Progress Lighting Fan and Light Universal Remote Control (Model P2662-01)

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Progress Lighting Universal Fan and Light Remote Control, model P2662-01. This remote control is designed to provide convenient control over your ceiling fan's speed and light functions, including full-range dimming, for single-pole applications.

Image 1: The Progress Lighting Universal Remote Control (P2662-01). This remote features dedicated buttons for light control and fan speed adjustments.

2. Safety Information

WARNING: Please read all instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Always disconnect power at the circuit breaker before installing or servicing the remote control or receiver.
• Ensure all electrical connections comply with local codes and ordinances.
• This product is intended for indoor use only.
• Do not use with solid-state fan speed controls.
• Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

3. Setup and Installation

The universal remote control system includes a handheld remote, a wall mount, and a receiver unit. Proper installation of the receiver unit within the fan canopy and synchronization with the remote are essential for correct operation.

3.1 Package Contents

• Handheld Remote Control
• Receiver Unit
• Wall Mount Bracket
• 12V Battery (included)
• Installation Sheet

Image 2: Components of the universal remote control system, including the remote, receiver, and wall mount.

3.2 Setting DIP Switches

Before installing the receiver, you must set the DIP switches on both the remote control and the receiver unit to the same combination. This ensures proper communication between the two devices and prevents interference from other remote-controlled devices in your home.

1. Locate the battery compartment on the back of the remote control. Open it to access the DIP switches.
2. Locate the DIP switches on the receiver unit. These are typically small switches that can be set to an 'ON' or 'OFF' position.
3. Choose any combination of 'ON' and 'OFF' settings for the DIP switches. Ensure the exact same combination is set on both the remote control and the receiver unit.
4. Close the battery compartment on the remote control.

3.3 Battery Installation

The remote control requires one 12V battery (included). To install or replace the battery:

1. Open the battery compartment cover on the back of the remote control.
2. Insert the 12V battery, ensuring the positive (+) and negative (-) terminals are correctly aligned.
3. Close the battery compartment cover securely.

3.4 Receiver Installation (Professional Installation Recommended)

The receiver unit must be installed within the canopy of your ceiling fan. This process involves working with electrical wiring and should ideally be performed by a qualified electrician.

1. Disconnect power to the ceiling fan at the circuit breaker.
2. Remove the ceiling fan canopy to access the wiring.
3. Wire the receiver unit according to the wiring diagram provided in the separate installation sheet. Typically, this involves connecting the receiver's input wires to the household supply and its output wires to the fan and light fixtures.
4. Carefully tuck the receiver unit into the fan canopy, ensuring no wires are pinched.
5. Reattach the fan canopy.
6. Restore power at the circuit breaker.

3.5 Wall Mount Installation

The included wall mount allows for convenient storage of your remote control.

1. Choose a suitable location on a wall.
2. Use screws (not included) to secure the wall mount bracket to the wall.
3. Place the remote control into the mounted bracket.

4. Operating Instructions

Once the remote and receiver are properly installed and synchronized, you can operate your ceiling fan and light using the handheld remote.

• Light Button (Bulb Icon): Press to turn the light ON or OFF. Press and hold to dim or brighten the light (full range dimming).
• Fan Speed Buttons (1, 2, 3 Dots):
  • One Dot: Low fan speed.
  • Two Dots: Medium fan speed.
  • Three Dots: High fan speed.
• Fan OFF Button (Square Icon): Press to turn the fan OFF.

5. Maintenance

To ensure the longevity and proper functioning of your remote control:

• Battery Replacement: Replace the 12V battery when the remote's indicator light dims or the remote becomes unresponsive. Refer to Section 3.3 for battery installation.
• Cleaning: Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or allow moisture to enter the unit.
• Storage: Store the remote in a dry place, away from extreme temperatures.

6. Troubleshooting

7. Specifications

Image 3: Dimensional drawing of the remote control (4-1/2" x 2-3/8") and receiver unit.

8. Warranty Information

This Progress Lighting product is covered by a 1-year limited warranty from the date of purchase. This warranty guarantees your satisfaction and covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact Progress Lighting customer service.

9. Customer Support

For technical assistance, replacement parts, or any questions regarding your Progress Lighting Universal Remote Control, please visit the official Progress Lighting store or contact their customer service department.

Visit the Progress Lighting Store on Amazon