (if applicable) or improper installation. | Remove and reinsert the cartridge. Ensure any chip is clean and properly seated. Some refilled cartridges may require chip replacement or resetting. |
9. Specifications
- Brand: MOREL
- Model Number: HP1215-BOTTLE-50G-BLACK
- Product Type: Toner Refill Powder
- Color: Black
- Net Weight: 50 gms
- Manufacturer: MOREL IMAGETONE SOLUTIONS PVT LTD.
- Item Weight (Product): 70 g (as per packaging/listing)
- Date First Available: 9 January 2019
10. Warranty and Support
For product support, inquiries, or assistance, please contact MOREL IMAGETONE SOLUTIONS PVT LTD. directly:
- Email: moreltoners@gmail.com
- Phone: 9833204801 / 9967795338
- Address: DAHISAR EAST, MUMBAI - 68
Please note that specific warranty terms may apply. Retain your purchase receipt for any warranty claims.
