Armor All Glass Wipes Model 18275 User Manual

Introduction

The Armor All Glass Wipes are designed to provide a quick and effective solution for cleaning automotive glass surfaces. These wipes are formulated to deliver crystal-clear, streak-free results, removing common contaminants such as filmy residue, road grime, bugs, and fingerprints. The ammonia-free composition ensures safety for use on factory-tinted glass and other delicate auto glass surfaces.

Image: A 20-count pack of Armor All Glass Wipes, featuring the brand logo and a graphic of a car windshield, highlighting "Crystal-Clear, Streak-Free Shine."

Safety Information

Please read and understand all safety information before using this product.

• Ingredients: Contains Titanium Dioxide and Isopropanol.
• Eye Contact: Avoid contact with eyes. In case of contact, flush thoroughly with water for several minutes. If irritation persists, seek medical attention.
• Skin Contact: Prolonged or repeated skin contact may cause irritation. Wash hands thoroughly after use.
• Ingestion: Do not ingest. If swallowed, do not induce vomiting. Call a poison control center or doctor immediately.
• Keep Out of Reach of Children and Pets: Store in a secure location away from children and animals.
• Flammability: Keep away from open flames and sources of ignition.
• Disposal: Dispose of used wipes and packaging according to local regulations. Do not flush wipes.

Setup and Preparation

Before using Armor All Glass Wipes, ensure the vehicle's glass surfaces are cool to the touch and out of direct sunlight to prevent premature drying and streaking.

1. Open Package: Locate the resealable sticker or flap on the package. Carefully peel it back to open.
2. Remove Wipe: Pull out one wipe from the package.
3. Reseal Package: Immediately reseal the package firmly to prevent the remaining wipes from drying out.

Operating Instructions

Follow these steps for optimal cleaning results on your vehicle's glass surfaces.

1. Wipe Surface: Gently wipe the glass surface with the Armor All Glass Wipe. Use a consistent, overlapping motion to ensure full coverage.
   

   Image: A woman using an Armor All Glass Wipe to clean the interior of a car window, demonstrating the product's ability to achieve crystal-clear, streak-free glass.

2. Clean Until Clear: Continue wiping until the surface is clean and free of dirt, grime, and fingerprints. The formula is designed to leave no streaking or hazing.
   

   Image: A visual representation of Armor All Glass Wipes quickly removing dirt, fingerprints, and insects from a glass surface, emphasizing its cleaning power.
3. Safe for Various Surfaces: These wipes are safe for use on car windows, factory-tinted glass, mirrors, and even tech screens such as smartphones, GPS devices, and computer screens within the vehicle.
   

   Image: A hand wiping a car window, illustrating that the wipes are safe for car windows, tinted glass, and mirrors.

   

   Image: A hand wiping a car's infotainment screen, demonstrating the product's safety for tech screens including smartphones, GPS, and computer screens.

4. Ammonia-Free Formula: The wipes are ammonia-free, ensuring they will not damage delicate surfaces or leave harsh chemical odors.
   

   Image: A woman cleaning a car's side mirror with an Armor All Glass Wipe, highlighting the "Ammonia Free" formulation specially designed for auto glass.
5. Discard Wipe: After use, discard the wipe in a trash receptacle. Do not flush.

Maintenance and Storage

• Reseal Promptly: Always reseal the package immediately after removing a wipe to prevent the remaining wipes from drying out.
• Storage Conditions: Store the package in a cool, dry place, away from direct sunlight and extreme temperatures. High temperatures can cause the wipes to dry prematurely.
• Shelf Life: For best performance, use wipes within the recommended shelf life indicated on the packaging.

Troubleshooting

• Wipes are Dry: If wipes appear dry, ensure the package was properly sealed after previous use. Store in a cool, dry place. If wipes are completely dry upon opening a new package, contact customer support.
• Streaking Occurs: Streaking can occur if the glass surface is too hot, if too much product is applied, or if the wipe is overly saturated or too dry. Try cleaning on a cooler surface, using a fresh wipe, and wiping until completely dry.
• Insufficient Cleaning: For heavily soiled surfaces, a pre-clean with a general automotive cleaner may be necessary before using glass wipes for a streak-free finish.

Specifications

Warranty and Support

For information regarding product warranty, returns, or customer support, please refer to the official Armor All website or contact their customer service directly. Specific warranty details are not provided in this manual.

Manufacturer: Armored AutoGroup