New Replacement Remote Control for Samsung HW-F450/ZA HW-F450 PS-WF450 HW-F355 Soundbar User Manual

Product Overview

This replacement remote control is designed for use with Samsung HW-F450/ZA, HW-F450, PS-WF450, and HW-F355 Soundbar models. It features a slim and sleek design for comfortable handling. This remote offers stable performance and is ready for use without any complex setup or programming.

Setup and Battery Installation

The BOMAZ replacement remote control is designed for immediate use with compatible Samsung soundbar models without requiring any programming. Simply install the batteries to begin operation.

Battery Installation

1. Locate the battery compartment on the back of the remote control.
2. Slide open the battery compartment cover.
3. Insert two (2) AAA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
4. Close the battery compartment cover securely.

Note: No programming or pairing is required for this remote control. It is designed to work directly with the specified Samsung soundbar models.

Operating Instructions

This section details the functions of the buttons on your replacement remote control.

Figure 1: Layout of the BOMAZ Replacement Remote Control.

This image displays the full layout of the black replacement remote control. Key buttons include Power, TV Power, Source, Volume, Mute, and various sound effect controls, all clearly labeled in white text on gray buttons.

Button Functions

• POWER (Red Button, Top Left): Turns the soundbar power on or off.
• TV POWER (Red Button, Top Right): Turns the connected TV power on or off.
• AUTO POWER: Controls the automatic power-on/off feature of the soundbar.
• SOURCE: Cycles through available input sources (e.g., D.IN, AUX, HDMI).
• SPEAKER: Adjusts speaker settings or modes.
• TV SOURCE: Changes the input source on the connected TV.
• SoundShare: Activates or deactivates the SoundShare feature for compatible Samsung TVs.
• REPEAT: Controls repeat playback functions (if applicable to the soundbar's media playback).
• Anynet+: Activates or deactivates the Anynet+ (HDMI-CEC) function for integrated control with compatible Samsung devices.
• TV VOL (+/-): Increases or decreases the volume of the connected TV.
• TV CH (Up/Down): Changes the channel on the connected TV.
• AUDIO SYNC: Adjusts audio delay to synchronize with video.
• TV MUTE: Mutes or unmutes the sound of the connected TV.
• TV INFO (i): Displays information about the current TV program or input.
• TV PRE-CH: Returns to the previously viewed TV channel.
• DIMMER: Adjusts the brightness of the soundbar's display.
• Playback Controls (Rewind, Stop, Play/Pause, Fast Forward): Controls media playback if the soundbar supports it.
• SOUND EFFECT: Cycles through various sound effects or modes (e.g., Standard, Music, Cinema).
• VOL (+/-): Increases or decreases the soundbar's volume.
• SMART VOLUME: Activates or deactivates the Smart Volume feature, which automatically adjusts volume levels.
• S/W LEVEL (Left/Right): Adjusts the subwoofer level.
• MUTE: Mutes or unmutes the soundbar's audio output.
• 3D SOUND PLUS: Activates or deactivates the 3D Sound Plus feature for enhanced spatial audio.
• DRC (Dynamic Range Control): Activates or deactivates Dynamic Range Control, which compresses audio for consistent volume levels.

Troubleshooting

If you encounter issues with your remote control, please refer to the following common troubleshooting steps:

• Remote Not Responding:
  • Ensure batteries are inserted correctly with the proper polarity.
  • Replace old batteries with new AAA batteries.
  • Check for any obstructions between the remote control and the soundbar's infrared receiver.
  • Ensure you are within the operable distance (more than 8 meters) and pointing the remote directly at the soundbar.
• Specific Buttons Not Working:
  • Clean the remote control's surface and buttons with a soft, dry cloth to remove any dirt or debris.
  • Verify that the soundbar model is compatible with this remote control (HW-F450/ZA, HW-F450, PS-WF450, HW-F355).
• Interference:
  • Other electronic devices emitting infrared signals might cause interference. Try operating the remote in a different environment.

If the problem persists after attempting these steps, please contact customer support for further assistance.

Product Specifications

Warranty and Support

This BOMAZ replacement remote control comes with a 30-day warranty from the date of purchase.

We test every remote before shipment to ensure quality. If the remote control you receive has a problem or you require assistance, please feel free to contact us. Our customer support team is available to help resolve any issues you may encounter.

For support inquiries, please refer to the contact information provided by your retailer or on the product packaging.