1. Product Overview
The Zerone Universal Steering Wheel Remote Control is designed to provide convenient control over various in-car entertainment systems, including CD, DVD, and TV players. This device attaches to your steering wheel, allowing for easy access to common remote functions without diverting attention from the road. It features a high-compatibility infrared chip and re-writable memory for custom programming.
Figure 1: The Zerone Universal Steering Wheel Remote Control, showing its compact design and button layout.
2. Key Features
- Steering Wheel Mounting: Designed for secure attachment to the steering wheel, enhancing user convenience and safety during operation.
- High Compatibility: Equipped with a high-compatibility chip capable of copying infrared signals from over 95% of remote controllers on the market.
- Re-writable EEPROM Technology: Utilizes EEPROM technology, allowing functions to be copied and re-written up to 100,000 times or more.
- Memory Capacity: Built-in high-capacity memory supports up to 10 key functions, covering common remote control operations for car systems.
- Easy Copy Function: The copying process is straightforward and accurate. Programmed functions are saved permanently until manually erased.
- Low Power Consumption: Powered by a built-in 3V twist button battery, designed for efficient energy use.
Figure 2: The remote control highlighting its compatibility with various car entertainment systems such as Car CD, Car DVD, Car TV/GPS, and Car MP3 players.
3. Setup and Installation
3.1 Component Identification
Figure 3: Diagram illustrating key components of the remote control, including the SET button (Copy Start/Save), 8 replicated keys, Copy work indicator, Infrared remote launch window, and Battery cover.
3.2 Physical Installation
Follow these steps to securely attach the remote control to your steering wheel:
- Identify the fixed buckle on the back of the remote control.
- Position the remote control on your steering wheel at a comfortable and accessible location.
- Wrap the strap around the steering wheel and secure it using the fixed buckle. Ensure the remote is firmly attached and does not obstruct driving.
Figure 4: Step-by-step visual guide for installing the remote control onto a steering wheel, showing how to secure the strap and position the device.
3.3 Programming Instructions (Copy Function)
The remote control learns functions from your existing infrared remote. Ensure your original remote has working batteries and is within close proximity.
- Enter Learning Mode: Press and hold the SET button on the steering wheel remote control until the Copy work indicator light illuminates steadily.
- Select Target Button: Press the button on the steering wheel remote control that you wish to program (e.g., Volume Up). The indicator light will flash slowly.
- Transmit Signal: Point your original remote control's infrared emitter directly at the Infrared remote launch window of the steering wheel remote control (refer to Figure 3). Press and hold the corresponding button on your original remote (e.g., Volume Up).
- Confirmation: The indicator light on the steering wheel remote control will flash rapidly and then turn off, indicating successful programming.
- Repeat: Repeat steps 2-4 for each button you wish to program.
- Exit Learning Mode: After programming all desired buttons, press the SET button again to save the settings and exit learning mode. The indicator light will turn off.
Note: If the indicator light does not flash rapidly or programming fails, ensure the original remote's batteries are strong and the remotes are properly aligned and close to each other. Try programming in a different location to avoid interference. Some infrared signals may be more difficult to copy than others.
4. Operating Instructions
Once programmed and installed, the Zerone Universal Steering Wheel Remote Control functions like your original remote. Simply press the programmed buttons to control your car's CD, DVD, or TV player. Ensure the Infrared remote launch window (refer to Figure 3) has a clear line of sight to your car's entertainment system receiver for optimal performance.
Figure 5: The remote control positioned on a steering wheel, demonstrating its ergonomic placement for convenient access during driving.
5. Maintenance
5.1 Battery Replacement
The remote control uses a 3V twist button battery. If the remote stops responding or the indicator light does not illuminate, the battery may need replacement.
- Locate the battery cover on the side of the remote control (refer to Figure 3).
- Carefully open the battery cover using a small tool if necessary.
- Remove the old battery and insert a new 3V twist button battery, ensuring correct polarity.
- Close the battery cover securely.
5.2 Cleaning
Wipe the remote control with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the surface or internal components.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote does not respond. | Low or dead battery. | Replace the 3V twist button battery (see Section 5.1). |
| Cannot program buttons. | Original remote battery is low; remotes not aligned; signal interference; specific IR signal not compatible. | Ensure original remote has fresh batteries. Align remotes closely (within 1-2 cm) and point directly at each other. Try programming in a different location to avoid interference. Some complex IR signals may not be fully compatible. |
| Programmed buttons do not control the car system. | No clear line of sight to receiver; incorrect programming; car system uses RF instead of IR. | Ensure the remote's infrared emitter has a clear path to your car system's IR receiver. Re-program the buttons carefully. Verify your car system uses infrared (IR) remote control. This device is not compatible with Radio Frequency (RF) controlled systems. |
| Remote falls off steering wheel. | Strap not secured properly. | Re-install the remote, ensuring the strap is tightly secured around the steering wheel (see Section 3.2). |
7. Specifications
- Brand: Zerone
- Model: B07MP4GW6Q
- Color: Black
- Special Feature: Universal Infrared Remote Control
- Max Number of Supported Devices: 1 (per programming session)
- Compatible Devices: Car CD Player, Car DVD Player, Car TV Player
- Item Weight: 1.41 ounces (approximately 40 grams)
- Power Source: 3V Twist Button Battery (CR2032 equivalent)
- Technology: Infrared (IR)
8. Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or contact Zerone customer service directly. Contact details can typically be found on the product packaging or the official Zerone website.
