Easytry123 Replacement Remote Control User Manual

Introduction

This manual provides instructions for the Easytry123 replacement infrared remote control. This remote is designed to function as a direct replacement for specific Onkyo A/V AV Receiver models and their original remote controls. Please review this manual thoroughly before use.

Important: This replacement remote may not offer all functions present on your original remote control. Please ensure your original remote visually matches the product images provided and that your receiver model is listed as compatible.

Image: Front view of the Easytry123 replacement remote control. This image displays the general layout and appearance of the remote.

Setup

Battery Installation

The remote control requires two (2) AA batteries for operation. Batteries are not included with the remote.

1. Locate the battery compartment on the back of the remote control.
2. Slide the battery compartment cover downwards or press the latch and lift to remove it.


Image: Back view of the remote control with the battery cover installed. The cover needs to be removed to access the battery compartment.

3. Insert two (2) AA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.


Image: Back view of the remote control with the battery cover removed, showing the battery compartment ready for AA battery insertion. Note the polarity markings.

4. Replace the battery compartment cover by sliding it back into place until it clicks securely.

After battery installation, the remote control is ready for use with your compatible Onkyo A/V AV Receiver.

Operating Instructions

This Easytry123 replacement remote control is an infrared (IR) device designed to operate specific Onkyo A/V AV Receivers. No programming is typically required; simply insert batteries and point the remote towards your receiver.

Basic Operation

• Power: Press the POWER button to turn your Onkyo receiver on or off.
• Volume Control: Use the VOLUME UP and VOLUME DOWN buttons to adjust the audio level.
• Input Selection: Use the input selector buttons (e.g., CD, DVD, HDMI, TUNER) to switch between different audio/video sources connected to your receiver.
• Navigation: Use the directional arrow buttons (UP, DOWN, LEFT, RIGHT) and the ENTER or OK button for menu navigation on your receiver's display.

Note on Compatibility: This remote is a replacement and is intended to mimic the functions of the original remote for the listed Onkyo A/V AV Receiver models. For optimal performance, ensure your receiver model is one of the compatible models: HT-R393, HT-S5405B, HT-R670, PR-SC5508.

Maintenance

Cleaning the Remote

To clean the remote control, gently wipe its surface with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the remote's finish or internal components.

Battery Care

• Replace batteries when the remote's performance degrades or stops functioning.
• Always replace both batteries at the same time with new ones of the same type (AA).
• Do not mix old and new batteries, or different types of batteries.
• If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage.
• Dispose of used batteries according to local regulations.

Troubleshooting

Remote is not responding:

• Ensure the remote has fresh AA batteries installed correctly, observing polarity (+/-).
• Check if there are any obstructions between the remote control and the Onkyo A/V AV Receiver's infrared sensor.
• Verify that you are within the effective range and pointing the remote directly at the receiver.
• Confirm that your Onkyo receiver model is listed as compatible with this replacement remote.

Some functions are not working:

• As a replacement remote, it may not support all advanced or specific functions of your original remote. This is normal for some universal or replacement remotes.
• Refer to your Onkyo receiver's original manual to confirm if the function requires a specific button or sequence not present on this replacement remote.

Specifications

Note: The specification "Compatible Devices: DVD/Blu-ray Player" found in some product listings may be a general category. This remote is specifically designed for the listed Onkyo A/V AV Receiver models.

Warranty and Support

Product Support

For any questions, concerns, or issues regarding your Easytry123 replacement remote control, please contact the seller directly. The seller, Easytry123, is available to assist with product inquiries.

Return Policy

This product is subject to a 30-day return policy. Please refer to your purchase platform for specific details on initiating a return or replacement within this period.